Liejimo mašina, Golden + tvarkymas

Arburg 470 C 1500-400 219783

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. Ffsdpfx Astyyn Hob Sjt 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Sąlyga: naudotas, Gamybos metai: 2008, spaudimo jėga: 160 kN, darbinio tūrio: 251 cm³, įpurškimo slėgis: 2 500 juosta, bendras svoris: 8 200 kg, darbo valandos: 37 200 h, sraigtinio konvejerio skersmuo: 40 mm, Pristatymo sąlygos: FCA Pegnitz Ffodpfx Ajwd Udlsb Set Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, 1.0 pc used injection molding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Fjdpfx Aou Eu Tnsb Seft Year: 2007 Clamping force: 28 tons Tie bar distance: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Sąlyga: naudotas, Gamybos metai: 2001, spaudimo jėga: 60 kN, darbinio tūrio: 224 cm³, įpurškimo slėgis: 2 224 juosta, bendras svoris: 3 350 kg, darbo valandos: 60 790 h, sraigtinio konvejerio skersmuo: 18 mm, Min. mould installation height: 15 mm_Max. platen clearance: 575+ mm Payment terms: 100% before collection of the machine, strictly net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: - Clamping force: 60 t Opening stroke: 425 mm Ffodpfsh Tk Rvox Ab Sot Min. mould installation height: 350 mm Max. mould installation height: - Tie bar spacing (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centres (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner controllers: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating power: 3.6 kW Pump drive power: 11.0 kW Total connected load: Motor + heater Total weight: 3,350 kg Dimensions L x W x H: 4.0 x 1.5 x 2.1 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Table length: 4000 mm Table width: 1500 mm Torch heads: 1 Control: SIEMENS 840D Power: 6000 watts Speed: 10 m/min Machine weight: approx. 19 t Space requirements: approx. 9.5 x 7.3 x 3.1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 kW is a 5-axis laser machine. Description: - Max. sheet thickness: steel: 20 mm / stainless steel: 20 mm / aluminium: 15 mm - Enclosed machine cabin - TruFlow 6000 laser - ADC cutting head - Positioning laser diode - Overhead stationary, rotatable operator panel Fsdpfju N I Erjx Ab Sjft - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 44 600 h, Funkcionalumas: visiškai funkcionalus, 1,0 vnt naudota dviejų komponentų liejimo mašina su robotu Gamintojas: ARBURG Tipas: 570S2200-400/170e² Metai: 2010 Uždarymo jėga: 220 tonų Kolonų atstumas: 570 x 570 mm Montavimo aukštis min./maks.: 350 mm Atidarymo eiga: 1.000 mm Sraigtas DN 1: 35 mm Didž. įpurškimo tūris: 154 cm³ Liejinio svoris: 141 g/PS Sraigtas DN 2: 30 mm Ffjdpsu E E H Sjfx Ab Sst Įpurškimo tūris: 59 cm³ Liejinio svoris: 47 g/PS Valdymas: SELGOCIA Įranga: 3 x šerdžių trauktuvai Vertikali įpurškimo sekcija 6 ašių robotas, gamintojas: KUKA, tipas: KR 16 Wikut, metai: 2010 Konvejeris Apsauginė tvora

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 83 000 h, spaudimo jėga: 350 kN, varžto skersmuo: 25 mm, For sale is an injection moulding machine by Arburg, model 320S 350-60. Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request, at an additional cost. Fodpshhuq Ajfx Ab Sjft Price incl. VAT Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Sąlyga: naujas, Load capacity in kg: 500 kg overhang/reach: 4000 mm Height: 3425 mm (underside of jib) Total column height: 4215 mm Slewing range: 270 degrees Total weight approx. 550 kg Description: - Trolley power supply - Festoon cable system, cable sag approx. 800 mm - Operation from the floor using a pendant control includes: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-fall - Painted in RAL 5017 traffic blue - Load capacity 500 kg - Lifting height 3000 mm - Highest hook position 2965 mm - Design basis: FEM 9.901 - Mechanism group 2m / M5 - Hoisting, 2-speed (pole-switchable) 1 / 4 m/min - Lifting power 0.09 / 0.35 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection Fodpfxexak H Ej Ab Sjft The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as the current German accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Including: - Anchor rods L200 (set) size LS 200 - comprising 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for foundation fastening, including grouting accessories To align the slewing jib crane, a mounting gap must be provided between the column base and the building floor. After approx. 4 weeks of crane operation, this mounting gap is to be grouted by the customer. Illustration shows a similar crane system.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 17 000 h, spaudimo jėga: 220 kN, varžto skersmuo: 50 mm, Year: 2018 Control type: CC300 Operating hours: 17,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 220 T Fedpfx Abovtm Uis Ssft Opening stroke: 530 mm Tie bar spacing: 620 mm x 620 mm Platen dimensions: 900 mm x 900 mm Min./max. mould height: 250 / 600 mm Max. distance between platens: 1,220 mm Screw diameter: 50 mm Screw L/D ratio: 20D Volume: 432 cm³ Injection pressure: 2,002 bar Motor power: 29 kW Heating power: 15.3 kW Clamping unit weight: 11.3 T Length: 6.30 m Width: 1.80 m Height: 2.10 m Core pull: NO Robot interface: YES Bi-metallic screw: YES

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5m straightening beam. It is capable of processing beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with Stierli’s proven stroke fine adjustment control, making it very easy to use and enabling fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyors, NC control, laser measurement, etc. Fodpfx Asufhzvob Ssft (Note: The photo does not show the original machine.)