Medienos juostinis pjūklas 4 kW

Hema Arbeitstisch schwenkbar

Gamybos metai: 1961, būklė: naudotas, Wood band saw, band saw machine, band saw, vertical band saw - Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw - Type: unfortunately without type designation - Drive power: 4 kW - Max. cutting width: 780 mm - Max. cutting height: 480 mm Nodpfomzkh Iex Aa Islh - Saw blade (band) length: 5600 mm - Work table: tiltable - Dimensions: 1420 x 920 x H 2400 mm - Total weight: 800 kg

Gamybos metai: 1997, būklė: labai geros būklės (naudotas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Nljdpfx Aekfp D Tja Ish - Round 90°/45° right, left / 30° right: 130/130/105 mm - Square 90°/45° right, left / 30° right: 120x120/100x100/90x90 mm - Rectangular 90°/45° right, left / 30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical details, please refer to the PDF document. Technical data and dimensions: subject to errors and change without notice.

Būklė: naudotas, Wood band saw, band saw machine, band saw, vertical band saw - Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw - Model: unfortunately without model designation - Drive: 4 kW - Cutting width: max. 770 mm - Cutting height: max. 400 mm Nljdpfx Aekia T Uja Ijh - Saw blade: length 5330 mm - Work table: tiltable - Dimensions: 1470/935/H2390 mm - Total weight: 743 kg

Būklė: geras (naudotas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Drive: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her with 3 rollers - Useful spindle length: 100 mm - Spindle diameter: Ø 30 mm - Max. cutter diameter: Ø 220 mm - Dimensions: 1540/1100/H1520 mm - Weight: 962 kg Nlodpfx Ajh Nvyzja Ioh

Būklė: geras (naudotas), Spindle moulder, table milling machine - Spindle moulder: with fixed spindle - Speeds: rpm Nodecl Svvspfx Aa Islh - Motor power: kW - Dimensions: 1000/1870/H1040 mm - Weight: 560 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, 4 spindle speeds: 3000/6000/4500/9000 rpm. Right/left rotation Spindle lock via foot pedal Milling fence with fine adjustment Spindle diameter: 30 mm Extraction ports above and below, each 120 mm Spindle spanner Nljdpoittnzjfx Aa Ijh Open-ended spanner 41 mm Cable and plug 16 amp.

Gamybos metai: 2023, būklė: naujas, Katilo talpa: 270 l Tūrio srautas: 680 l/min Nsdpfx Aaohmi Nqs Ijlh Variklio galia: 5,5 kW

Būklė: naudotas, Gamybos metai: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table area: 750 x 800 mm Table tilt: 15 degrees Nsdpfeiqp Erex Aa Islh Total power requirement: 4.0 kW Machine weight approx. 1750 kg Space requirement approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle - Mitre adjustment via lockable indexing every 15° - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band breakage monitoring system - Smooth-running saw carriage guided by preloaded linear ball guides - Additional table 450 x 450 mm - Machine lamp

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Njdpfxsfyadbj Aa Ielh Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Būklė: naujas, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Cutting length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Outrigger table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor input S6 40%: 7.5 kW (10.0 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight approx.: 850 kg Scope of Delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Length stop flaps • Outrigger table with roller • Push stick • Independently driven scoring unit • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double roller carriage with central and end position lock for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Outrigger table with roller for easier handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Supplied as standard with separately driven scoring unit (motor power 0.75 kW) • Robust saw unit with double-sided pivot elements made of cast iron Nsdpfod N S T Dsx Aa Ijlh • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the outrigger table, infinitely adjustable from 90° to 45°