Liejimo mašina
Arburg 570C 2000-800

Name: Arburg 570C 2000-800
Brand: Arburg
Availability: InStock

Gamybos metai

2015

Būklė

Naudotas (visiškai funkcionalus)

Vieta

Hannover

Duomenys apie mašiną

Mašinos pavadinimas:: Liejimo mašina

Gamintojas:: Arburg

modelis:: 570C 2000-800

Mašinos numeris:: 231000

Gamybos metai:: 2015

Būklė:: labai geros būklės (naudotas)

Funkcionalumas:: visiškai funkcionalus

Darbo valandos:: 29 500 h

Kaina ir vieta

Vieta:: 30 Hannover, Deutschland

Skambinti

Techniniai duomenys

Spaudimo jėga:: 2 000 kN

Varžto skersmuo:: 55 mm

Tarpas tarp stulpų:: 570 mm

Darbinio tūrio:: 474 cm³

Įpurškimo slėgis:: 2 000 juosta

Injekcijos svoris:: 434 g

Išstūmimo eiga:: 225 mm

Bendras svoris:: 7 450 kg

Įranga:: dokumentacija / vadovas

Pasiūlymo informacija

Skelbimo ID:: A19873690

Atnaujinimas:: paskutinį kartą atnaujinta 02.06.2026

aprašymas

Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine:

Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards.
We have been wholesalers of used injection moulding machines for over 25 years.

Current note – Tax Notice and Benefit for Used Machines

From 01.07.2025, used machines can be considered for a special tax depreciation of 30% annually.

Manufacturer: Arburg
Model: 570C 2000-800 GE
Serial number: To be provided
Year of manufacture: 2015
Operating hours: approx. 29,500 h
Machine number: 231000
Control system: Selogica

Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m
Weight: 7,450 kg
Functionality: fully operational
Condition: very well maintained – German origin

Extras:
- Complete thermoplastic cylinder, 55 mm, high-wear resistant
- Thermoplastic processing
- Open nozzle, 55 mm
- Clamping platen set: 570 central, Ø 125 mm
- 2x core pullers
- Complete documentation

Injection Unit
- Screw diameter: 55 mm
- Shot weight: 434 g/PS
- Injection pressure: 1,650 bar
- Shot volume: 474 cc

Clamping Unit
- Clamping force: 200 t / 2,000 kN
- Tie bar spacing: 570 x 570 mm
- Clamping plates: 795 x 795 mm
- Mold installation height: 300 mm
- Max. platen distance: 950 mm
Cedpfxsw Tt R Ie An Hjrc
- Opening stroke: 650 mm
- Ejector stroke/force: 225 mm / 66 kN
- Clamping unit: hydraulic

Motor power: 22 kW
Heating capacity: 19.9 kW / 8 heating zones
Total connected load: 45 kW

Visible peripheral devices are not included in the scope of delivery.

The machine is immediately available for inspection and has been tested at our warehouse in Hanover, Germany.

Warranty
Warranty until initial commissioning.

Loading/Shipping
Free loading onto buyer’s truck or free delivery to site upon reimbursement of freight costs – worldwide shipping available from our warehouse in Hanover, Germany.

About our offered machines and our company:
- We only sell machines from our own stock, purchased from ongoing production, available at our warehouse in Hanover
- All machines offered are checked and tested prior to dismantling
- We do NOT sell insolvency assets – we are NOT brokers trading third-party property
- All machines offered come from successful companies for whom regular servicing and maintenance are a given
- All machines offered are available for viewing in our warehouse

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Registruotas nuo: 2013

20 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 5121 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Arburg 570 C 2000-800 (2017) Arburg 570 C 2000-800

Trenčianske Stankovce

811 km

Arburg 570 C 2000-800 (2017)
Arburg570 C 2000-800

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Uždarymo jėga: 200 t Sraigto skersmuo: 50 mm Šūvio svoris: 359 g Atstumas tarp stulpelių V: 570 mm Atstumas tarp stulpelių H: 570 mm Crjdpsyktgqjfx An Hsc Šūvio tūris: 392 cm³ Įpurškimo slėgis: 2000 bar Euromap 67 1x šerdies ištraukimo įrenginys Tipas: Horizontalus Pavara: Hidraulinė

Peržiūrėti detales

Mažas skelbimas

Cutter cut expert ecocam 2 / Ploteris expert international gmbh cut expert ecocam 2

Bielefeld

1 063 km

Cutter cut expert ecocam 2 / Ploteris
expert international gmbhcut expert ecocam 2

74 400 €

VB plius PVM

Skambinti

Būklė: naudotas, Gamybos metai: 2026, veikimo valandos: 15 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 204065, Used CNC Cutter/Plotter Cutting area (X x Y): 2,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of leather, fabrics, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Features of the used machine: • 1 cutting gantry and 1 multifunctional tool head The machine is supplied with a driven rotary knife, electrically oscillating knife, and milling tool (including extraction/collection unit) • Multifunctional tool head capable of accommodating up to 2 interchangeable tools • High-performance vacuum blower for material fixation • Supplied as standard with grey conveyor belt table (conveyor). Teal exchange conveyor available (provides high contrast for dark materials) Additional tools can be retrofitted (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven rotary knife • UCT universal cutting knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle-cutting knife • Printer mark detection • Camera registration • Punch tool for notches or holes • Milling head with extraction unit User-friendly • Easy tool changes with "PLUG & CUT" • Intuitive user interface • Effortless blade changing • Vacuum zones can be activated at the push of a button Rapid ROI Codoif Ek Repfx An Hsrc • Low costs with high added value • Optimal material utilization via nest expert software modules (not included) • High speed • Consistent precision Technical data: • Fast cutting times due to high positioning speed, up to 90 m/min • Repeatability: +/- 0.25 mm • Single or multi-layer cutting capability • Suitable for both sheet and roll materials (can be expanded with appropriate unwinder) • Rapid amortization (Product image for illustration purposes) The machine is CE certified.

Peržiūrėti detales

Mažas skelbimas

Arburg 570 C 2000-800 Aukso Leidyba (2018) su mažai darbo valandų Arburg 570 C 2000-800

Trenčianske Stankovce

811 km

Arburg 570 C 2000-800 Aukso Leidyba (2018) su mažai darbo valandų
Arburg570 C 2000-800

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 000 kN, Įranga: dokumentacija / vadovas, Uždarymo jėga: 200 t Sraigto skersmuo: 55 mm Šūvio svoris: 434 g Atstumas tarp kolonų V: 570 mm Atstumas tarp kolonų H: 570 mm Šūvio tūris: 474 cm³ Plokščių matmenys: 795 x 795 mm Darbo valandos: 25.969 h Tipas: Horizontalus Pavaros tipas: Hidraulinis Įranga: Codox Ir Ngspfx An Horc 1x branduolio traukimo įrenginys Euromap 67

Peržiūrėti detales

Mažas skelbimas

Gręžimo ir frezavimo staklės Fehlmann Picomax 20

Reiden

1 411 km

Gręžimo ir frezavimo staklės
FehlmannPicomax 20

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Heidenhain digital readout Fehlmann cross table KS 322 D Working area: Quill travel Z-axis: 110 mm Travel of machine head: 450 mm Crsdpfx Aewkrp Een Hjc Table to spindle nose: 0 – 527 mm Quick-change system SF 32 Work spindle: 2.9 kW Continuously variable speed range: 50 - 6300 rpm Clamping surface: 320 x 670 mm Dimensions and Weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight: approx. 850 kg

Peržiūrėti detales

Mažas skelbimas

Automatinis padėklų išdavimo įrenginys, krautuvas UMP Technika PD-10

Ukmergė

55 km

Automatinis padėklų išdavimo įrenginys, krautuvas
UMP TechnikaPD-10

11 990 €

FCA Fiksuota kaina plius PVM

Skambinti

Gamybos metai: 2025, būklė: naujas, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200 mm) beladen, entfällt das manuelle Vorbereiten einzelner Paletten, wodurch Zeit gespart und die körperliche Belastung der Mitarbeiter reduziert wird. Stattdessen gibt das Gerät per Knopfdruck oder nach einem vordefinierten Algorithmus Paletten auf ein motorisiertes Rollenförderband frei, welches diese zur Weiterverarbeitung transportiert. Der PD-10 kann mit verschiedenen Palettierlösungen kombiniert werden. Crjdjhbg Uxepfx An Hoc Für bis zu 10 Europaletten geeignet Beladung per Gabelstapler Reduziert körperliche Belastung Steigert die Effizienz

Peržiūrėti detales

Mažas skelbimas

Cilindrinė šlifavimo mašina Studer S30-12

Zuchwil

1 437 km

Cilindrinė šlifavimo mašina
StuderS30-12

Skambinti

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW Credpfx Ansvca Izs Hoc No liability is accepted for the correctness, completeness or accuracy of the information provided.

Peržiūrėti detales

Mažas skelbimas

Įpurškimo liejimo mašina Arburg 320C 500-170

Hannover

979 km

Įpurškimo liejimo mašina
Arburg320C 500-170

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, veikimo valandos: 47 247 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 230999, spaudimo jėga: 500 kN, varžto skersmuo: 35 mm, darbinio tūrio: 115 cm³, injekcijos svoris: 105 g, Įranga: dokumentacija / vadovas, We are offering the following well-maintained, used injection moulding machine as part of our injection moulding machine trade: Of course, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesale dealer in injection moulding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 230999 Year of Manufacture: 2015 Operating Hours: 47,247 h Control System: Selogica Dimensions (L/W/H): 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Functionality: Fully operational Condition: Very well maintained Extras: - 1x core puller - Handling interface - Highly wear-resistant 35 mm thermoplastic screw/barrel - Complete documentation and software (on CF card), - German language, - First owner, German origin - Regular maintenance by manufacturer and previous owner Visible peripheral devices are not included in the offer unless explicitly specified. Injection Unit: - Screw diameter: 35 mm - Shot weight: 105 g/PS - Injection pressure: 1,470 bar - Shot volume: 115 ccm Crsdpfxjv U Tl Dj An Hsc Clamping Unit: - Clamping force: 50 t / 500 kN - Tie bar distance: 320 x 320 mm - Mounting plates: 446 x 446 mm - Mold height: 200 mm - Max. platen distance: 550 mm - Ejector stroke/force: 125 mm / 30 kN - Clamping unit: Hydraulic Drive Power: 11 kW Heating Power: 9.4 kW Total Power: 21 kW The machine is available immediately from our warehouse in Hannover, Germany and has been tested. ✔ Warranty Warranty up to initial commissioning. Loading/Shipping Free loading onto buyer’s lorry or free delivery within Germany against freight charge – worldwide shipping possible Immediately available ex-stock Hannover, Germany. For further information about our machines and company: - We sell only machines purchased from ongoing production at our Hannover warehouse. - All offered machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers trading third-party equipment. - All machines offered come from successful businesses for whom regular maintenance is standard. - All offered machines can be inspected under power at our warehouse.

Peržiūrėti detales

Mažas skelbimas

Vertikalus 5 ašių apdirbimo centras MIKRON UCP 600

Root

1 400 km

Vertikalus 5 ašių apdirbimo centras
MIKRONUCP 600

Skambinti

Mažas skelbimas

Lovos frezavimo staklės STYLE CNC Machines BT 4000 (XYZ:4000x1000x1000 mm)

Bunschoten-Spakenburg

1 259 km

Lovos frezavimo staklės
STYLE CNC MachinesBT 4000 (XYZ:4000x1000x1000 mm)

249 000 €

Fiksuota kaina plius PVM

Skambinti

Būklė: naujas, Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: STYLE CNC Machines, įrankių magazino lizdų skaičius: 24, variklių gamintojas: FANUC, Pristatymas pagal susitarimą Ref.: 24F048 Gamybos metai: 2025 Būklė: Parodų salės Specifikacijos: - X ašis: 4000 mm - Y ašis: 1000 mm - Z ašis: 1000 mm Crodpfx Answ Ty S Ss Hjc - Pagrindinis variklis 26 kW (S6) - 8000 aps./min - BT-40 - Automatinis įrankių keitiklis (24 pozicijos) - Nuotolinis aptarnavimas (IXON) + tinklo jungtis - Stipresnis aušinimo siurblys su purkštuvu - Atnaujinta iki naujausios STYLE programinės versijos

Peržiūrėti detales

Mažas skelbimas

Horizontalus apdirbimo centras Mori Seiki NH-5000 DCG/40

Calerno

1 500 km

Horizontalus apdirbimo centras
Mori SeikiNH-5000 DCG/40

Skambinti

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 730 mm, Y ašies eiga: 730 mm, Z ašies eigos atstumas: 850 mm, greitas poslinkis X ašimi: 50 000 m/min, greitas poslinkis Y ašis: 50 000 m/min, greitasis eiga Z ašyje: 50 000 m/min, nominali (akivaizdi) galia: 22 kVA, valdiklių gamintojas: MORI SEIKI, valdiklio modelis: MSX-711 IV, stalo apkrova: 500 kg, įrankių magazino lizdų skaičius: 60, įrankio ilgis: 500 mm, įrankio skersmuo: 140 mm, įrankio svoris: 12 g, Horizontal Machining Center MORI SEIKI NH-5000 DCG/40 The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to deliver outstanding precision, reliability, and consistent productivity—even in the most demanding machining operations. Key Features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X-axis: 730 mm Y-axis: 730 mm Z-axis: 850 mm Spindle center – pallet surface distance: 100 – 830 mm Spindle nose – pallet center distance: 100 – 950 mm Max workpiece dimensions: Ø800 x 1,000 mm Rotary Table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Maximum load per pallet: 500 kg Table continuous rotation: 360,000 positions Feed Rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool Changer: Tool taper: MAS BT-40 Cjdpfxjwxygzo An Hsrc Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Maximum tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Maximum tool length: 500 mm Maximum tool weight: 12 kg Equipment and Accessories: Chip conveyor Coolant collection tank with washing pumps + external tank with paper filter High-pressure coolant pump through spindle line Spindle head chilling unit and transformer Retractable tool presetter sensor Complete technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and high-volume production, the NH-5000 DCG/40 combines structural rigidity and advanced CNC technology, ensuring rapid, precise, and complex machining operations.

Peržiūrėti detales

Reklamuokite čia