Arburg 520S 1300-400 (2015)

Arburg 520S 1300-400

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 44 600 h, Funkcionalumas: visiškai funkcionalus, 1,0 vnt naudota dviejų komponentų liejimo mašina su robotu Hfodpfju E E H Sex Af Isb Gamintojas: ARBURG Tipas: 570S2200-400/170e² Metai: 2010 Uždarymo jėga: 220 tonų Kolonų atstumas: 570 x 570 mm Montavimo aukštis min./maks.: 350 mm Atidarymo eiga: 1.000 mm Sraigtas DN 1: 35 mm Didž. įpurškimo tūris: 154 cm³ Liejinio svoris: 141 g/PS Sraigtas DN 2: 30 mm Įpurškimo tūris: 59 cm³ Liejinio svoris: 47 g/PS Valdymas: SELGOCIA Įranga: 3 x šerdžių trauktuvai Vertikali įpurškimo sekcija 6 ašių robotas, gamintojas: KUKA, tipas: KR 16 Wikut, metai: 2010 Konvejeris Apsauginė tvora

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Hfedjw T Sc Nspfx Af Ijb Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 - Perdavimų stalo rankiniam perdavimui Hfedpfx Ajw Nbacsf Iob - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Presas: 2 ciklai/min Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5m straightening beam. It is capable of processing beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with Stierli’s proven stroke fine adjustment control, making it very easy to use and enabling fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyors, NC control, laser measurement, etc. (Note: The photo does not show the original machine.) Hfedpfx Ajufhzvef Ieb

Sąlyga: naudotas, Gamybos metai: 2006, Technical Details: X-axis travel: 800 mm y-axis travel: 800 mm z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Hedpfx Aspumdcsf Iofb CNC control: SIEMENS 840D shopmill Tool magazine capacity: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, IKZ (internal coolant supply) 40 bar, Prepared for Renishaw MP 10 infrared measuring probe, probe not included, Mechanical tool breakage detection, MQL (minimum quantity lubrication), Through-spindle air blast, Electrical oil mist extraction, Electronic handwheel, TRANSMIT function, Precision package, BA 4, Laminated safety glass (right door), Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including loading station, stacker crane, master computer and 10 pallets. Approx. 98,500 hours main switch ON Approx. 45,500 spindle hours

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: 3018-04, Country of Manufacture: Switzerland Voltage: 380/50/3 Net Weight: 3100 kg Overall Dimensions: 230x155x170 cm Installed Power: 13 kVA Customs Code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre Distance: 650 mm Grinding Capacity SpW+bs -80 Stroke: 700 LONGITUDINAL SLIDE Max. Travel: SpW+50 mm Minimum Automatic Feed: 1.5 mm Speed: 50-5,500 mm/min Reversal Dwell Time: 0-6 sec. Maximum Table Swivel: 12°/10°/8.5°/6° Pneumatic Table and Workhead Relief CROSS SLIDE Max. Travel: 300 mm Rapid Traverse: 60 mm Plunge Depth (diameter): 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per Pulse: 0.001-0.05 mm WHEELHEAD Left Wheel, Outer Grinding: 400x80x127 mm Drive Power: 5.5 kW Peripheral Speed: 35 m/s Rotational Speed: 1670/2110 rpm Internal Grinding Device for Belt-driven Spindles, incl. drive unit: 1.5 kW Hodpfxow T Sd Tj Af Isfb WORKHEAD Swivel Range: 0-90° Continuously Variable Speed: 30-1000 rpm Internal Taper: Morse 5 Clamping Collets: W-25 Drive Power: 0.55 kW Max. Workpiece Weight (between centers): 130 kg Load for Non-Supported Grinding: 100 Nm TAILSTOCK Internal Taper: Morse 3 Quill Stroke: 35 mm Fine Adjustment for Cylindricity Correction: ± 40 µm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Generatrix Straightness over 630 mm: 0.003 mm Roundness in Unsupported Grinding: 0.0003 mm CONNECTION VALUES Max. Power Consumption: 13 kVA Permissible Voltage Fluctuation: -15% +10% Permissible Frequency Variation: ± 3% Required Compressed Air Pressure: 5 bar Except for error or omission, the above technical data are provided without obligation.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min TILTING AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER Hfjdpfxeuhbv Sj Af Iob - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400 x 400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Space requirement: 4,100 x 2,300 mm - Machine height: 2,720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Direct measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin wash - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe - Workpiece measuring probe: Renishaw OMP60

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 55 806 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 500 kN, varžto skersmuo: 45 mm, bendras ilgis: 4 700 mm, bendras plotis: 1 700 mm, bendras aukštis: 2 000 mm, bendras svoris: 4 850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling system of the type Multi Select, axis X/Y/Z 600/600/1400 mm. The machine is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1500 kN Tie-bar distance: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours (pump): 55,806 h Injection cylinder: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1580 bar Dimensions: approx. 4700 x 1700 x 2000 mm Weight: 4850 kg Hfodpfx Aew E Itief Iob Transport and loading can be organized throughout Europe for an additional charge, if desired. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Sąlyga: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Hfjdpsvca Izsfx Af Ieb Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Sąlyga: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Hfjdpswtgcxofx Af Ijb Fuse protection: 25 A Condition: used