Klimato kamera Temperatūra ir drėgmė

Espec PHP-J3 bis +100°C

Būklė: labai geros būklės (naudotas), Espec Type: PHP - J3 Bjdpfx Aajtzbzcehswi Technical Data: Air-cooled Temperature and humidity range: Room temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber Important information for your safety as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! Bwedpfx Aetr Dinjahei The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Bwsdohrdy Sopfx Aahoi Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 Important information for your peace of mind as a buyer: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Rate of temperature change (cooling): 7.5 K/min Rate of temperature change (heating): 7.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Fusing, to be provided on-site: 32 A slow-blow Bjdpfjhh H Hiox Aahjwi Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side port: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Test Cabinet / Climate Chamber We are offering a CTS climate chamber for sale. Air-cooled Test chamber volume: 200 liters Internal chamber dimensions: height 750 mm, width 650 mm, depth 400 mm External dimensions: height 1800 mm, width 920 mm, depth 1345 mm Temperature operating range Temperature range: -40°C to +180°C Cooling rate: 4 K/min Heating rate: 4 K/min Maximum heat input at +20°C: 3500 W Temperature stability (temporal): ≤± 0.3 K Bjdpfohwhzwsx Aahewi Climate operating range Temperature range: +10°C to +95°C Humidity range: +10% to +98% RH Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current: 9.4 A Rated power: 4.8 kW Weight: approx. 450 kg Refrigerant: R404A Model: CTS C-40/200 The following points are performed on the chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and information may be subject to change and error!) If you have further questions, feel free to contact us by phone.

Būklė: geras (naudotas), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Tests Specifications: Test Chamber Volume: approx. 1000 L Test Chamber Dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door Opening Dimensions (W x H): 1300 x 680 mm External Housing Dimensions (WxDxH): 2162 x 995 x 2080 mm Operating Temperature Range: 5°C above ambient up to +80°C High-load version for a maximum load capacity up to 350 kg Process Control: Beckhoff PLC, Color Touchscreen Display, 50 memory slots for test procedures, 50 memory slots for test segments, Ramps: humidity-temperature across the entire working range, Ethernet interface Electrical Connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, 3/4" tap connection, external thread for connection of an ion exchange cartridge Bwedpfet Igc Ssx Aahji Compressed Air: 7-8 bar Waste Water: Siphon / 30 mm ID hose nozzle Exhaust Air: pipe end OD 75 mm Operating modes: Salt spray (fog) Condensed water (CWC) Ambient air ventilation Hot air Controlled humidity

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 24 mėnesiai, New filling machine / filler suitable for dispensing liquids. Applications include: - Milk - Water - Alcohol - Disinfectant - And more This is a very robust machine that operates on compressed air and 220V, truly Plug and Play! Ideally suited for filling small batches. Even a very small compressor is sufficient to operate this machine; we can supply a compressor if required. For this, we recommend a minimum 12L version. The filler is equipped with a 1000ml cylinder, allowing for a maximum of 1000ml per stroke. By setting the machine to perform multiple strokes, larger volumes can also be dispensed easily—e.g. 2500ml by doing 2 x 1250ml. The smallest adjustable fill size is 100ml; any volume between 100 and 1000ml can be dispensed in one stroke. We also offer models fitted with cylinders up to 5000ml per stroke. The machine comes with a suction hose, enabling direct supply from a drum or IBC. It is equipped with a foot pedal and an auto mode. In auto mode, continuous filling is possible for fast processing of larger batches; with the foot pedal, operators can work at their own pace. Depending on the operator and volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20 kg and can easily be placed on a table. Entirely made from stainless steel, ensuring premium build quality. Bederivxcepfx Aahowi For questions, please send us an email; we are happy to advise you on this or other machines. We also offer a labelling machine that pairs excellently with this filler. We strive to answer your query within 24 hours. Of course, you can also reach us by phone. We are available on working days between 09:00 and 17:00.

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), Throughput capacity: 39,600/h, additional accessories available. Bsdjmdry Hepfx Aahowi

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), Weiss Model: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor loading: Designed for a maximum payload of 250 kg Key data for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating: 25 K/min Cooling: 25 K/min (down to -45°C) Heat compensation: max. 8000 W Key data for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98 % RH (relative humidity) Climate performance data (excerpt) Humidity range: 10 to 98 % RH Humidity deviation (over time): At the center of usable space, in steady state, depending on the set point: ±1 to ±3 % RH Temperature deviation (over time): At the center of usable space, in steady state, depending on temperature: ±0.1 to ±0.3 K Temperature homogeneity (spatial): Referring to the set value (for ranges > 20 % RH): ±0.5 to ±1 K Bwodpfsw R Rt Isx Aahsi Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode Weight: approx. 2050 kg For your safety as a buyer, the following information: The following points are performed on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All details are without guarantee!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test chamber designation: WK 27'/50-150 External dimensions: Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control cabinet dimensions: Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal dimensions: Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor load: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 litres Specimen mass: 1,000 kg Cooling / Heating operation: -50°C to +150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (over time) Temperature stability: ± 0.1 to 0.5 K (over time) Climatic operation: 10 – 90°C Bjdpfevx Nfbex Aahowi Humidity: 10...98 % r.h. Temperature constancy: ± 0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7,000 kg Refrigerants: R23 and R404A Supplied with additional floor plates to increase load capacity Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors! All information is non-binding!) Should you have any further questions, we will be happy to answer them by phone.