Perforavimo staklės su pravažiavimu pirkti naudotą (60)

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports Guodpfxsidqf Ro Abmsk No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM throughfeed drilling machine 3. MORBIDELLI - ZENITH F2 CDM throughfeed drilling machine 4. MAHROS - BRUSH SF unloading system Machine connected - operates daily in a single shift. The first drilling unit features: Upper vertical heads - 3 units Lower vertical heads - 6 units Horizontal heads, left + right - 2 units Gusdpogb D Afsfx Abmjk The second drilling unit features: Upper vertical heads - 3 units Lower vertical heads - 6 units Horizontal heads, left + right - 2 units Rear horizontal heads - 6 units Below you will find detailed machine specifications and a video. It is possible to inspect the machine daily. The machine will be available in August 2021.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, I am selling a through-feed drilling machine HOMAG BST440/30/D, year of manufacture 1997. Configuration: 4+4 bottom-mounted drilling units Gedpfot Nddpsx Abmeuk 1+1 lateral drilling units with 24-spindle heads / 32 mm pitch 0 rear-mounted drilling units 2+2 top-mounted drilling units 4 material pressure units from above Very good condition. Available immediately.

Sąlyga: naudotas, Gamybos metai: 2018, veikimo valandos: 5 400 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-250-97-8163, HOMAG DRILLTEQ V-200 Optimat BHX055 Machining Center - Used - Machine purchased in December 2018 / Commissioned January 2019 Flow-through processing, Ball screws on all axes, Network card for remote service access, Scoring saw unit along X axis, Gusdpfx Abexpukgjmjk Pick-up type tool changer, Ite Dibow Hdh Es Ia Asn Integrated control cabinet ----- Technical Data ----- Min. workpiece length X: 200 mm, Min. workpiece width Y: 70 mm, Min. workpiece thickness: 8 mm, Max. workpiece length X: 3,050 mm, Max. workpiece width Y: 850 mm, Max. workpiece thickness: 56 mm, Machine control software: WOODWOP 8, Screen size: 24 inches, touchscreen, Main spindle motor power: 10 kW (S6), Main spindle speed: 1,250 - 24,000 rpm, Main spindle holder: HSK-F63, Drilling unit motor power: 2.3 kW, Number of vertical drilling spindles: 13, Number of horizontal double spindles X-axis: 2, Number of horizontal double spindles Y-axis: 1, Saw blade diameter: 100 mm, Number of tools in changer: 4, Vector speed (X-Y): 50 m/min. Quality information: - Complete basic cleaning - Checked electrics - Checked pneumatics

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Medžio skiedrų sijojimo sistema Gamintojas: Andritz Group Modelis: Konewood CS600 Sijojimo našumas: 400-675 m3/val Guedpfsxn T R Ajx Abmjk Pjuvenų ir drožlių sijojimas iš medžio skiedrų Konvejeriai. Plieninės konstrukcijos: – Plieno atraminės konstrukcijos sietams ir konvejeriams – Kopėčios ir praėjimai eksploatacijai ir techninei priežiūrai

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 2 500 mm, ruošinio plotis (maks.): 700 mm, sukimosi greitis (maks.): 2 800 aps./min, TECHNINĖ INFORMACIJA Minimalus plokštės ilgis: 170 mm Maksimalus plokštės ilgis: 2 500 mm Minimalus plokštės plotis: 50 mm Maksimalus plokštės plotis: 700 mm Gręžimo galvų pozicionavimas: NC Vertikaliam gręžimui skirtos ašys: 40 Horizontaliam gręžimui „Y“ kryptimi skirtos ašys: 6 Variklio galia: 3 kW Didžiausias apsisukimų skaičius: 2 800 aps./min. Vertikaliam gręžimui skirtos ašys: 4+4 Variklio galia: 2,2 kW Didžiausias apsisukimų skaičius: 2 780 aps./min. ĮRENGINIO DETALĖS Gjdexw U Arjpfx Abmeuk Purškiklių skaičius: 2 Talpyklų skaičius: 2 ĮRANGA Valdymo sistema: WINDOWS Mediniai kaiščiai Ø8 Pastaba: Įrankiai į pasiūlymą neįtraukti.

Sąlyga: labai geros būklės (naudotas), PC control: Power Control Software: TOPDRILL BST 500 No. 2 motorized through-feed conveyors No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports Godpfxeivawps Abmsuk No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 20

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Pažangi gręžimo apdirbimo centro, sukurta siekiant aukšto našumo ir tikslumo. Puikus pasirinkimas baldų gamintojams, leidžiantis pilnai apdirbti detales vienu darbo ciklu. Įrengta su TPA valdymu. Automatinis šešių pusių CNC gręžimo centras FUNKCIJOS IR ĮRANGA - 6 pusių gręžimas – visiškas vertikalus ir horizontalus apdirbimas vieno ciklo metu. - Gręžimo galvos: 9 viršutiniai vertikalūs grąžtai, 9 apatiniai vertikalūs grąžtai, 8 horizontalūs grąžtai (po 2 iš kiekvienos pusės). - TPA valdymas – intuityvus, su galimybe integruoti su CAD/CAM programine įranga. Godjxfrakjpfx Abmjuk - QR ir brūkšninių kodų skaitytuvas - Absoliutiniai enkoderiai – padėties tikslumo ir pakartojamumo garantija. - Automatinis įrankių keitimas TECHNINIAI DUOMENYS: Maksimalus ruošinio plotis: 1200 mm Ruošinio storis: 10–48 mm Minimalus ruošinio plotis: 50 mm Maksimalus ruošinio ilgis: 5000 mm Minimalus ruošinio ilgis: 250 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, I am selling a Rilesa Rapid 1500 through-feed drilling machine, year of manufacture 2012. Maximum working width: 1500 mm Gsdpfx Aet Rrn Eebmouk Configuration: 1+1 side-mounted motors 3 top-mounted motors Infeed magazine for elements. Return conveyor system that transports the elements back to the operator. Very good condition. Available immediately.

Sąlyga: naudotas, Gamybos metai: 2003, BIESSE FDT THROUGHFEED DRILLING MACHINE price: €20,000 / net Working area along X-axis: max 3200 mm min. 215 mm Workpiece thickness: max 65 mm min. 9 mm Work table height from floor: 900 mm 2 pcs horizontal heads, each with 2 drilling heads with 11 spindles, activated by a 1.1 kW (1.5 HP) motor. Each unit includes: • 2 drilling heads with 11 spindles each, equipped with quick-change system at 32mm pitch, without holders. Each head is powered by a 1.1 kW (1.5 HP) motor. • Quick manual positioning of the front heads (Y1) along a leadscrew rail using a hand crank for accurate adjustment. • Pneumatic stroke activation with scale, for manual setting of drilling depth. • Switch for manual stroke activation. • Pneumatic setting of drilling speed. • Maximum distance between the first and last spindle of the horizontal head: 704 mm • Maximum stroke of the horizontal head along the Z-axis: 5-40 mm 5 pcs lower vertical drilling head Width 96 mm, equipped with 2 motors (each 1.8 HP). Electronically activated drilling cycle. The head is equipped with: Guodpfx Abewpq Hmsmok • Quick-change device for drill heads with 90° rotation capability. • Rapid positioning of heads along the beam (X-axis) via rack-and-pinion rail with gear wheel and position-indicating encoder; 2 roller guides; mechanical locking, pneumatic release. • Quick positioning of each drilling head in the transverse direction (Y-axis) by ball screw and position-indicating encoder; 1 roller guide; mechanical locking – pneumatic release. • Electronic activation via brushless servomotor; drilling parameter control via NC.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Die Brema EKO 2.2 ist die neue, kompakte und vielseitige vertikale Bohrmaschine, die die Bearbeitung verschiedener Plattenformate und -stärken bei geringer Stellfläche ermöglicht. Sie ist die ideale Lösung für eine "Just-in-Time"-Produktion, auch bei komplexeren Fräsbearbeitungen. Höchste Maschinenindividualisierung entsprechend den Produktionsanforderungen Maximale Fertigungseffizienz durch Wegfall von Rüstzeiten Großes Spektrum bearbeitbarer Platten Brema EKO 2.2 – CNC-Bearbeitungszentrum für Platten X-Bearbeitungsbereich: 3200 mm Y-Bearbeitungsbereich: 1250 mm Bearbeitbare Platten (Mindest- und Maximalmaße) Maß MIN (mm) MAX (mm) Länge (X) 200 3200 Höhe (Y) 35 1250 Stärke (Z) 8 60 Max. bearbeitbares Plattengewicht: 50 kg (*) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 0,75 bei Platten bis L = 320 mm (°°) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 1,5 bei Platten L > 320 mm Bei Minimalplatten, die nur mit einer Greifer-Spannung gehalten werden, sind alle Bearbeitungsarten möglich – ausgenommen jene im Greifereingriffsbereich. Bei Bearbeitung auf Greiferhöhe kann ein Kippen des Werkstücks erforderlich sein. Alle Operationen sind im Einzelfall in Bezug auf Plattenmaße (insbesondere Mindestwerte), Materialart, Beschichtung und Bearbeitungsanforderungen zu prüfen. Arbeitsbereich der Werkzeuge (Mindest- und Maximalmaße, bezogen auf Werkzeugachse) X-Achse Operation MIN (mm) MAX (mm) Bohren 0 3200 Fräsen (mit Elektromotor-Spindel) 0 3200 (^) Nutenfräsen (mit Sägeblatt in X) 0 3200 (^) Y-Achse Operation MIN (mm) MAX (mm) Bohren 0 1250 Fräsen (mit Elektromotor-Spindel) 0 1250 Rf Nutenfräsen (mit Sägeblatt in X) 25 1250 Z-Achse Gusdpfx Abewnx Ivomok Operation MIN (mm) MAX (mm) Horizontale Bohrungen 0 35° Ru (^) Mit automatischer Greifer-Umpositionierung (°) Maximalmaß kann je nach Plattengröße und Greiferpositionierung reduziert sein.

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-250-87-6869, Gręžimo galvutė su 8 velenais (V8 SW/32) Gsdjvtyc Hspfx Abmouk Horizontali gręžimo galvutė su 4 velenais X kryptimi Horizontali gręžimo galvutė su 2 velenais Y kryptimi Pjūklas grioveliams D=100 mm (X kryptis) Stabdantis cilindras ruošinio pozicionavimui Ruošinio tvirtinimo sistema Ruošinio ilgis 2500 mm Ruošinio storis 12-60 mm WOODWOP mašinai WOODWOP IMPORT DXF BASIC (1 licencija)

Sąlyga: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min Guedpfjvnq Txjx Abmsk - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Sąlyga: naujas, Gamybos metai: 2024, Boring and Inserting Machines Rilesa Vlg 2200, new, March 2024 Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Startup Type: to be agreed Shipping Cost: Buyer Protection Delivery Terms: EXW (EX WORKS) – COLLECTION BY BUYER Category: Machine Tool Accessories in Poland Subcategory: Drill Bits Gsdpfx Absgbpmhomsuk Subcategory 2: Drilling Machines Description: DRILLING MACHINE WITH AN 8-SPINDLE MAGAZINE, TWO FRONT RIGHT AND LEFT, 3 TOP, AND 3 REAR. Year: 2024 The machine can be equipped with additional drilling heads; we are also a manufacturer of heads available in various spacings and with varying numbers of drilling spindles, tailored to individual requirements.

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), I am selling a drilling machine with milling units COMEC FM0V8 2000, year of manufacture 1997. Maximum working width: 2000 mm Configuration: - 0 motors from below - 1+1 motors from the sides / angle adjustable - 2 motors from behind / head angle adjustable Gedeh H S Hwopfx Abmjuk - 3 motors from above / head angle adjustable - 4 pcs. material hold-down clamps from above - 2 pcs. crosscut saws from above / head angle adjustable - Atypical 5-spindle drilling heads including 3 x 15mm / 2 x 25mm. - Dowel heads included in the price. Very good condition. Immediately available.

Sąlyga: labai geros būklės (naudotas), 6 vertical drilling units, each with two heads side heads, right and left spindle pitch: 32 mm Gusdpfx Aew Ad Tmebmsk maximum material length: 2250 mm magazine feed manual adjustment of lower head spacing heads rotatable by 90 degrees pneumatic upper clamps drilling depth adjustment

Sąlyga: naudotas, MPRO400GC-P230, CLECO, APEX TOOL GROUP hybrid screwdriving controller Guedpjq Umyvofx Abmjk Model: MPRO400GC-P230 Type: CLECO Condition: Used

Sąlyga: labai geros būklės (naudotas), Flexible CNC-Processing line for drilling, milling, and fitting of hardware. Numerical control system: "TPA Albatros." Comprising: Gjdpfx Ajhvagkobmsuk 1) "Igel" loader, with 12 positions (for 12 panels), vertical panel feed. 2) CNC-Boring machine, Pantograph model Over 25.13 with insertion unit (bushings, shelf supports, and base fittings). - 1 working head (approx. 5.5 kW) with turret (10 positions) - 1 drilling head with 24 independent spindles (X-axis) - 1 boring head with 2 independent spindles (Y-axis) - 1 drilling head with 5 independent spindles (Z-axis) - 1 hardware insertion unit (screwing) - 1 hardware insertion unit (press-fit) - 1 supply and feed hopper 3) Discharge unit (90° transfer) with motorized conveyor for vertical panel outfeed. 4) Discharge unit (0°-90°), with motorized conveyor for bringing the panel from vertical to horizontal position.

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), I am selling a throughfeed drilling machine BIESSE TECHNO FDT, year of manufacture 2004. Working area: X: 215 - 32,000 mm Y: max. 672 mm (horizontal spindle 24 units, 32 mm pitch) Z: Workpiece height: 9 - 65 mm Min. X distance between vertical heads: 96 mm Configuration: Gedpfei U Apmex Abmouk 4+4 motors from below 1 routing motor with pneumatic on/off stroke from below 1+1 side motors, 24 spindles / 32 mm pitch 0 motors from rear 4+4 motors from above 4 material pressure rollers from above Very good condition. Available immediately. Another BIESSE TECHNO FDT with different configuration available in a line. Price upon request.

Sąlyga: labai geros būklės (naudotas), two bottom drilling heads one side drilling head 21-spindle bars spindle pitch 32 mm motors 3x1.1 kW 2 pneumatic clamps Gsdpfxew Ad Tgs Abmouk adjustable head spacing left/right spindles

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports CNC controls movement (axes Y1 and Y2) of the drilling units Guodpfxjhvi Due Abmsk CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Gamybos metai: 2009, Sąlyga: labai geros būklės (naudotas), I am selling a HIRZT Livra/B through-feed CNC drilling machine, year of manufacture 2009. Maximum working width: 820 mm Configuration: 14 + 6 + 2 drilling spindles Return feed system, which returns the elements to the operator or allows them to pass through as in a through-feed machine. Overall dimensions: 2000 x 2000 mm (+800 +800 mm) Gsdpfjnxqdwox Abmouk Weight: 1,350 kg Comes complete with documentation and CE certification. Very good condition. Available immediately.

Sąlyga: labai geros būklės (naudotas), lower right head: 22 spindles / lower left: 22 / side: 21 left/right spindles spindle pitch: 32 mm 3 pneumatic clamps pneumatic unit positioning working area: 2400 x 1200 mm power supply: 380V Gusdpfxew Ad Tao Abmsk

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 Gusdpfx Aei D D Tfjbmok No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Sąlyga: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband Gedpjidmkrofx Abmouk KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)