Dvipusis, 5,18 m H, 1,20 m rankos, 500 kg

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Gamybos metai: 2021, būklė: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €2,899 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (or by varying the bay spacing); this example with 4 frames is just the most common racking solution! A galvanized cantilever racking system, consisting of: • 4 double-sided uprights approx. 3.50m high, hot-dip galvanized • IPE 160 / 80 • Each with 2x3 adjustable arms, 1.20 m, 500kg load capacity per arm • With braces approx. 1.30 m • Double-sided uprights approx. 3500mm high, hot-dip galvanized • Base and arm depth 1200 mm, each upright with 3 height-adjustable cantilever arms Dsdpeddmtcsfx Ag Iskt • Load capacity at load center 600mm: 500kg per arm / 2250kg per upright side • With longitudinal and diagonal bracing, bay spacing (e) = 1300mm, standard is 1.30m • Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m • From 1.50m bay length upwards, a small surcharge applies to the quoted price • Special sizes (other bay spacings) are available on request, but incur an additional cost and have a longer delivery time as they must be custom manufactured • Unless otherwise specified, the racking will be supplied with a bay spacing of 1.30m • With 4 upright frames (3 bays), the total length is approx. 4m • Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Discharge auger system available in any length, diameter, etc., tailored to your requirements and needs; naturally also available as separate units. Djdpfx Agst Iwt Ue Iokt Questions or inquiries? Please provide your full name, company name, and telephone number.

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 750kg per arm – new unit: Price ex location including loading! 1 rack unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with stoppers for this rack: €40 Djdpfx Agjddmp Ae Iskt Transport cost within Germany (excluding islands): €430 (net)! Of course, by omitting or purchasing additional uprights, you can assemble longer or shorter rack units (also by varying the bay distances); this example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth: 1,200 mm, each with 3 height-adjustable rack arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per load level: 4 x 750 kg = 3,000 kg, arms made of IPE 100, Including longitudinal and diagonal bracing, bay width = 1,300 mm (standard is 1.30 m – if you do not specify otherwise, we will deliver the rack at a bay width of 1.30 m. Other bay widths are possible, e.g. 1 m, 1.25 m, for a small surcharge also 1.50 m or special dimensions!) Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Delivery includes all bolts and nuts, excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, 1 racking unit with 4 uprights: €2,120 (net, ex VAT)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport price within Germany (excluding islands): €490 (net, ex VAT)! Of course, you can also create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the upright spacings); the example given with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Single-sided rack uprights, approx. 3,500 mm high, hot-dip galvanized Dkododdmqnepfx Ag Iet Base and arm depth: 1,200 mm with 3 height-adjustable arms each Load capacity at load center 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg total load With longitudinal and diagonal bracing, spacing = 1,300 mm (standard is 1.30 m). Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50 m upwards, a small surcharge will apply to the listed price. Special dimensions (other upright spacings) are also available upon request, incurring additional costs and longer delivery times as they are custom-fabricated. If you do not specify a different upright spacing, we will deliver the rack with a spacing of 1.30 m. For this configuration, a single rack row with 4 uprights (3 sections) is approximately 4m long. Supplied with all bolts and nuts (shipped within Germany via parcel service directly from Würth), floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available – please contact us!

Būklė: labai geros būklės (naudotas), Hochgeschwindigkeits-Hobelzuführung bestehend aus einem freistehenden Flachmagazin vor einem Hochgeschwindigkeits-Hobel. Das Einlaufmagazin wird von Hydraulikmotoren angetrieben, die von einer 5,5-kW-Hydraulikaggregat gespeist werden (max. 140 m/min). Ein Puffer aus Rohmaterial wird flach nebeneinander auf dem Kettenquerförderer ausgerichtet. Der Kettenförderer transportiert die Teile quer zum Anschlag. Das Teil am Anschlag wird durch eine Lichtschranke detektiert, woraufhin die erste Rolle angehoben wird, um den Eintritt zu ermöglichen. Die Transportrolle schiebt anschließend das Werkstück unter die Einzugswalzen des Vierseiters/Hobels. Die erste Einzugswalze des Hobels muss als Freilaufrolle ausgeführt sein, um den Betrieb der EM814 zu ermöglichen. Dkodpewgbxzofx Ag Iet

Gamybos metai: 2021, būklė: naujas, Cantilever racking, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW – : Price ex stock including loading! 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (mainland only): €550 (net)! Of course, you can also construct longer or shorter racking units by omitting or purchasing additional uprights (or by using different bay distances). The example with 4 uprights is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided racking uprights, approx. 5.18m high, hot-dip galvanized - IPE 180 / 100 - Each upright with 2 x 3 adjustable arms, 1.20m long, 860kg load capacity per arm - Includes bracing, approx. 1.30m spacing - Uprights double-sided, approx. 5180mm high, hot-dip galvanized - Foot and arm depth 1200mm with 3 height-adjustable arms per side - Load capacity with 600mm load center: 860kg per arm / 2,600kg per upright side - With horizontal and diagonal bracing, bay distance = 1,300mm (standard is 1.30m) Dkedpfx Asddmqyog Ijt - Other standard bay distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m upwards, a small surcharge applies to the listed price! - Special dimensions (different bay distances) are available on request, but are also subject to a surcharge and have a longer delivery time as they must be made to order! - If you do not specify a different bay distance, the racking will be supplied with a 1.30m bay distance. - With 4 uprights (3 bays), the total row length is approx. 4m. - Supplied with all bolts and nuts (shipping within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar racking system!

Gamybos metai: 2021, būklė: naujas, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New item: Price ex-works including loading! 1 rack unit with 4 uprights: €2,300 (net)! Dkodpfx Ageddmp Ue Iot Shipping cost within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter rack units by removing or purchasing additional frames (or by adjusting the frame spacing); this example with 4 frames is just the most common configuration! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms Load capacity with load center at 600 mm: 750 kg per arm / 2250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, e = 1300 mm. Standard is 1.30m – if you do not specify otherwise, the racking will be supplied with a 1.30m frame spacing. Other spacings available, e.g. 1.0m, 1.25m, or for a small extra charge, 1.50m or custom dimensions! Standard delivery length for a rack row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, veikimo valandos: 251 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 4 490 mm, laisvas kėlimas: 1 550 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 900 mm, šakių ilgis: 2 400 mm, tuščias svoris: 16 850 kg, bendras ilgis: 2 640 mm, pavaros tipas: Elektro, statybos plotis: 2 140 mm, Electric 4-wheel forklift Load center: 900 mm Mast type: Triplex Condition: As new Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 80V Battery year: 2020 Sideshift, fork positioner, 3rd valve, 4th valve, heater, road equipment (STVZO compliant), full cabin, full free lift, CE certificate, Dkjdsxxdy Njpfx Ag Iet

Gamybos metai: 2017, būklė: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! Dkodpfx Aeddmtqog Ist 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright fitted with 2 x 3 height-adjustable arms, 1.20m long, 750kg load capacity per arm - Including bracing approx. 1.30m - Upright height approx. 3500mm, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity with centre of gravity at 600mm: 750kg per arm / 2,250kg per upright - Supplied with longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! - For bay widths from 1.50m, a small extra charge applies in addition to the stated price! - Special dimensions (other upright spacings) are available upon request, subject to an extra charge and longer delivery time as these are custom-made! - If you do not specify a different upright spacing, the racking will be supplied with a bay width of 1.30m. - In this case, the total length for one rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 500kg per arm – New: Price ex location including loading! 1 rack unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Naturally, by omitting or purchasing additional frames, you can build longer or shorter rack units (or by varying the axis spacing). This example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - Single-sided upright approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1200 mm each with 3 height-adjustable arms per upright - Load capacity at 600mm load center: 500 kg per arm / 2250 kg per upright - With 4 uprights per storage level: 4 x 500 kg = 2,000 kg, arms IPE 80 - Includes longitudinal and diagonal bracing, center spacing = 1300 mm, standard is 1.30m Other standard center spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! Dkjdeddmpvjpfx Ag Ijt For lengths from 1.50m an additional surcharge applies to the stated price! Special dimensions (other center spacings) are also available upon request, but carry a surcharge and longer delivery times since they are custom manufactured! If you do not specify a different center spacing, we will supply the rack with a 1.30m center spacing. In this case, a rack row with 4 uprights (3 bays) is approx. 4m long. Delivered with all screws and nuts (shipment within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm length, arm types, etc.) available! Please contact us!

Būklė: geras (naudotas), Gamybos metai: 2000, Weinig High Mech E6 įvorius + A5 išvorius + krautuvas 1. Weinig pakuotės įvorių ritininis konvejeris. 2. Weinig pakuotės pakreipėjas. 3. Weinig plokščios grandinės skersinio padavimo konvejeris su lentų padavimo įrenginiu. 4. Weinig brokuotų ruošinių rūšiavimo mazgas su ritinėlių trasomis. 5. Weinig EM814 obliavimo staklių įvorius su plokščios grandinės padavėju. 6. Weinig išvoriaus 3 m juostinis pagreitintojas-konvejeris. 7. Ritininis konvejeris su skersinio padavimo grandininėmis stūmiklėmis. 8. Weinig skersinio padavimo buferinis juostinis konvejeris. 9. Weinig plokščios grandinės krautuvas su žirkliniu keltuvu ir ritininiu konvejeriu. 10. Weinig pakuotės išvoriaus ritininiai konvejeriai. Pagal poreikį galima pasiūlyti papildomą Weinig surišimo (pakavimo) sistemą. Dedpfx Aowgbw Rjg Ijkt

Gamybos metai: 2021, būklė: naujas, The prices stated in this advertisement are the prices as of mid-2021. Due to the current international situation, the price of steel and transportation is increasing almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to request current prices and availability! We would be pleased to provide you with a current offer! Cantilever racking, double-sided, 4.16 m height, 1.20 m arms, 500 kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or with different bay spacings); this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized - IPE 160 / 80 - each with 2 x 3 adjustable arms 1.20 m, 500 kg load capacity per arm - with bracing approx. 1.30 m - Double-sided uprights approx. 4,160 mm high, hot-dip galvanized - Base and arm depth 1,200 mm each, with 3 height-adjustable arms per side - Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,250 kg per upright side Dedjddmr Nspfx Ag Ijkt - With longitudinal and diagonal bracing, center distance = 1,300 mm, standard is 1.30 m. - Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a length of 1.50 m, a small surcharge applies to the stated price! - Special sizes (different bay spacings) are also available on request, but these also incur an additional charge and have a longer delivery time as they need to be custom-made! - If you do not specify a different bay spacing, we will supply the rack with a bay spacing of 1.30 m. In this case, the length for a single rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors.