Pjaustymo ir įkandimo staklės

Euromac MTX Flex 1250

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: 3018-04, Country of Manufacture: Switzerland Voltage: 380/50/3 Net Weight: 3100 kg Overall Dimensions: 230x155x170 cm Installed Power: 13 kVA Customs Code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre Distance: 650 mm Grinding Capacity SpW+bs -80 Stroke: 700 LONGITUDINAL SLIDE Max. Travel: SpW+50 mm Minimum Automatic Feed: 1.5 mm Speed: 50-5,500 mm/min Reversal Dwell Time: 0-6 sec. Maximum Table Swivel: 12°/10°/8.5°/6° Pneumatic Table and Workhead Relief CROSS SLIDE Max. Travel: 300 mm Rapid Traverse: 60 mm Dsdpfjw T Sd Tox Af Teun Plunge Depth (diameter): 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per Pulse: 0.001-0.05 mm WHEELHEAD Left Wheel, Outer Grinding: 400x80x127 mm Drive Power: 5.5 kW Peripheral Speed: 35 m/s Rotational Speed: 1670/2110 rpm Internal Grinding Device for Belt-driven Spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel Range: 0-90° Continuously Variable Speed: 30-1000 rpm Internal Taper: Morse 5 Clamping Collets: W-25 Drive Power: 0.55 kW Max. Workpiece Weight (between centers): 130 kg Load for Non-Supported Grinding: 100 Nm TAILSTOCK Internal Taper: Morse 3 Quill Stroke: 35 mm Fine Adjustment for Cylindricity Correction: ± 40 µm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Generatrix Straightness over 630 mm: 0.003 mm Roundness in Unsupported Grinding: 0.0003 mm CONNECTION VALUES Max. Power Consumption: 13 kVA Permissible Voltage Fluctuation: -15% +10% Permissible Frequency Variation: ± 3% Required Compressed Air Pressure: 5 bar Except for error or omission, the above technical data are provided without obligation.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 55 806 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 500 kN, varžto skersmuo: 45 mm, bendras ilgis: 4 700 mm, bendras plotis: 1 700 mm, bendras aukštis: 2 000 mm, bendras svoris: 4 850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling system of the type Multi Select, axis X/Y/Z 600/600/1400 mm. The machine is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1500 kN Tie-bar distance: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours (pump): 55,806 h Injection cylinder: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1580 bar Dimensions: approx. 4700 x 1700 x 2000 mm Weight: 4850 kg Transport and loading can be organized throughout Europe for an additional charge, if desired. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website. Djdpfx Afew E Itie Tjun

Sąlyga: naudotas, Gamybos metai: 2006, Technical Details: X-axis travel: 800 mm y-axis travel: 800 mm z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 CNC control: SIEMENS 840D shopmill Tool magazine capacity: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, IKZ (internal coolant supply) 40 bar, Prepared for Renishaw MP 10 infrared measuring probe, probe not included, Mechanical tool breakage detection, MQL (minimum quantity lubrication), Through-spindle air blast, Electrical oil mist extraction, Electronic handwheel, TRANSMIT function, Precision package, BA 4, Duedpfx Afepumdco Ten Laminated safety glass (right door), Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including loading station, stacker crane, master computer and 10 pallets. Approx. 98,500 hours main switch ON Approx. 45,500 spindle hours

Sąlyga: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Dusdpfx Aewtgcxsf Ton Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fuse protection: 25 A Condition: used

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min TILTING AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400 x 400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Space requirement: 4,100 x 2,300 mm - Machine height: 2,720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h Djdpfx Ajuhbv Ssf Tsun EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Direct measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin wash - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe - Workpiece measuring probe: Renishaw OMP60

Sąlyga: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Duedpfx Ajvca Izjf Ten Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, Atstumas tarp centrų: 650 mm Dusdewu Tdfopfx Af Tsn Vidinis / išorinis diametras 2 ašių SONY skaitmeninis atvaizdavimas Aušinimo skysčio bakas

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 750 mm, Z ašies eigos atstumas: 610 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 24 m/min, ruošinio svoris (maks.): 1 500 kg, bendras aukštis: 24 920 mm, bendras ilgis: 43 670 mm, bendras plotis: 30 700 mm, stalo plotis: 700 mm, stalo ilgis: 1 600 mm, veleno greitis (min.): 40 aps./min, veleno greitis (maks.): 8 000 aps./min, ašies variklio galia: 11 W, veleno nosis: Iso 40, įrankio ilgis: 250 mm, įrankio skersmuo: 75 mm, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, NEW Vertical Machining Center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Included accessories: - Rotary table interface Dodpsrkn Iiefx Af Toun - External spindle air blast - Left-side auger chip conveyor - Automatic high-pressure coolant system through the spindle at 20 bar - Workpiece wash gun - Enclosure wash system - 390-liter coolant collection tank - Three-color stack light end-of-cycle alarm - Full auto shut-off

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 450 mm, pjovimo aukštis (maks.): 100 mm, pjovimo plotis (maks.): 245 mm, darbinio aukščio: 100 mm, įvesties srovės tipas: trifazis, – Year of manufacture: 2001 – Optimization – Cross-cutting – The machine is equipped with additional tables, allowing for a maximum cutting length of up to 6,500 mm (currently set to 3,400 mm) – 8 cutting lists TECHNICAL SPECIFICATIONS: – Maximum cutting length: 6,500 mm (currently 3,400 mm) – Minimum workpiece length: 300 mm – Maximum cutting height: 100 mm – Maximum cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Maximum feed speed: 120 m/min – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material clamping – Five ejectors – Intelligently controlled waste chute – Vario Speed system – Total machine length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg Dedpfx Afowtzrho Tsun

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 53 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 206432, spaudimo jėga: 2 000 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 570 mm, darbinio tūrio: 392 cm³, įpurškimo slėgis: 2 000 juosta, išstūmimo eiga: 225 mm, bendras svoris: 7 450 kg, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines built from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current information – Tax notice and advantage for used machinery: From 01.07.2025, used machines can also benefit from a special depreciation of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (LxWxH): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete 50 mm highly wear-resistant thermoplastic cylinder - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with two variable delivery pumps - GOLDEN EDITION anniversary model - Thermoplastic processing - 50 mm open nozzle - Extended 50 mm nozzle tip - Heating band for open nozzle - Heating band for extended nozzle tip - 570 central clamping plate configuration, ⌀ 125 mm - Two air-blast units with pressure regulator - Connection for air-blast unit 1 - Connection for separating unit - Core pull 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Interface for robot system (EUROMAP 67), 50-pin - Interface for ARBURG host computer - Socket distributor: 1 CEE, 1 Schuko additional - Serial printer interface USB - CompactFlash interface for data storage - Operator authorisation via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for colouring unit - Manual adjustment for free cooling circuits - Machine-specific cooling circuits controlled - Equipment package: advanced monitoring - Equipment package: extended movement - Equipment package: production control - Equipment package: optimisation / operator assistance - Equipment package: quality assurance - Equipment package: documentation Complete documentation available Injection unit: Screw diameter: 50 mm Injection weight: 359 g/PS Injection pressure: 2000 bar Injection volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie-bar clearance: 570 x 570 mm Mounting plates: 795 x 795 mm Tool installation height: 300 mm Max. plate distance: 950 mm Opening stroke: 650 mm Ejector stroke/force: 225 mm / 66 kN Dusdpfxow Tt R Ij Af Ten Clamping system: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany, and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Free loaded onto the buyer’s truck, or free house delivery for transport reimbursement, available ex stock Hannover, Germany A summary of our machines and company: - We only sell machines we have purchased from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers trading with third-party property - All machines come from successful companies that have given them proper maintenance and care - All machines offered can be viewed at our warehouse