Šlifavimo staklės be centro

ESTARTA 327

Būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 4507, Centerless grinding machine ESTARTA 327 Gjdpeg Ix Hmofx Ah Aoit

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking Gijdpferqwbijx Ah Ajt • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Būklė: visiškai atnaujintas (naudotas), GENERAL FEATURES Min/max diameter to grind: 3 / 200 mm Maximum plunge grinding length: 500 mm Grinding wheel dimensions (OD x ID x width): Ø 650 x Ø 304.8 x 500 mm Grinding wheel width: 500 mm Regulating wheel width: 500 mm Number of regulating wheel speeds: Infinite Min/max regulating wheel speed (rpm): 10 / 255 rpm Dressing (Auto/Manual): Automatic Dressing speed: 255 rpm Lubrication (Auto/Manual): Automatic Control type (CNC/Manual): CNC CNC brand: FANUC CNC model: Oi - TF Plunge (auto/manual): Automatic Regulating wheel dimensions (OD x ID x width): Ø 350 x Ø 203.2 x 500 mm ELECTRICAL CHARACTERISTICS Grinding wheel spindle motor power: 55 kW Hydraulic motor power: 3 kW Total power: 60 kW Voltage: 220/380V Gjdpfx Ahed I Um Re Ajit DIMENSIONS AND WEIGHT Height: 2,100 mm Width: 2,800 mm Length: 2,300 mm Weight: 15,000 kg OTHER FEATURES Included accessories: * Throughfeed work rest, 1,000 kg block and tackle, Safety casing, CE Year: 1991 Serial number: 765142

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Max. machining diameter: 32 mm Max. machining length: 320 mm with 1 collet Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution: 0.001° Sub spindle speed: 200–8,000 rpm Max. clamping diameter, sub spindle: 32 mm Max. front drilling diameter: 12 mm Gsdpfx Aheydaads Aoit Max. front tapping capacity: M10 Max. rear tapping capacity: M10 Spindle through bore diameter: 37 mm Number of mountable tools: up to 25, depending on type Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m / 2,048 kB Minimum input unit: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1,500 mm No guarantee is given for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machinable length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12 mm - Travel (Z-axis): 120 mm - Spindle speed: 7,000 rpm BUSHING HOLDER 1 - Number of positions: 5 Gisdpfx Ajuhaw Ish Ajt FRONT TOOL POST - Number of positions: 3 BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS AND WEIGHT - Footprint: 1,500 x 770 mm - Machine weight: 1,400 kg ACCESSORIES - Control: Fanuc - 3-color status lamp - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Electrical transformer

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Gijdpfxot Hw N He Ah Ast Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: labai geros būklės (naudotas), Manufacturer: HEYLIGENSTAEDT Model: NDC 710 / 1800 Control: R&D MTC3 4-jaw chuck 1400 mm Steady rests: 3 units, Ø 100–1050 mm Roller steady rests: 2 units, open type, Ø 1120 mm KNOLL chip conveyor, year 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm Gsdpfx Aowzh A Ajh Asit Turning length: 8250 mm Swing over bed Ø: 1400 mm Swing over cross slide: 1120 mm Spindle power: 100 kW Workpiece weight: 16,000 kg Length: 14,000 mm Width: 3,500 mm Height: 2,900 mm Weight: 32,000 kg

Būklė: labai geros būklės (naudotas), Star SA-12 Swiss-Type Automatic Lathe Technical Data Rapid Traverse (X, Y, Z, ZB): 370 mm Maximum Feed Travel (X, Y, Z, ZB): 270 mm Minimum Input Increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum Turning Diameter: 13 mm Maximum Headstock Stroke: 140 mm Maximum Drilling Capacity: 7 mm Maximum Tapping Capacity: 7 mm Maximum Thread Cutting Capacity: M6 x P1.0 Main Spindle Spindle Speed: 500 – 12,000 rpm Drive: Spindle Drive Main Spindle Motor: 2.2 / 3.7 kW Main Spindle Indexing Angle: 1° or 15° Spindle Bore: 20 mm Tool Slide Type: Linear Slide Number of Tools: 6 tools Number of Driven Tools: 3 tools (Collet: ER 11) Driven Tools Spindle Speed: 1,970 / 2,330 rpm Max. Drilling Capacity: 4 mm Max. Milling Capacity: 4 mm Sub-Spindle Max. Clamping Diameter: 13 mm Max. Part Length for Front Ejection: 85 mm Max. Unclamping Length: 30 mm Spindle Speed: 500 – 8,000 rpm Sub-Spindle Motor: 0.5 kW Tool Selection: 4 tools Max. Drilling Capacity: 4 mm Gijdpfxewi Ty As Ah Aot Max. Tapping Capacity: M3 x P0.5 Power Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power Consumption: Average 6.0 KVA SCOPE OF SUPPLY Including (not limited to): STAR SA-12 Swiss-Type Automatic Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Feeder Exact scope of supply according to the photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Būklė: labai geros būklės (naudotas), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Longitudinal travel, X-axis: 1520 mm Cross travel, Y-axis: 650 mm Vertical travel, Z-axis: 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Gijdpfx Aewlh Adoh Aot Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Electronic control: Elcon 3

Būklė: naudotas, Gamybos metai: 1992, Technical details: X-travel: 800 mm Y-travel: 550 mm Z-travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Spindle speed range: 0–600 and 600–4000 stepless rpm Feed rate: 1–3000 mm/min stepless Rapid traverse: 6 m/min Table clamping surface: 1100 x 600 mm Table feed: 1–3000 mm/min stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH): approx. 2.9 x 2.2 x 2.5 m Additional technical specifications: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang min./max.: 200 / 750 mm Gedpeu Nda Eofx Ah Asit Equipment: - Coolant tank with pump - Handheld control unit - Heidenhain linear measuring system