2010 ARBURG 570 A 2000-800

ARBURG 570 A 2000-800

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 – RC300 Robot TECHNICAL DATA: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Bcjdpfxow Aw Tae Abfou Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticising capacity (3-zone screw): 222.9 g/s Plasticising capacity (barrier screw): 279.2 g/s Injection performance: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Max pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (including nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. platen distance: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (H x V): 2,000 x 1,600 mm Platen size (H x V): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main motors power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling power (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – control via machine panel Machine in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical parts). Machine is under power, test run possible. AVAILABLE IMMEDIATELY For further information, please contact us – we can provide additional photos, a working video, technical documentation, and arrange a convenient appointment for inspection.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 55 806 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 500 kN, varžto skersmuo: 45 mm, bendras ilgis: 4 700 mm, bendras plotis: 1 700 mm, bendras aukštis: 2 000 mm, bendras svoris: 4 850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling system of the type Multi Select, axis X/Y/Z 600/600/1400 mm. The machine is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1500 kN Tie-bar distance: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours (pump): 55,806 h Injection cylinder: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1580 bar Dimensions: approx. 4700 x 1700 x 2000 mm Weight: 4850 kg Transport and loading can be organized throughout Europe for an additional charge, if desired. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Bodpjw E Itijfx Abfjcu For more information or ways to contact us, please visit our website.

Sąlyga: naudotas, Gamybos metai: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has been professionally dismantled, and is stored in a warehouse. Technical Details - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for mould shells - Number of heating modules: 10 - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been serviced regularly Machine equipped with: - Sidel elevator for preforms to the unscrambler Bcodorkgy Uopfx Abfju - Sidel preform unscrambler & feeding system - Sidel oven & blow wheel for 6 cavities - Sidel control cabinet - Sidel PCC drive & control panel - Comprehensive spare parts list available on request

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2006, veikimo valandos: 33 107 h, Funkcionalumas: visiškai funkcionalus, Top machine from cleanroom production (pharmaceutical industry) - With rotary table 820 mm - With GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - Only 33,107 operating hours - Safety enclosure / safety cage - Horizontal conveyor belt - Hardly any paint damage / almost as new condition - Fully functional The machine can be inspected under power by prior arrangement. Technical Data Manufacturer: Engel Type: V 330H/80V/130 Combi Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions (L/W/H): see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control unit: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1,300 kN / 130 t Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to follow Heating capacity: to follow Total installed power: to follow The machine is available immediately from our warehouse in Hanover, Germany and has been tested. Extras - Rotary table (820 mm diameter) - Geku Robot SR 500 ST - Safety enclosure / safety cage - CC 200 German/English GEKU Robot Details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A swing axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not present Warranty Warranty until initial commissioning Loading/shipping Bcsdpfxoub Umqs Abfeu Free loaded onto buyer's truck or delivered free within Germany against reimbursement of freight costs from our warehouse in Hanover, Germany Financing - on request – hire purchase option Price on request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: M2019011975, vėsinimo galia: 430 kW (584,64 AG), Carrier Chiller 30 RBP-430-0095-PE (AquaSnap Serija) Tipas: Oras-vanduo skysčio aušintuvas Modelis: 30RBP-430-0095-PE Variantas: 30RBM/RBP Serijinis numeris: M2019011975 Pagaminimo ir bandymo metai: 06/2019 Gamintojas: Carrier SCS, Montluel, Prancūzija (United Technologies, Carrier Corporation, JAV) Techninės specifikacijos: Nominali aušinimo galia: 430 kW Šaltnešis: R-410A A grandinė: 23,50 kg / B grandinė: 26,70 kg Bendras užpildas: 50,2 kg GWP: 2088 Kompresoriai: Danfoss Scroll SH240A4ACE (su termine apsauga) Bedpfoxb D Rasx Abfscu Maitinimas: 400 V / 3 fazės / 50 Hz Maksimalus srovės poreikis: 340 A Maksimalus paleidimo srovės poreikis: 210 A Galingumas: 210 kW Darbinės temperatūros diapazonas: –20 °C iki +52 °C Grynas svoris: 2760 kg Apsaugos klasė: IP54 Slėgio duomenys: Šaltnešis: R-410A Leidžiamas slėgis (min/max): Aukštoji pusė (PS): –1,0 / 44,2 bar (–99,0 / 4420,0 kPa) Žemoji pusė (PS): –1,0 / 31,1 bar (–99,0 / 3110,0 kPa) Apsauginio vožtuvo nuostatos: 42 bar Sproginės diafragmos nuostatos: 45 bar Bandomasis slėgis: 15,0 bar (sandurumo testas) Papildoma informacija: Oras-vanduo aušinimo sistema su ašiniais ventiliatoriais ir integruotais kondensatoriais. Elektroninė valdymo spinta su Carrier valdymo sistema. Hermetiškai sandari sistema, pridedamas originalus Carrier aptarnavimo žurnalas. Prižiūrėta ir aptarnauta „Carrier“ autorizuotame serviso centre.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 53 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 206432, spaudimo jėga: 2 000 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 570 mm, darbinio tūrio: 392 cm³, įpurškimo slėgis: 2 000 juosta, išstūmimo eiga: 225 mm, bendras svoris: 7 450 kg, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines built from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current information – Tax notice and advantage for used machinery: From 01.07.2025, used machines can also benefit from a special depreciation of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (LxWxH): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete 50 mm highly wear-resistant thermoplastic cylinder - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with two variable delivery pumps - GOLDEN EDITION anniversary model - Thermoplastic processing - 50 mm open nozzle - Extended 50 mm nozzle tip - Heating band for open nozzle - Heating band for extended nozzle tip - 570 central clamping plate configuration, ⌀ 125 mm - Two air-blast units with pressure regulator - Connection for air-blast unit 1 - Connection for separating unit - Core pull 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Interface for robot system (EUROMAP 67), 50-pin - Interface for ARBURG host computer - Socket distributor: 1 CEE, 1 Schuko additional - Serial printer interface USB - CompactFlash interface for data storage - Operator authorisation via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for colouring unit - Manual adjustment for free cooling circuits - Machine-specific cooling circuits controlled - Equipment package: advanced monitoring - Equipment package: extended movement - Equipment package: production control - Equipment package: optimisation / operator assistance - Equipment package: quality assurance - Equipment package: documentation Complete documentation available Injection unit: Screw diameter: 50 mm Injection weight: 359 g/PS Injection pressure: 2000 bar Bcodpfxjw Tt R Io Abfeu Injection volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie-bar clearance: 570 x 570 mm Mounting plates: 795 x 795 mm Tool installation height: 300 mm Max. plate distance: 950 mm Opening stroke: 650 mm Ejector stroke/force: 225 mm / 66 kN Clamping system: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany, and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Free loaded onto the buyer’s truck, or free house delivery for transport reimbursement, available ex stock Hannover, Germany A summary of our machines and company: - We only sell machines we have purchased from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers trading with third-party property - All machines come from successful companies that have given them proper maintenance and care - All machines offered can be viewed at our warehouse

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 23 170 h, spaudimo jėga: 2 500 kN, varžto skersmuo: 60 mm, įpurškimo slėgis: 2 005 juosta, injekcijos svoris: 618 g, formos aukštis (min.): 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article Number: 225 Availability: In stock Year of Manufacture: 2016 Brand: KRAUSS MAFFEI Technical Data Injection Weight: 618 g Bcodjvtzkfepfx Abfju Injection Rate: 848 cm³/s Clamping Force: 2,500 kN Screw Diameter: 60 mm Injection Pressure: 2,005 bar Tie Bar Distance: 630x630 mm Platen Size: 1135x1180 mm Minimum Mold Height: 330 mm Maximum Platen Opening: 1,150 mm Control System: MC6 Language: German Power: 70 kW Operating Hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Hopper: No Core Pull: Yes Euromap Interface: Yes Air Valve: Yes Heated Channels: Yes Gas Accumulator: Yes

Sąlyga: naudotas, rida: 145 442 km, galia: 120 kW (163,15 AG), pirmoji registracija: 03/2010, kuro tipas: dyzelinas, bendras svoris: 5 000 kg, spalva: balta, pavaros tipas: mechaninis, sėdimų vietų skaičius: 2, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), galinis keltuvas, oro kondicionavimas, suodžių filtras,

Sąlyga: geras (naudotas), Gamybos metai: 2006,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 33 107 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 300 kN, varžto skersmuo: 25 mm, darbinio tūrio: 79 cm³, įpurškimo slėgis: 2 398 juosta, išmetimo jėga: 6 100 N, išstūmimo eiga: 100 mm, atvērimo eiga: 606 mm, plokštės ilgis: 750 mm, plokštės plotis: 850 mm, bendras svoris: 10 600 kg, Įranga: dokumentacija / vadovas, Techniniai duomenys Gamintojas: Engel Modelis: V 330H/80V/130 Combi Cleanroom Metai: 2006 Darbo valandos: 33 107 h Sraigtai: 25/22 mm Mašinos svoris: 10 600 kg Papildoma įranga įskaičiuota: GEKU SR 500 ST robotas Apsauginis narvas Sukamasis stalas Mašina dirbo beveik 33 107 valandas automatinėje veikimo būsenoje. Bedpfx Ast A Ui Aobfjcu Aktualu – Mokesčių patarimas ir naudotos mašinos privalumas Nuo 2025-07-01 naudotos mašinos gali būti nurašomos su specialia 30% metine amortizacija. Be palankesnės kainos, palyginti su nauja įranga, galite pasinaudoti tokiomis pačiomis amortizacijos galimybėmis kaip ir naujai įrangai. Raktažodis: Augimo skatintojas (§ 7 straipsnio 2 dalis EStG-E)