5 ašių apdirbimo centras MATEC - 40HV

Matec 40HV

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, X ašies eiga: 3 000 mm, Y ašies eiga: 825 mm, Z ašies eigos atstumas: 1 100 mm, greitas poslinkis X ašimi: 48 000 m/min, greitas poslinkis Y ašis: 80 000 m/min, greitasis eiga Z ašyje: 48 000 m/min, stalo plotis: 835 mm, stalo ilgis: 3 500 mm, stalo apkrova: 3 500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-Axis travel: 3000 mm Y-Axis travel: 825 mm Z-Axis travel: 1100 mm B-Axis swiveling: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg Feed rate X-Axis: 48,000 mm/min Feed rate Y-Axis: 80,000 mm/min Feed rate Z-Axis: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply (IKZ): 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Lrodpfxewyv Nzo Af Isg Height: 3,800 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Twin-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y-axes Each turret with 15 stations, BMT 44 Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Right spindle: 11/7.5 kW, Kitagawa three-jaw chuck Finished parts gripper Conveyor belt Bar feeder interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M-function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Lrjdpevxu Eaefx Af Isg Tool monitoring for spindle and driven tools Spindle flushing through sub-spindle high-pressure coolant, Deublin rotary union Hinged belt chip conveyor Transformer Available immediately

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 1 500 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, veleno greitis (maks.): 6 000 aps./min, stalo plotis: 1 100 mm, stalo ilgis: 3 500 mm, bendras aukštis: 4 164 mm, bendras plotis: 5 875 mm, bendras ilgis: 9 120 mm, sukimosi greitis (maks.): 6 000 aps./min, ruošinio svoris (maks.): 8 000 kg, bendras svoris: 29 000 kg, sukimo momentas: 760 Nm, ACCESSORIES Cooling System: Yes Through-Spindle Cooling: Yes Portable Handwheel: Yes Workpiece Touch Probe Heidenhain: Yes Preparation for Renishaw Touch Probe: Yes Full Enclosure / Integral Splash Guard: Yes Lrodpfx Afoulwy As Ijg Chip Conveyor (2 Augers + 1 Side Hinged): Yes Automatic Tool Changer (ATC): Yes (24 tools)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 500 mm, Y ašies eiga: 1 100 mm, Z ašies eigos atstumas: 1 500 mm, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 40 m/min, greitasis eiga Z ašyje: 40 m/min, sukimosi greitis (maks.): 7 000 aps./min, ašies variklio galia: 34 W, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Naudota judančio stovo frezavimo staklė su CNC H. TNC-530 valdymu. Ledpsxyw Tfsfx Af Iorg

Sąlyga: beveik kaip naujas (naudotas), Komplett aus Spezial-Edelstahl gefertigt Spezialisiert auf das Zerkleinern von Käse- und Hartkäseblöcken Lochscheibendurchmesser: 200 mm Trichtervolumen: ca. 400 Liter Synchronisierte Geschwindigkeit für Brech- und Zuführschnecke Arbeitswelle Maschinenabmessungen in cm: Breite: 215,0 Tiefe: 150,0 Höhe: 196,0 Hauptantriebsleistung: 45 kW Installierte Gesamtleistung ca. 65 kW Lsdpfepgnftox Af Isrg Spannung: 380 V, 50 Hz

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle - Standard spindle 15,000 rpm - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: Lrsdpfx Afjx Eh Iqs Iog - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: labai geros būklės (naudotas), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has barely been used. TECHNICAL DATA Lodpeu Hanyefx Af Isrg Polishing wheel: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2005, veikimo valandos: 48 898 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: Heidenhain iTNC 530, ruošinio svoris (maks.): 2 000 kg, bendras aukštis: 3 400 mm, bendras ilgis: 6 000 mm, bendras plotis: 4 500 mm, sukimosi greitis (min.): 30 aps./min, bendras svoris: 15 800 kg, veleno greitis (min.): 18 000 aps./min, įrankių magazino lizdų skaičius: 40, Year of manufacture: 2005 CNC control: Heidenhain iTNC 530 Axes Travel X-axis [mm]: 1000 Travel Y-axis [mm]: 1000 Travel Z-axis [mm]: 1000 C-axis indexing [°]: 360° (0.001) A-axis indexing [°]: 130° B-axis indexing [°]: 0-190° Feed rates [m/min]: 60 Rapid traverse [m/min]: 60 Lredpfx Aexur Sxjf Isg NC milling/turning table: Number of pallets: 1 Pallet dimensions [mm]: Ø1100 x 900 Max. workpiece weight [kg]: 2000 Table speed [rpm]: 30 Spindle Max. spindle speed [rpm]: 18000 Cooling Coolant supply through spindle [bar]: 40 Tank capacity [L]: 980 High-pressure cooling [bar]: 40-80 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 40 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Rinsing pistol Blow air through spindle center selectable via M function Laser tool measurement for tool length and diameter 3D quickSET Prepared for internal cooling (40/80 bar) Paper band filter Machine operating time: Hours powered on: 144180 Spindle operating hours: 48898 Total power requirement [kVA]: 65 Basic machine: dimensions / weight Length [mm]: 6000 Width [mm]: 4500 Height [mm]: 3400 Weight [kg]: 15800

Sąlyga: naudotas, X ašies eiga: 6 000 mm, Y ašies eiga: 1 800 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 4 500 aps./min, Įranga: sūkių greitis be galo kintamas, X-AXIS TRAVEL 6000 MM Y-AXIS TRAVEL 1800 MM Z-AXIS TRAVEL 1000 MM WORKTABLE DIMENSIONS 7300 X 1090 X H 900 MM SPINDLE NOSE MOUNT ISO 50 SPINDLE SPEED 0 - 4500 RPM AUTOMATIC INDEXING HEAD 2.5° X 2.5° CNC CONTROLLER SELCA 3045 PD EXTERNAL AND INTERNAL HIGH-PRESSURE COOLING TOOL CHANGER WITH 60 POSITIONS NO. 01 CNC-CONTROLLED DIVIDING HEAD Lrjdpfx Afev H D Exo Iog

Sąlyga: geras (naudotas), Gamybos metai: 2010, X Y Z: 1270 x 508 x 508 mm, stalas 1324 x 457 mm, 12000 aps./min, BT 40, HAAS valdymas, 24 pozicijų ATC, 40 AG, drožlių sraigtas, aušinimas, Haas TR210 penkių ašių pasukamas stalas. Lrodpfxoxpw Rve Af Ieg