Centrinis šlifavimo staklės

ESTARTA 327

Sąlyga: naudotas, Grinding Wheel Dimensions (OD x ID x Width): Ø 650 x Ø 304.8 x 500 mm Min./Max. Grinding Diameter: 3 / 200 mm Regulating Wheel Width: 500 mm Number of Regulating Wheel Speeds: Infinitely variable Regulating Wheel Min./Max. Speed (rpm): 10 / 255 rpm Dressing (auto/manual): Longitudinal auto, penetration manual for both wheels Dressing Speed: 255 rpm Number of CNC Axes: 1 Regulating Wheel Dimensions (OD x ID x Width): Ø 350 x Ø 203.2 x 500 mm Grinding Wheel Width: 500 mm Maximum Grinding Length in Plunge: 500 mm Credpfsix N Enex Admjk Grinding Wheel Head Motor Power: 55 kW Hydraulic Motor Power: 3 kW Total Power: 60 kW Voltage: 220/380V Length: 2,300 mm Width: 2,800 mm Height: 2,100 mm Weight: 15,000 kg

Sąlyga: naudotas, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar capacity: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: Z axis CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: Z axis CNC-controlled - Slide unit 6.1: Z axis CNC-controlled + SCARA axis - Slide unit 6.2: X and Z axes CNC-controlled - Slide unit 6.3: X axis CNC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW WEIGHT AND DIMENSIONS - Footprint: 3329 x 2032 mm - Height: 2654 mm - Weight: 7,100 kg HOURS - Power on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - CNC Siemens 840D (PL) double NCU - 2 CNC control panels - 6 TOPLUS collet receivers with integrated stop - 1 counter spindle at position 6.1 Crodeuhantepfx Admok - Clamping device in counter spindle: Röhm chuck KFD-HS 110/3 - Counter spindle internal coolant supply - CNC options for counter spindle / polygon turning device - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft at positions 1, 2, 3 - Preparation for 2 additional operations with electronic shaft at positions 4, 5, 6 - STAUBLI robot type TX60 (6 axes) - Robot gripper with external double clamping, type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps 40 bar - BÜSCHEL oil mist extraction system - RIEDEL cooling unit - ARTIS pre-installation

Sąlyga: visiškai atnaujintas (naudotas), GENERAL FEATURES Min/max diameter to grind: 3 / 200 mm Maximum plunge grinding length: 500 mm Grinding wheel dimensions (OD x ID x width): Ø 650 x Ø 304.8 x 500 mm Grinding wheel width: 500 mm Regulating wheel width: 500 mm Number of regulating wheel speeds: Infinite Min/max regulating wheel speed (rpm): 10 / 255 rpm Dressing (Auto/Manual): Automatic Dressing speed: 255 rpm Lubrication (Auto/Manual): Automatic Control type (CNC/Manual): CNC CNC brand: FANUC CNC model: Oi - TF Plunge (auto/manual): Automatic Regulating wheel dimensions (OD x ID x width): Ø 350 x Ø 203.2 x 500 mm ELECTRICAL CHARACTERISTICS Grinding wheel spindle motor power: 55 kW Hydraulic motor power: 3 kW Total power: 60 kW Voltage: 220/380V DIMENSIONS AND WEIGHT Height: 2,100 mm Width: 2,800 mm Length: 2,300 mm Weight: 15,000 kg OTHER FEATURES Included accessories: * Throughfeed work rest, 1,000 kg block and tackle, Safety casing, CE Year: 1991 Serial number: 765142 Csdpfjd I Um Rjx Admerk

Sąlyga: naudotas, Gamybos metai: 2016, x-travel 6,500 mm y-travel 4,250 mm z-travel 1,500 mm Control HEIDENHAIN iTNC 530 HSCI Table size 7,500 x 3,000 x 300 mm Distance between columns 3,800 mm Rapid traverse x/y/z 30,000 mm/min Tool holder HSK 100 Spindle speed 6,000 rpm Gear stages 2 Motor power 37 kW Operating hours 28,475 h Spindle hours 12,629 h Tool changer 60-fold Internal coolant supply 36 bar Cjdsxb Ed Uepfx Admork Chip conveyor double Milling head 5-axis milling head OAD Total power requirement 80 kVA Machine weight approx. 85 t Milling head OAD fully water-cooled. - 6,000 rpm without time limitation. - The patented rotation system by Correa with fixed double toothing allows an indexing every 0.02º. As the gearing is not free-moving, maximum rigidity and precision are ensured. - Negative angles up to 45 degrees can be achieved. - Milling spindle mod. FCT (4,000 rpm / 1,893 Nm / HSK 100) - Head extension mod. AL600 (1,500 rpm / 1,298 Nm / ISO 50) - Head changer station for 3 heads - M&H 20.41

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Swing diameter: 420 mm, turning length: 820 mm, spindle bore: 105 mm, spindle speed: 3,000 rpm, spindle power: 22 kW, X/Z travel: 280 mm/820 mm, tool stations: 10, driven tool speed: 6,000 rpm. Machine dimensions X/Y/Z: approx. 4,400 mm/2,100 mm/2,300 mm, weight: approx. 6,000 kg, control unit: Mitsubishi M-720BM (MAPPS 2), operating hours: 10,000 h. Various accessories included. The driven tools were never used; only the Y-axis has been in operation. Measuring arm and ball screw of the Y-axis are like new. Documentation available. On-site inspection possible. Codpsv I U Iyjfx Admork

Sąlyga: naudotas, Gamybos metai: 2007, Maximum gear diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Center distance: 70...1220 mm Stroke length: 30...330 mm Strokes per minute: 10...200 spm Total power requirement: 138 kW Machine weight approx.: 38 t Space requirement approx.: 11x5 m Machine: Full CNC machine with electronic hobbing synchronization for C and D axes and digital INDRAMAT drive technology. Self-rigid welded machine bed construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around, Longitudinal guide with recirculating roller shoes. Precision ground, preloaded ballscrew with backlash-free preloaded nut. Digital AC drive technology with backlash-free gearbox. Linear measurement system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded twin worm gear, segment gear diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Table bore diameter 500 mm continuous, open at the bottom. Credpfx Ajv E R Eiodmsk Water-cooled digital AC servo motors. The machine must be installed on a foundation. Column: Machine column as highly rigid cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide and wrap-around with recirculating roller shoes. Precision ground ballscrew with backlash-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shaping Head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and gear cutting wheel lift-off, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight and side guidance of the lift-off. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Number of strokes: 10 - 200 spm, stroking speed: 5 - 45 m/min. Shaping spindle speed for working and return stroke can be programmed independently. Spindle speed is constant in the cutting area. Maximum gear cutting wheel speed: 10 rpm, digital AC drive technology. Gear cutting wheel lift-off direction can be manually reversed for internal and external gear cutting. Shaping spindle axis can be manually adjusted up to 50 mm off machine center to avoid return stroke collision of the gear cutting wheel.

Sąlyga: geras (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 120K587, Good day, For sale is a well-maintained Quaser MV204II universal CNC milling machine with HEIDENHAIN control system, offering an unbeatable price-performance ratio. The purchase price includes: tool changer, touch probe, chip conveyor, coolant system, hydraulic system, documentation/machine manuals, etc. Crsdpfx Adepfawhemek Machine dimensions: Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Axis travel: X-axis travel: 1,020 mm (feed rate: 32,000 mm/min) Y-axis travel: 600 mm (feed rate: 32,000 mm/min) Z-axis travel: 560 mm (feed rate: 32,000 mm/min) Milling table: Table size: 635 x 1,200 mm Table load capacity: 1,000 kg Table configuration: 6 x 18 mm H 8 T-slots Milling spindle: Max. spindle speed: 7,500 / 10,300 rpm Max. spindle torque: 252 Nm Further technical details available upon request. A viewing appointment can be arranged at short notice. Best regards,

Gamybos metai: 2007, Sąlyga: naudotas, Wheel diameter - max. 400 mm Wheel width - mm Module - max. - Workpiece diameter 36-300/400 mm Centre distance 135-290 mm Spindle speeds - stepless up to 3000 rpm Codpfx Adsgr Harjmork Centre distance between tips 100-550 mm Control system Machine weight approx. 4,000 kg Required floor space approx. 2000 x 3055 x 2788 mm Control system: CNC Siemens 840 D Testing methods: - Single-flank rolling test - Double-flank rolling test - Structure-borne noise test - Heli test in double-flank contact Features: - Use of up to 6 test slides - Maximum testing precision and repeatability - Machine table with workpiece drive - Swivelling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Sąlyga: geras (naudotas), Gamybos metai: 2000, Daewoo Puma 230, Year of manufacture: 2000, Control: Fanuc 18 iT, Turning length: 548 mm, Turning diameter: 350 mm, 10-position turret, Tailstock: dragged, Three-jaw chuck Ø 254 mm, Tool measuring arm, Chip conveyor, Coolant system, Crsdpfx Adowx I Efjmok Main spindle with new bearings, Flat guideways, Accessories,

Sąlyga: geras (naudotas), Gamybos metai: 2015, Labai geras įrenginys – tikslus ir patikimas... dirbo tik vienoje pamainoje (8–10 valandų per dieną) Crodsv Acphepfx Admek