Sanding machine

ECOLINE Q-SAND 6

Gamybos metai: 2022, būklė: naudotas, Number of sanding units: 6 pcs. Maximum sanding height: 120 mm Power: 12 kW Sanding machine ECOLINE QQSAND 6 - Year of manufacture: 2022 - Original price: EUR 89,000 Sanding of individual parts after the planing machine. Sanding of raw surfaces. Sanding of top and bottom surfaces. Equipment This sanding line is equipped with 6 sanding units: - Upper sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Upper sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Upper sanding brush, D 320 mm, L=250 mm, 1.1 kW - Lower sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Lower sanding disc, D 400 mm, 1.1 kW. Equipped with automatic exchange system - Lower sanding brush, D 320 mm, L=250 mm, 1.1 kW System Features - All tools are controlled by frequency inverters. - All sanding brushes are equipped with quick-change individual sanding lamellae. - All discs are fitted with air jets for optimized cleaning and cycle time. - Sanding discs are equipped with hook-and-loop fastening system. - Controlled start/end of work to prevent edge breaking on the parts. - The unique sanding system of this machine guarantees the best pre-sanding surface results. - Constant working height; PLC and industrial software allow for line integration. - Infinitely variable speed control for discs, brushes, and feed via full frequency inverter equipment. - Right/left rotation of discs and brushes with different abrasive grits possible. - Additional settings for brushes and discs to balance abrasive utilization and to adjust sanding pressure on the surfaces. - Low follow-up costs thanks to replaceable lamellae. - Low operating noise thanks to the fully enclosed machine housing. - Fully encapsulated machine housing ensures a clean environment, resulting in dust-reduced and protected workspace. - Easy maintenance and setup. - Robust machine bed made from steel tubing guarantees maximum rigidity, stability, and flatness. - All unit drives run on linear ball guideways, enabling high load capacity with precision. Blsdpfx Aieynnttj Eep - 2 separate driven feed belts. Gear motors for each belt: 0.37 kW. - Above the units are upper pressure rollers, D 80 mm, rubber-coated, to securely hold workpieces during feeding. - All units have extraction housings with corresponding extraction nozzles. Cover plate with extraction port. - Machine doors are equipped with electrical safety devices to ensure operator safety. - Machine doors feature windows to monitor workpieces during operation. - Feed speed range from 2 to 12 m/min. - Feed direction: right to left. - Steel fence (zero point) on the right side of the machine. Touch Panel Control 12.7" - The system is equipped with a programmable logic controller (PLC). - Operation of work cycles via user-friendly touch panel. - Large storage capacity of the PLC. - Clear home page display. Fast and simple calculation. - Setting the duration of abrasive operation via touch screen. - Remote service support via our service team. - Large and ...

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] Bjdpfxsuhav Dj Ai Eslp - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: naudotas, Grinding Wheel Dimensions (OD x ID x Width): Ø 650 x Ø 304.8 x 500 mm Min./Max. Grinding Diameter: 3 / 200 mm Regulating Wheel Width: 500 mm Number of Regulating Wheel Speeds: Infinitely variable Regulating Wheel Min./Max. Speed (rpm): 10 / 255 rpm Dressing (auto/manual): Longitudinal auto, penetration manual for both wheels Dressing Speed: 255 rpm Number of CNC Axes: 1 Regulating Wheel Dimensions (OD x ID x Width): Ø 350 x Ø 203.2 x 500 mm Grinding Wheel Width: 500 mm Maximum Grinding Length in Plunge: 500 mm Grinding Wheel Head Motor Power: 55 kW Hydraulic Motor Power: 3 kW Total Power: 60 kW Voltage: 220/380V Length: 2,300 mm Bledpfx Aioix N Ene Eep Width: 2,800 mm Height: 2,100 mm Weight: 15,000 kg

Gamybos metai: 1998, būklė: naudotas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 pinout Window profile processing machine for materials such as PVC, aluminium, and timber windows in a continuous through-feed process. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, an operator control panel, and transport units. Also included are a station with transport system vibrator, chip conveyor unit, and a stand with confirmation printer. Our photos first show the machine at its location, followed by images depicting the system prepared for transport and sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5 mm - Drilling unit with collet chuck (vertical upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical downward) - Twin drilling unit with collet chuck (vertical downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical upward) - Milling spindle, horizontal, with 11 slotting saws - Triple drilling unit with collet chuck (vertical downward) Bodpsu Ibuwsfx Ai Eolp - Triple drilling unit with collet chuck (vertical upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width: 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width: 2,300 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, veikimo valandos: 32 524 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, įėjimo įtampa: 6 300 V, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 1 500 aps./min, kuras: buitinis dujos H, kuro tipas: dujos, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, PLANTA DE GENERACIÓN DE GAS – JENBACHER J616 GS J11 (Paquete Completo) Se trata de una planta de generación completa, que incluye sistema de refrigeración, bombas, sistema de lubricación, sistema eléctrico y sistema de escape. Horas totales de funcionamiento (desde nuevo): 32 524 h Mantenimiento: mantenimiento integral realizado por INNIO Horas desde el mantenimiento mayor a las 30 000 h: 2 524 h Mantenimientos mayores realizados (20 000 h y 30 000 h): completados en su totalidad. En el servicio de 30 000 h se reemplazaron por piezas nuevas los siguientes componentes: turbocompresores, pistones, bielas, camisas de cilindro, segmentos de pistón, así como cojinetes principales y de biela. Datos técnicos Potencia eléctrica: 2 745 kW Año de fabricación: 2016 Combustible: Gas natural Régimen: 1 500 rpm Frecuencia: 50 Hz Alternador: Leroy-Somer Tensión: 6 300 V Alcance del suministro (incluido) Grupo electrógeno Jenbacher Armarios de control auxiliares DIA.NE XT4 Rampa de gas Sistema de refrigeración (bombas de alta y baja temperatura) Caldera de recuperación de fluido térmico Blodpeytg Rbefx Ai Eep Silenciador Cuadros de protección Transformador 6,3 kV / 15 kV, 3 500 kVA (incluido) Documentación Disponibilidad: Inmediata

Būklė: naujas, Number of sanding units: 8 pcs. Sanding width: 180 (260) mm Max. sanding height: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, denibbing, and edge breaking) or intermediate sanding of profiled window bars. Features Softdisc technology for visible surfaces as well as automatic profile and width adjustment. - 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm 1 top-mounted softdisc unit Ø=200mm, 0.75kW, 1 top-mounted lamella roller unit L=200mm, 0.75kW, 1 bottom-mounted softdisc unit Ø=200mm, 0.75kW, 1 bottom-mounted lamella roller unit L=200mm, 0.75kW, 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm - All sanding units feature linear guidance via linear ball bearing sets on hardened shafts - Time-controlled dipping of all lamella roller units directly over the entering edges of the workpieces. This dipping allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable sanding lamella speed via frequency converters for adjusting the sanding intensity (separate for discs, wide rollers, and side rollers) - Disc units as Softdisc with hook-and-loop fastening for sanding discs (wood sanding) - Infeed via three lower and one upper conveyor belts and spring-loaded pressure rollers, with infinitely variable speed 4–15m/min - Touch panel adjustment of parameters: workpiece thickness, workpiece width (left side units individually), dipping depth of side units, spindle speed, feed speed - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width detection and profile recognition as well as automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically sequenced powered infeed roller, automatic clamping of the workpiece, and feeding after unit adjustment - Signal lights red/green for operation status indication - Shortest workpiece length: 380mm - Conveyor belt width: 200mm - Max. workpiece width: 180mm (260mm possible with flipping process) - Workpiece height: 12–160mm - Extraction ports: 4 x 100mm and 2 x 80mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price of the above machine on request! ----- Optional accessories (surcharge): Set of replacement lamella strips for Leistomat SD-200 consisting of Wide units: 30 strips EH45 / 200 - 7 (rollers) 30 strips EH45 / 200 - 20 (rollers) Rabbet units: 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid Bledpsvnv Uhofx Ai Eep with 30 grooves 50mm long Set of replacement lamella strips for SmartFlex lamella disc consisting of 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc D=200mm, grit 220 with velour (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc D=200mm, grit 280 with velour (hook-and-loop), pack of 100 pcs. -----

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, veikimo valandos: 31 881 h, šlifavimo ilgis: 3 350 mm, bendras plotis: 3 600 mm, bendras ilgis: 9 400 mm, bendras aukštis: 2 000 mm, šlifavimo skersmuo: 595 mm, atstumas tarp centrų: 3 000 mm, Year of manufacture: 2013 CNC control: FAGOR 8055TCO Capacity Center distance (mm): 3000 Center height (mm): 300 Center height above floor (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotary table ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable step (mm): 0.001° Grinding slide (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable step (mm): 0.001° Resolution (mm): 0.0005° Bedpfoyudtpox Ai Eelp Grinding head Diameter of left grinding wheel (mm): 600 Peripheral speed (m/s): 45 Workpiece headstock Spindle speed (rpm): 9 ÷ 250 MT taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (MT): 6 Maximum spindle stroke (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Diamond dressing device with diamond holder for tailstock Diamond Grinding wheel guard according to ISO, OSHA, and UNE standards Double-door enclosure Paper feed and magnetic separator Grinding wheel balancing arbor MARPOSS electrodynamic balancing mechanism Grinding wheel safety sensor Axial positioner with T25 probe Grinding wheel chuck Drive dog Machine dimensions / Weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000

Būklė: naudotas, mašinos/transporto priemonės numeris: 008431, Darbo sritis X ašyje: 6360 mm Darbo sritis Y ašyje: 1905 mm Darbo paviršius: Su vakuuminėmis konsolėmis Kontroliuojamų ašių skaičius: 5 ašys Bledpfxjym Rphe Ai Esp Gręžimo galvučių skaičius: 10 Įrankių vietų skaičius: 60

Būklė: labai geros būklės (naudotas), Smulkinimo malūnas, plaktukiniai malūnai, diskų malūnas, pulverizatorius, pagalbinis malūnas, granuliatorius, smulkintuvas, miltų malūnas, granulių malūnas, granuliatorius, rotacinis malūnas, perdirbimo technologija, aglomeratorius. – Vaizdo įrašas: sprendimas vario ir aliuminio radiatorių perdirbimo linijai. – Būklė: naujas, be valdymo sistemos. – Gamintojas: WIPA, pagalbinis plaktukinis malūnas. – Tipas: WPZ 750-45. – Variklio galia: 45 kW. – Plaktukų skaičius: 4 vnt. – Priešpjausmenų skaičius: 6 vnt. – Įleidimo anga: Ø 400 mm. – Išleidimo anga: aukštis reguliuojamas. – Skaičius: yra 3 vnt. – Kaina: už vienetą. – Matmenys: 1160/2335/H1550 mm. – Svoris: 2100 kg. Blodpfezbk Tisx Ai Eep

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers Blsdpfx Aiovnv Tqs Esp - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...