Dvipusis, 3,50 m H, 1,20 m ilgio rankos, 750 kg

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Gamybos metai: 2021, būklė: naujas, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW – : Price ex stock incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Shipping within Germany (excluding islands): €550 (net)! Of course, you can build longer or shorter racking units by omitting or purchasing additional frames (or by adjusting the bay width), the example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 Njdpfx Aheddmq Ts Uolb with 2x3 adjustable arms of 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity at load center of 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, bay width = 1,300mm. Standard is 1.30m. Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! For bay widths from 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay widths) are also available on request, subject to surcharge and longer delivery times as these are made to order! If you do not specify a different bay width, we will supply the rack with a bay width of 1.30m. In this case, the length of one row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, types of arms, etc.) available on request! Please contact us! Photos show a similar rack!

Būklė: naujas, Glazing Bead Nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner joints are closed - No open glazing bead gaps - No color discrepancies during paint finishing - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Staple Corner Joining Machine for stapling glazing bead frames. Option to select between automatic and manual operation; With angle stop, clamping device from above and in front. Pressure can be regulated separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table. Operation via foot pedal. ----- Price for this configuration upon request! Plus statutory VAT and packaging/shipping ----- Pictures show the 2P Staple Corner Joining Machine with the optional mobile work table (see details under surcharge options). Surcharges: ----- Mobile work table Height-adjustable from 700 to 1,000 mm, 2 plug-in support rails, 1,000 mm long, 2 swiveling and sliding support rails, 1,000 mm, all rails covered with felt, 4 swivel castors, 2 of which with brake. ----- Surcharge: €1,311.00 net Staples: packages Nljdpsvnh T Nofx Ah Usb 15 mm staples (pack of 2,000 pcs): Price €22.00 12 mm staples (pack of 3,000 pcs): Price €32.00 10 mm staples (pack of 3,000 pcs): Price €32.00 Dimensions and weights ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping. (Technical data as per manufacturer's information - subject to change!)

Gamybos metai: 2021, būklė: naujas, 1 racking unit with 4 uprights: €2,120 (net, ex VAT)! Surcharge for cantilever arms with deflectors for this rack: €40 Nljdpfoddmqnsx Ah Usb Transport price within Germany (excluding islands): €490 (net, ex VAT)! Of course, you can also create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the upright spacings); the example given with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Single-sided rack uprights, approx. 3,500 mm high, hot-dip galvanized Base and arm depth: 1,200 mm with 3 height-adjustable arms each Load capacity at load center 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg total load With longitudinal and diagonal bracing, spacing = 1,300 mm (standard is 1.30 m). Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50 m upwards, a small surcharge will apply to the listed price. Special dimensions (other upright spacings) are also available upon request, incurring additional costs and longer delivery times as they are custom-fabricated. If you do not specify a different upright spacing, we will deliver the rack with a spacing of 1.30 m. For this configuration, a single rack row with 4 uprights (3 sections) is approximately 4m long. Supplied with all bolts and nuts (shipped within Germany via parcel service directly from Würth), floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available – please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €2,899 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (or by varying the bay spacing); this example with 4 frames is just the most common racking solution! A galvanized cantilever racking system, consisting of: • 4 double-sided uprights approx. 3.50m high, hot-dip galvanized • IPE 160 / 80 • Each with 2x3 adjustable arms, 1.20 m, 500kg load capacity per arm • With braces approx. 1.30 m • Double-sided uprights approx. 3500mm high, hot-dip galvanized • Base and arm depth 1200 mm, each upright with 3 height-adjustable cantilever arms • Load capacity at load center 600mm: 500kg per arm / 2250kg per upright side • With longitudinal and diagonal bracing, bay spacing (e) = 1300mm, standard is 1.30m • Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m • From 1.50m bay length upwards, a small surcharge applies to the quoted price • Special sizes (other bay spacings) are available on request, but incur an additional cost and have a longer delivery time as they must be custom manufactured Nledpfjddmtcox Ah Uob • Unless otherwise specified, the racking will be supplied with a bay spacing of 1.30m • With 4 upright frames (3 bays), the total length is approx. 4m • Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Būklė: geras (naudotas), Gamybos metai: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation Nsdeh N Thwjpfx Ah Uslb -Drive power: 4 kW -Max. cutting width: 785 mm -Max. cutting height: 475 mm -Saw blade length: 5600 mm -Working table: tiltable -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 500kg per arm – New: Price ex location including loading! 1 rack unit with 4 uprights: €1,833 (net)! Njdpfsddmpvsx Ah Ujlb Transport price within Germany (excluding islands): €500 (net)! Naturally, by omitting or purchasing additional frames, you can build longer or shorter rack units (or by varying the axis spacing). This example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - Single-sided upright approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1200 mm each with 3 height-adjustable arms per upright - Load capacity at 600mm load center: 500 kg per arm / 2250 kg per upright - With 4 uprights per storage level: 4 x 500 kg = 2,000 kg, arms IPE 80 - Includes longitudinal and diagonal bracing, center spacing = 1300 mm, standard is 1.30m Other standard center spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! For lengths from 1.50m an additional surcharge applies to the stated price! Special dimensions (other center spacings) are also available upon request, but carry a surcharge and longer delivery times since they are custom manufactured! If you do not specify a different center spacing, we will supply the rack with a 1.30m center spacing. In this case, a rack row with 4 uprights (3 bays) is approx. 4m long. Delivered with all screws and nuts (shipment within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm length, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever racking, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW – : Price ex stock including loading! 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (mainland only): €550 (net)! Nodpfsddmqyjx Ah Uolb Of course, you can also construct longer or shorter racking units by omitting or purchasing additional uprights (or by using different bay distances). The example with 4 uprights is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided racking uprights, approx. 5.18m high, hot-dip galvanized - IPE 180 / 100 - Each upright with 2 x 3 adjustable arms, 1.20m long, 860kg load capacity per arm - Includes bracing, approx. 1.30m spacing - Uprights double-sided, approx. 5180mm high, hot-dip galvanized - Foot and arm depth 1200mm with 3 height-adjustable arms per side - Load capacity with 600mm load center: 860kg per arm / 2,600kg per upright side - With horizontal and diagonal bracing, bay distance = 1,300mm (standard is 1.30m) - Other standard bay distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m upwards, a small surcharge applies to the listed price! - Special dimensions (different bay distances) are available on request, but are also subject to a surcharge and have a longer delivery time as they must be made to order! - If you do not specify a different bay distance, the racking will be supplied with a 1.30m bay distance. - With 4 uprights (3 bays), the total row length is approx. 4m. - Supplied with all bolts and nuts (shipping within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar racking system!

Būklė: labai geros būklės (naudotas), Direct drive Airflow: 12,000 m³/h Negative pressure: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Outlet diameter: 400 mm Nledpfx Aoh Tfqhoh Ujb Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Used machinery notice: • Technical data subject to error and prior sale. • Quoted prices are ex works - loading included! • The machine has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to enquiries which include your address and telephone number!)

Gamybos metai: 2021, būklė: naujas, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New item: Price ex-works including loading! 1 rack unit with 4 uprights: €2,300 (net)! Shipping cost within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter rack units by removing or purchasing additional frames (or by adjusting the frame spacing); this example with 4 frames is just the most common configuration! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Nsdpfoddmp Uox Ah Uelb Single-sided uprights approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms Load capacity with load center at 600 mm: 750 kg per arm / 2250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, e = 1300 mm. Standard is 1.30m – if you do not specify otherwise, the racking will be supplied with a 1.30m frame spacing. Other spacings available, e.g. 1.0m, 1.25m, or for a small extra charge, 1.50m or custom dimensions! Standard delivery length for a rack row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 750kg per arm – new unit: Price ex location including loading! 1 rack unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with stoppers for this rack: €40 Nljdpsddmp Ajfx Ah Usb Transport cost within Germany (excluding islands): €430 (net)! Of course, by omitting or purchasing additional uprights, you can assemble longer or shorter rack units (also by varying the bay distances); this example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth: 1,200 mm, each with 3 height-adjustable rack arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per load level: 4 x 750 kg = 3,000 kg, arms made of IPE 100, Including longitudinal and diagonal bracing, bay width = 1,300 mm (standard is 1.30 m – if you do not specify otherwise, we will deliver the rack at a bay width of 1.30 m. Other bay widths are possible, e.g. 1 m, 1.25 m, for a small surcharge also 1.50 m or special dimensions!) Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Delivery includes all bolts and nuts, excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Nsdpjfyadbofx Ah Uelb Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2021, būklė: naujas, The prices stated in this advertisement are the prices as of mid-2021. Due to the current international situation, the price of steel and transportation is increasing almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to request current prices and availability! We would be pleased to provide you with a current offer! Cantilever racking, double-sided, 4.16 m height, 1.20 m arms, 500 kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or with different bay spacings); this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized - IPE 160 / 80 - each with 2 x 3 adjustable arms 1.20 m, 500 kg load capacity per arm - with bracing approx. 1.30 m - Double-sided uprights approx. 4,160 mm high, hot-dip galvanized - Base and arm depth 1,200 mm each, with 3 height-adjustable arms per side - Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,250 kg per upright side - With longitudinal and diagonal bracing, center distance = 1,300 mm, standard is 1.30 m. Nlsdpfxoddmr No Ah Usb - Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a length of 1.50 m, a small surcharge applies to the stated price! - Special sizes (different bay spacings) are also available on request, but these also incur an additional charge and have a longer delivery time as they need to be custom-made! - If you do not specify a different bay spacing, we will supply the rack with a bay spacing of 1.30 m. In this case, the length for a single rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors.