Double-sided, 5.18m H, 1.20m arms, 860kg

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Gamybos metai: 2021, būklė: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €2,899 (net)! Cjdpfx Agjddmtce Dsri Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (or by varying the bay spacing); this example with 4 frames is just the most common racking solution! A galvanized cantilever racking system, consisting of: • 4 double-sided uprights approx. 3.50m high, hot-dip galvanized • IPE 160 / 80 • Each with 2x3 adjustable arms, 1.20 m, 500kg load capacity per arm • With braces approx. 1.30 m • Double-sided uprights approx. 3500mm high, hot-dip galvanized • Base and arm depth 1200 mm, each upright with 3 height-adjustable cantilever arms • Load capacity at load center 600mm: 500kg per arm / 2250kg per upright side • With longitudinal and diagonal bracing, bay spacing (e) = 1300mm, standard is 1.30m • Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m • From 1.50m bay length upwards, a small surcharge applies to the quoted price • Special sizes (other bay spacings) are available on request, but incur an additional cost and have a longer delivery time as they must be custom manufactured • Unless otherwise specified, the racking will be supplied with a bay spacing of 1.30m • With 4 upright frames (3 bays), the total length is approx. 4m • Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, spalva: juodas, bendras svoris: 1 600 kg, tuščias svoris: 1 600 kg, krovinių skyriaus plotis: 2 400 mm, krovimo vietos ilgis: 6 000 mm, krovos erdvės aukštis: 2 500 mm, mašinos/transporto priemonės numeris: Cafe Container Model Imbiss, Maisto prekybos priekabos | Prekybos priekabos | Kavinės priekabos | Biuro priekabos | Modelis „IMBISS FOREST“ | 240 cm x 600 cm | Aukštos kokybės ir universalus sprendimas Pas mus sandėlyje galite apžiūrėti ir iš karto atsiimti prieinamus produktus. Mūsų biuro ir gyvenamosios priekabos yra puikus sprendimas įvairioms paskirtims. Jos pasižymi puikia kokybe, dideliu lankstumu ir greitu pristatymu. Dkebtyew Iwmcjqfyxor Codjw Iwmispfx Ag Djri Techniniai duomenys: Matmenys: • Ilgis: 240 cm • Plotis: 600 cm • Aukštis: 250 cm • Svoris: 1350 kg Izoliacija: • Medžio imitacijos panelės • Sienos/lubos: 5 cm PUR (poliuretanas) • Ypač tvirtas ir specialus dugno rėmas • 2 mm storio cinkuotas plienas • Akmens vatos izoliacija tarp stiklų • Pasirinktinai: galima įdiegti 10 cm storio izoliaciją iš PUR, PIR arba akmens vatos • Dugnas: 16 mm storio pluošto cemento plokštė • PVC danga Įranga: • 1 patalpa • 3 liukai • 1 durys Spalvos: • Medžio imitacijos panelės • RAL7016 Aukštos kokybės apdirbimas, užtikrinantis ilgalaikį naudojimą Sandėlio atsargos ir pristatymas: • Sandėlyje: siunčiame tą pačią dieną • Nėra sandėlyje: gamybos laikas priklauso nuo modelio ir trunka nuo 2 iki 4 savaičių • Pasaulinis pristatymas: siūlome profesionalų pristatymą į visas šalis, kad užtikrintume greitą ir patikimą pristatymą. • Individualūs matmenys: produktai gali būti gaminami pagal kliento specifinius reikalavimus. Prekybos salono adresas: Am Schafhaus 28, 53557 Bad Hönningen, Vokietija Jei jums reikia daugiau informacijos arba norite, kad produktą pritaikytume pagal jūsų poreikius, kreipkitės!

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 750kg per arm – new unit: Price ex location including loading! 1 rack unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with stoppers for this rack: €40 Transport cost within Germany (excluding islands): €430 (net)! Of course, by omitting or purchasing additional uprights, you can assemble longer or shorter rack units (also by varying the bay distances); this example with 4 uprights is simply the most common rack solution! Crjdpfx Aoddmp Ajg Dei A cantilever racking system, hot-dip galvanized, consisting of: Single-sided uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth: 1,200 mm, each with 3 height-adjustable rack arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per load level: 4 x 750 kg = 3,000 kg, arms made of IPE 100, Including longitudinal and diagonal bracing, bay width = 1,300 mm (standard is 1.30 m – if you do not specify otherwise, we will deliver the rack at a bay width of 1.30 m. Other bay widths are possible, e.g. 1 m, 1.25 m, for a small surcharge also 1.50 m or special dimensions!) Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Delivery includes all bolts and nuts, excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, 1 racking unit with 4 uprights: €2,120 (net, ex VAT)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport price within Germany (excluding islands): €490 (net, ex VAT)! Of course, you can also create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the upright spacings); the example given with 4 uprights is simply the most common racking solution! Crsdpfx Agjddmqns Dsi Cantilever racking system, hot-dip galvanized, consisting of: Single-sided rack uprights, approx. 3,500 mm high, hot-dip galvanized Base and arm depth: 1,200 mm with 3 height-adjustable arms each Load capacity at load center 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg total load With longitudinal and diagonal bracing, spacing = 1,300 mm (standard is 1.30 m). Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50 m upwards, a small surcharge will apply to the listed price. Special dimensions (other upright spacings) are also available upon request, incurring additional costs and longer delivery times as they are custom-fabricated. If you do not specify a different upright spacing, we will deliver the rack with a spacing of 1.30 m. For this configuration, a single rack row with 4 uprights (3 sections) is approximately 4m long. Supplied with all bolts and nuts (shipped within Germany via parcel service directly from Würth), floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available – please contact us!

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 014017, Gamybos metai: 2021, veikimo valandos: 758 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 4 400 mm, laisvas kėlimas: 1 500 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 850 mm, šakių ilgis: 2 400 mm, pavaros tipas: Diesel, Dyzelinis krautuvas Važiuoklės numeris: 014017 Krovimo centras: 900 Stiebo tipas: Trikryptis (Triplex) Techninė būklė: gera Priekinės padangos tipas: superelastinės Galinės padangos tipas: superelastinės Cjdpfxsxybb Hs Ag Dsri Aprašymas: Raskite savo šakinį krautuvą STA-TECH! Nesvarbu, ar tai rankinis vežimėlis, elektrinis, dyzelinis ar dujinis krautuvas – siūlome nebrangius, paruoštus eksploatacijai modelius ir naujus krautuvus. STA-TECH yra Jūsų partneris: ● Šakinių krautuvų ir sandėliavimo technikos pirkimas bei nuoma ● Naudotos technikos ir logistikos pirkimas ● Gamintojo nepriklausomas aptarnavimas: remontas, techninė priežiūra, patikrinimai Šoninis poslinkis, šakių padėties keitimo įtaisas, 3-iasis vožtuvas, 4-asis vožtuvas, galiniai darbo žibintai, priekiniai darbo žibintai, šildymas, pilna kabina,

Gamybos metai: 2021, būklė: naujas, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New item: Price ex-works including loading! 1 rack unit with 4 uprights: €2,300 (net)! Shipping cost within Germany (excluding islands): €550 (net)! Cedoddmp Uopfx Ag Djri Of course, you can create longer or shorter rack units by removing or purchasing additional frames (or by adjusting the frame spacing); this example with 4 frames is just the most common configuration! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms Load capacity with load center at 600 mm: 750 kg per arm / 2250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, e = 1300 mm. Standard is 1.30m – if you do not specify otherwise, the racking will be supplied with a 1.30m frame spacing. Other spacings available, e.g. 1.0m, 1.25m, or for a small extra charge, 1.50m or custom dimensions! Standard delivery length for a rack row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2017, būklė: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 Crodpfx Aoddmtqsg Dei - Each upright fitted with 2 x 3 height-adjustable arms, 1.20m long, 750kg load capacity per arm - Including bracing approx. 1.30m - Upright height approx. 3500mm, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity with centre of gravity at 600mm: 750kg per arm / 2,250kg per upright - Supplied with longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! - For bay widths from 1.50m, a small extra charge applies in addition to the stated price! - Special dimensions (other upright spacings) are available upon request, subject to an extra charge and longer delivery time as these are custom-made! - If you do not specify a different upright spacing, the racking will be supplied with a bay width of 1.30m. - In this case, the total length for one rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame heights, arm lengths, arm types, etc.) available! Please contact us!

Būklė: naujas, Gamybos metai: 2020, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 900kg per arm – New product: Price ex works including loading! 1 racking unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! Crodsfivg Sepfx Ag Doi A cantilever racking system, hot-dip galvanized, consisting of: Single-sided upright approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity at load center 600 mm: 900 kg per arm / 4,000 kg per upright With 4 uprights per arm level: 4 x 900 kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE100 With longitudinal and diagonal braces e = 1,300 mm, standard is 1.30m. Other standard lengths available from stock: 1.00m / 1.25m / 1.50m / 1.70m / 1.90m! For lengths from 1.50m, a small surcharge applies to the price mentioned above! Custom dimensions (different center distances) are also available on request, but will incur an additional charge and have a longer delivery time as they are made to order! If you do not specify a different center distance, the rack will be delivered with a 1.30m center distance. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipment within Germany via parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, types of arms, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 500kg per arm – New: Price ex location including loading! 1 rack unit with 4 uprights: €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Naturally, by omitting or purchasing additional frames, you can build longer or shorter rack units (or by varying the axis spacing). This example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - Single-sided upright approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1200 mm each with 3 height-adjustable arms per upright - Load capacity at 600mm load center: 500 kg per arm / 2250 kg per upright - With 4 uprights per storage level: 4 x 500 kg = 2,000 kg, arms IPE 80 - Includes longitudinal and diagonal bracing, center spacing = 1300 mm, standard is 1.30m Other standard center spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! For lengths from 1.50m an additional surcharge applies to the stated price! Special dimensions (other center spacings) are also available upon request, but carry a surcharge and longer delivery times since they are custom manufactured! If you do not specify a different center spacing, we will supply the rack with a 1.30m center spacing. Crededdmpvspfx Ag Dji In this case, a rack row with 4 uprights (3 bays) is approx. 4m long. Delivered with all screws and nuts (shipment within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm length, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW – : Price ex stock incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Shipping within Germany (excluding islands): €550 (net)! Of course, you can build longer or shorter racking units by omitting or purchasing additional frames (or by adjusting the bay width), the example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms of 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity at load center of 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, bay width = 1,300mm. Standard is 1.30m. Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! Codpfx Ageddmq Ts Dsri For bay widths from 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay widths) are also available on request, subject to surcharge and longer delivery times as these are made to order! If you do not specify a different bay width, we will supply the rack with a bay width of 1.30m. In this case, the length of one row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, types of arms, etc.) available on request! Please contact us! Photos show a similar rack!

Būklė: naujas, Gamybos metai: 2025, The PROFESSIONAL machine with the best international price-performance ratio! Ergonomic operation with the tool edge always in view! Direct from the renowned Swiss manufacturer for precision grinding machines: BERGER technologie from THUN/Gwatt BE. The original from BERGER technologie, recognized for over 40 years for its extremely robust and highly durable DRILL GRINDING MACHINES – MADE IN SWITZERLAND! Over 40 years of experience in tool grinding speak for themselves… Sharpening woodworking tools PROFESSIONAL chisel and planer blade grinding machine WOOD-TOOL-GRINDER WTG-1 – “Swiss Quality” For precise and efficient work, a perfectly ground, razor-sharp tool edge is essential. With our grinding machine, you can sharpen your tools – chisels, planer blades, mortise chisels, carving gouges – quickly, easily, precisely, and cost-effectively… Crjdpfxeb Dt Ixs Ag Doi Currently the most affordable PROFESSIONAL wood tool grinder on the market! Manufactured in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER “WTG-1” used? • Wherever traditional woodworking is performed. • For example, in carpentry workshops, joineries, • Timber construction companies, schools, vocational schools, • Training centers/apprenticeship workshops... You benefit in several ways! When you resharpen a chisel or hand planer blade by hand or using an “older machine”, even skilled craftsmen need 5 minutes or more per blade, often with unsatisfactory results! With the WTG-1, you only need about 30 seconds per tool. This allows you to quickly sharpen an entire set of tools—even without special grinding skills or years of experience. The machine pays for itself in a short time. More importantly, you can reduce the recurring high variable costs for tools and sharpening work to a minimum. Once you own a WTG machine, you work exclusively with perfectly sharpened tools, which, among other things, has a positive impact on both quality and work speed. Stay ahead with the times… stay ahead with BERGER technologie GmbH. Your direct contact: Marc Brönnimann / Head of Assembly and Sales, BST

Gamybos metai: 2021, būklė: naujas, The prices stated in this advertisement are the prices as of mid-2021. Due to the current international situation, the price of steel and transportation is increasing almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to request current prices and availability! We would be pleased to provide you with a current offer! Cantilever racking, double-sided, 4.16 m height, 1.20 m arms, 500 kg per arm – NEW – : Price ex works including loading! Cjdpfxsddmr Nj Ag Dori 1 rack unit with 4 uprights €2,395 (net)! Transport price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or with different bay spacings); this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized - IPE 160 / 80 - each with 2 x 3 adjustable arms 1.20 m, 500 kg load capacity per arm - with bracing approx. 1.30 m - Double-sided uprights approx. 4,160 mm high, hot-dip galvanized - Base and arm depth 1,200 mm each, with 3 height-adjustable arms per side - Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,250 kg per upright side - With longitudinal and diagonal bracing, center distance = 1,300 mm, standard is 1.30 m. - Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a length of 1.50 m, a small surcharge applies to the stated price! - Special sizes (different bay spacings) are also available on request, but these also incur an additional charge and have a longer delivery time as they need to be custom-made! - If you do not specify a different bay spacing, we will supply the rack with a bay spacing of 1.30 m. In this case, the length for a single rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors.