Tiesinimo ir lenkimo presai pirkti naudotą (55)

Gamybos metai: 2023, Sąlyga: naujas, DPM 1070 x 150ton Hidrolik Atölye Presi Kapasite: 100 ton Diğer birçok boyut ve kapasite mevcuttur. • Çelik kaynaklı şasi • Kullanımı kolay • İstediğiniz konumda durdurabilme • Basınç manometresi • Aşırı yüklemeye karşı emniyet valfi • Standart V-Bloklar (2 adet) • Ayarlanabilir tabla yüksekliği Hjdpfxsgyta Hs Abmofr • Tabla yukarı-aşağı hareket aparatı • Özel joystick ile kontrol • Sağ-sol piston manuel hareketi (DK) • EC Güvenlik Direktiflerine uygun tasarım ve CE belgesi • Kullanım kılavuzu

Sąlyga: naujas, Pressure: 40 t Max. stroke: 300 mm Max. bending capacity – flat: 250 x 16 mm Working speed: 10 mm/sec Hfjdpouddfbefx Abmsr Control: NC Tool height: 250 mm Total power requirement: 4 kW Machine weight approx.: 1190 kg Space requirement approx.: 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press with a wide range of combination options. Whether it's tube bending, profile punching, or sheet cutting – with the appropriate accessories, the HP 40 is a multifunctional machine among presses. Standard equipment: - Ergonomic tool clamping table - Easy tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC control Highlights: - Control panel with digital display - Easy tool change - Hardened support pins - Hydraulic speed control The HP 40 is manufactured by a renowned Turkish manufacturer for our distribution brand "GERD WOLLF Maschinenfabrik." The images are for orientation purposes only and do not represent a true-to-scale depiction of the machine.

Sąlyga: paruoštas naudoti (naudotas), Maximum forming capacity over full length: 9 gauge (mild steel), approximately 3.8 mm; maximum forming length: 3200 mm; minimum flange height: 6 x material thickness; clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88 mm/s; bending speed: 1879.6 mm/s; bending angle range: 0°–180°. Dimensions (L/W/H): approx. 5160 mm / 2220 mm / 1780 mm; weight: approx. 5300 kg. Hedpfxjtia Hho Abmsfr

Sąlyga: naudotas, Section bending machine, bending machine, flat bar bender, horizontal bending/straightening press - Flat bar bender: hydraulic section bending machine - Base frame: on castors, table foldable on both sides - Modes of operation: manual and automatic - Accessories: see photos - Overall dimensions: 2155/1320/H1070 mm - Transport dimensions: 1320/840/H1245 mm Hfodpfxsh Tk Das Abmjr - Weight: 404 kg

Sąlyga: naudotas, Pressure / t Column gap / mm Stroke / mm This ram was dismantled from the MAE HY S 315s press. Technical data from the machine to which the ram belonged: Press force, downstroke: 315,000 kg Press force, upstroke: -- Ram stroke: 800 mm Hsdpfx Aen Uzbrebmefr Throat depth / Table depth: 720 mm Installation height: 800 mm Table width: 1200 mm Table height: 1200 mm Overall height / width / depth: 4200 mm / 2200 mm / 4350 mm Weight: 30 tons (machine body), as visible on the low-bed trailer: 4 tons Note: This listing is for the ram only!

Sąlyga: naudotas, Gamybos metai: 1990, Pressure 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double Column Straightening Press Model RZ - 205 / 3 - 600, Year of manufacture 1990, serial no. 86 596 _____ Upper ram pressing force 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of centres above table approx. 210 mm Ram speed down 0.17 mm/sec Ram speed up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / special equipment: Machine without automatic workpiece feed, parts (shaft-shaped) are manually inserted, acrylic glass sliding cover in front of the working area, manually operable Hjdpet Hw Amefx Abmsfr Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but has connection options for up to 7 measuring points. These can be adjusted lengthwise on the lower press table within a range of approx. 500 mm, the straightening punch can be adjusted on the upper ram via a prism guide. 2 tailstocks movable on the press table up to a max. clamping length of 600 mm, left side motor-driven and with clamping quill, right side with indexing disc. Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right for placing the workpiece The workpiece is measured at predefined positions and straightened accordingly, the straightening process is monitored and controlled by the measuring system, straightening stroke control for preset ram stroke. Left tailstock powered Original JENNY process control (FMS) in separate control cabinet with screen and keyboard, parameter input,

Sąlyga: geras (naudotas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Control: Siemens SIMATIC Panel Year of Manufacture: 1970 Hydraulic press suitable for the fabrication of large components such as dished heads, tanks, boilers, shipbuilding, and steel construction applications. Refurbished in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet. Installed height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Comprehensive die package with radii: 10/20/30/50/60/80/100 Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine pit depth: 2,350 mm Specifications Metric / US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (Estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Hfedokvmi Sspfx Abmsr Please Note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The details are provided in good faith, however, accuracy cannot be guaranteed. Accordingly, no assertions or contractual terms are implied. We recommend verifying all critical details independently.

Sąlyga: naujas, Pressure: 20 t Max. stroke: 200 mm Max. bending capacity - flat: 200 x 10 mm Working speed: 10 mm/sec Control: NC Tool height: 150 mm Total power requirement: 2.2 kW Machine weight: approx. 640 kg Space requirement: approx. 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press brake offering a wide range of combination possibilities. Whether it's tube bending, profile punching, or sheet metal cutting – with the appropriate accessories, the HP 20 is a multifunctional machine among presses. Standard equipment - Ergonomic tool clamping table - Easy tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC control Highlights - Control panel with digital display - Easy tool change - Hardened support pins - Hydraulic speed regulation Hfodotq Du Rspfx Abmsr The HD 180 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned Turkish manufacturer.

Sąlyga: labai geros būklės (naudotas), Pressure 6.3 t Reach 200 mm Stroke 200 mm Maximum installation height 500 mm Table clamping surface 450 x 420 mm Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.6 x 2.0 m Two-hand operation, various attachments Hfedpfxewuu A Ao Abmor

Gamybos metai: 1984, Sąlyga: naudotas, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective - Pneumatic-hydraulic press Hedpfx Abod Hp Tzemjfr - Stroke: 50 mm - Clear distance between columns: 850 mm - Table size: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1950, Sale exclusively within EU member states! No private sale. Hfodpfxspz Ht Ns Abmer MAE can be inspected by appointment. All warranty and guarantee rights are excluded. We assume no liability for the accuracy of the technical data or year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Sąlyga: naudotas, Gamybos metai: 1984, Pressure: 10 t Column clearance: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight approx.: 4,500 kg Required space approx.: m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model: ADS F 10 RH Year of manufacture: 1984 Serial No.: 5 002 84 00 Straightening force - upper ram pressing capacity: 10 t Retraction force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Hsdjt Hwwdopfx Abmofr Maximum height above table: 160 mm Clamping length of workpiece, approx.: 600 mm Maximum installation height: 600 mm Pump drive: 5.5 kW Total drive capacity: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control unit with monitor for fully automatic straightening cycle: load workpiece, measure the "bend", position workpiece at "maximum bend on top," straightening process, control measurement (and if required, re-straightening), eject workpiece. • Machine equipped with short workpiece feed via lifting beam; the workpiece is centered and clamped between pneumatic tailstocks and • currently features 3 straightening punches and 5 measuring points for a workpiece; 2 workpiece supports left and right as well as 1 pneumatically adjustable straightening anvil. • Straightening punches are actuated individually by pneumatic control, • Gripper for scrap parts that cannot be straightened, mounted at the rear Condition: good to very good – ready for demonstration soon Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please inquire with us.

Sąlyga: naujas, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DUAL SPEED AND RAPID ADVANCE, 20 TON CAPACITY Max Capacity: 20 tons Fast Approach Speed: 1,700 mm/min Working Speed (slow): 440 mm/min Cylinder Rod Stroke: 300 mm Cylinder Rod Diameter: 45 mm Rod End Diameter: M14 Tank Capacity: 30 liters Hfsdjrvz A Sspfx Abmjr Max Pressure: 350 bar Voltage: 400 V Frequency: 50-60 Hz Motor Power: 1.5 kW Max Absorbed Current: 3.8 A Weight: 200 kg

Sąlyga: naujas, Gamybos metai: 2019, Presiune: 400 t Hfsdpfxed Ttydj Abmsr Distanță între bare: 2500 mm Cursă: 600 mm Dimensiuni masă: 2500 x 2000 mm Distanță masă - partea inferioară a berbecului: 600 mm Necesar total de putere: 18 kW Viteză de avans: 9 mm/sec Viteză de retur: 19 mm/sec Capacitate pompă: 67 l/min Greutate totală aprox.: 26 t

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1970, Pressing force: 6 t Throat depth: 250 mm Stroke: 550 mm Table size: 650 x 500 mm Total power requirement: kW Hsdovpaadepfx Abmjfr Machine weight approx. 3.5 t Space requirement approx. 1.2 x 1.0 x 2.8 m

Sąlyga: geras (naudotas), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending and straightening press, profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press, horizontal bending machine Hedpfx Abjvgu Haomsfr -Hydraulic press: straightening system, straightening machine, profile straightening system with roller conveyor -Pressing force: 10 tons -Pressure: max. 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with straightening beam, 1,500 mm length - Press force: 50 tons - With semi-automatic control (99 programs, each with 16 steps) - Includes bending pin (without punch) - Includes tool holder for dies and foot pedal - Infinitely adjustable stroke range: 0–300 mm Hsdpfx Abedk H A Ismofr - Adjustable working speed Working stroke max. 10 mm/sec Return stroke 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table - Exchangeable wear plate - Weight: 1,300 kg - Bending capacities: Flat material: 300 x 15 mm Flat material (vertical): 60 x 15 mm Round tube: 3/8" – 2 1/2"

Sąlyga: naudotas, Gamybos metai: 1989, Sheet width: 150 mm Number of straightening rollers: 4 Number of feed rollers: 2 front + 2 rear Hfedpecxxvmjfx Abmer Roller diameter: 60 mm Space requirement approx.: 1.8 x 0.7 x 1.4 m

Sąlyga: naujas, Gamybos metai: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Integrated motor-driven power unit 400 V 50-60 Hz. - Rapid approach and return pump, preset to 20 bar. Hfedpfx Aefh R N Djbmjr - Adjustable pressure pump with handwheel to achieve the required force. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge allowing extremely precise adjustment of delivered force. The P110 MR is the only hydraulic press featuring two uprights made from monolithic FE 510 structure, laser-cut with no welded joints at the most stressed points. This feature provides extraordinary robustness. It is deformation-resistant and ensures tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 tons Rapid flow rate: 34 l/min Slow flow rate: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max current draw: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Sąlyga: naujas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0230, Pressure: 200 t Clearance between uprights: 1550 mm Stroke: 400 mm Dimensions (L x W x H): approx. 4400 x 3250 x 4100 mm Table size: 1500 x 1500 mm Distance table – bottom edge of ram: 1590 mm Return force: 20 t Total power requirement: 20 kW Hfsdpfx Absfxyklomjr Oil cooling electric max.: 1.5 kW Stroke speed: 25 mm/sec Descent speed: 10 mm/sec Oil tank: 250 l Table plate thickness: 120 mm Table cut-out, with spacer rings: 550, 450, 350 and 200 mm Table feed speed: 30 mm/sec

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t Hfodpfxjf Sqcko Abmor 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Gamybos metai: 2006, Sąlyga: naudotas, printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, die cutting machine, pneumatic die cutter -Manufacturer: Stommel & Voos, embossing press rail stamping machine mounted on a solid base frame -Type: SV700/6/PE/EF -Band width: 13 mm, convertible -Individual components: see photos Hfedpjkyy Ufjfx Abmor -Accessories: no further accessories included -Dimensions: 820/520/H1680 mm -Weight: approx. 154 kg

Sąlyga: naujas, mašinos/transporto priemonės numeris: DF0177, Pressure: 315 t Table length: 2500 mm Table width: 1800 mm Max. stroke: 800 mm Dimensions (L x W x H): 3910 x 4905 x 4169 mm Weight: 36 t Column diameter: 220 mm Drive power: 25 kW Adjustable working speed: 1 - 10 mm/sec Return speed: 1 - 25 mm/sec Oil tank: 450 l Hfjdpfx Ajfxyhiebmor Hydraulics and tank on top of the press: not included Maintenance balcony around the hydraulics: not included Side panels: not included Light barriers front and rear: not included Siemens S7 1200: included Siemens S7 1500: not included Double door at rear with monitoring: not included Monitored door on right side: not included Monitored door on left side: not included

Sąlyga: naujas, mašinos/transporto priemonės numeris: DF0178, Pressing force: 500 t Table length: 3,500 mm Table width: 3,500 mm Max. stroke: 3,600 mm Dimensions (L x W x H): 8,500 x 3,700 x 8,500 mm Return force: 50 t Hodpfsfxyh Ujx Abmjfr Weight: 250 t Upper tool inclinable: 180 degrees Table swivelling speed: max. 33 mm/sec Table extendable: 3,800 mm Moving table speed: 33 mm/sec Max. table load: 100 t Drive power: 65 kW Voltage: 400 V Control voltage: 24 kW Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Advance speed: 0 - 10 mm/sec Return speed: 0 - 25 mm/sec Rapid traverse speed: 0 - 10 mm/sec Oil tank: 800 l Ram height: 1,300 mm Table height: 700 mm Hydraulics and tank mounted on top of the press: included? Perimeter maintenance platform: included? Side paneling: included? Siemens S7 1500: included?

Sąlyga: naujas, Gamybos metai: 2019, Pressure: 275 t Column gap: 3000 mm Total power requirement: 30 kW Machine weight approx.: 40 t Return force: 27 t Max. pump capacity: Axial pump with proportional valve Bridge travel distance: 6000 mm Lateral travel range of the cylinder: max. 3000 mm Table size: 6000 x 3000 mm Table height above floor approx.: 700 mm Max. distance table to ram: 1100 mm Oil tank: 450 l Bridge travel speed (X and Y axes): 30-33 mm/sec Hfedpfxjfxyigj Abmor Cylinder lowering speed: 2-10 mm/sec Cylinder lifting speed: 2-50 mm/sec Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder traverses via servo motor and rack: 40 mm Control system Siemens: S7 1200 Monitor Siemens 9": touch panel Control desk: portable