Profilinio plieno žirklės 50–79 t išmušimo jėga pirkti naudotą (63)

Sąlyga: naudotas, Punching force: 550 kN (e.g., punches 30 mm holes in 16 mm thick material), with locating device triggered via foot switch for center punching Cuts 350 x 13 mm or 230 mm at the flat bar shear Throat depth: 305 mm Two separate foot switches for the punching and shearing stations, allowing independent punching and shearing operations Iedpfx Afot Exprowja Support table at the punching station A set of tools is included in the price

Sąlyga: geras (naudotas), Peddinghaus Combined Section Steel Shear Type 210/13 Isdpfx Afev D Nzyswoa See condition

Sąlyga: naudotas, Gamybos metai: 1996, Maximum punching force: 55 t Notching capacity: 10 mm Hole diameter/thickness: 40 x 10 mm Flat steel: 300 x 15 mm or 200 x 20 mm Angle steel 90°: 120 x 120 x 10 mm Angle steel 45°: 70 x 70 x 7 mm Round bar: 40 mm Square bar: 40 mm Strokes per minute with 20 mm stroke: 37 /min Isdewgkq Tepfx Afwja Throat depth: 250 mm Machine weight approx.: 1,800 kg

Sąlyga: naujas, Hydraulic - Profile Steel Shear LFSS Type HKM 60 - 5 Stations Includes MUBEA punch and die holder Includes Ringsland punch and die holder ::: PUNCHING ::: Diameter / Sheet thickness: Ø 28 mm / 15 mm, Ø 38 mm / 11 mm, Ø 110 mm / 3 mm Stroke: 55 mm Strokes (at 20 mm): 26 / min Throat depth: 220 mm Working height: 940 mm Ijdpfx Ajgiplnsfwoa ::: STEEL SHEAR ::: Round capacity: Ø 40 mm Square capacity: 35 mm ::: ANGLE SHEAR ::: Capacity at 90°: 120 x 120 x 12 mm Capacity at 45°: 80 x 8 mm Working height: 1140 mm ::: PLATE SHEAR ::: Capacity: 200 x 20 mm, Capacity: 300 x 15 mm, Cutting length: 317 mm Cutting with angle: 80 x 10 mm, Working height: 940 mm ::: NOTCHER ::: Thickness: 10 mm, Width: 42 mm, Depth: 100 mm Working height: 940 mm Capacity: 60 t, Motor power: 4 kW, Voltage: 400 V Weight: 1,440 kg Dimensions (LxWxH): 1520 x 950 x 1780 mm

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 2520, Round steel: 42 mm Square steel: 38 mm Angle steel: 90° 110x10 mm Isdpfx Ajcxxrpofwsa Flat steel: 150 x 16 mm Blade length: 250 mm Notching depth up to: 12 mm Notching device: L- and T-steel: 80 x 10 mm Punching unit: Press force: 50 t Stroke: 27 mm Punching unit: Capacity (diameter x thickness): 25 x 16 / 20 x 19 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.6 x 0.85 x 1.8 m

Sąlyga: geras (naudotas), Mubea Muhr und Bender profile steel shear Type: KBL 16 Dimensions: 200x75x197 cm (LxWxH) Iodpsncc Husfx Afwoa

Sąlyga: naudotas, Gamybos metai: 1990, Max. punching force: 600 kN Max. shearing force: 800 kN Punches 27 mm holes in 16 mm steel Shears up to 400 mm wide flat steel up to 16 mm thickness Hydraulic hold-down device on the flat bar shear Large support table on the punching side with stops Ijdpfxjtmyife Afwoa Further technical data available upon request Includes a selection of punches and dies as requested Weight: approx. 2,000 kg

Gamybos metai: 2022, Sąlyga: naujas, New hydraulic punching shear • 65 tons press force • Dual foot pedal with emergency stop • 2 independently operating cylinders Iedpfxjiinn Ij Afwsa • Punching • Quick-change system for dies • Cutting of angle steel, flat steel, round steel, and square steel • Notching

Sąlyga: geras (naudotas), Gamybos metai: 1998, perforavimo jėga: 70 t, bendras svoris: 2 400 kg, bendras ilgis: 2 100 mm, bendras plotis: 1 300 mm, bendras aukštis: 1 900 mm, Profile steel shear with punching and notching station, pressing force 70 tons, shearing capacity 450x15 mm, punching force 130 tons, punching capacity Ø 28x20 mm, punch throat depth 500 mm, punch table 1150x530 mm with stops, shearing length stop with trigger, 2 foot pedals, numerous punching tools; dimensions 1300x2100x1800 mm, approx. 2400 kg Isdpomig D Defx Afwea

Sąlyga: naudotas, Punching force: 750 kN (e.g., punches 30 mm holes in 22 mm material), with spotting device activated via foot switch Throat depth: 320 mm Cuts 450 x 15 mm or 300 x 20 mm at the flat bar shear Support table on the punching side Two separate foot switches for punching and shearing sides, enabling independent operation of punching and shearing A range of tools is included in the price Iodpfx Afjr R Auzewoa

Sąlyga: naudotas, Max. punching force: 700 kN Throat depth: 510 mm Cuts on the flat bar shear: 500 x 18 mm Ijdpfx Afjq Iyvvowoa Punches e.g. 30 mm diameter in 20 mm flat bar Quick-change device — set of tools included in price Weight: 3,000 kg

Sąlyga: naudotas, Max. punching force: 600 kN Max. shearing force: 1000 kN Iedpfx Ajq D E Tcjfwsa Punches 20 mm holes in 19 mm steel Shears up to 500 mm on the flat bar shear for material thickness up to 12 mm steel Further technical data available upon request Comes with a selection of punches and dies as required

Gamybos metai: 1990, Sąlyga: naudotas, Max. punching capacity: 600 kN Max. shearing capacity: 800 kN Punches 27 mm holes in 16 mm steel Shears flat steel up to 400 mm length and 16 mm material thickness Hydraulic hold-down on flat bar shear Further technical data available on request Ijdpjm T Amuefx Afwja Supplied with a selection of punches and dies as desired Weight: approx. 2,000 kg