Skirsnyje šlyties - kartu

Mubea HIW 550-305

Sąlyga: naudotas, Punching force: 550 kN (e.g., punches 30 mm holes in 16 mm thick material), with locating device triggered via foot switch for center punching Lasdpet Exprjfx Adgei Cuts 350 x 13 mm or 230 mm at the flat bar shear Throat depth: 305 mm Two separate foot switches for the punching and shearing stations, allowing independent punching and shearing operations Support table at the punching station A set of tools is included in the price

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface Laedpfx Ajrn Riqjdgji

Sąlyga: naudotas, Gamybos metai: 1996, Spindle diameter: 60 mm X-axis travel max.: 1000 mm – min.: 100 mm Y-axis travel max.: 1000 mm – min.: 100 mm Maximum drilling capacity in steel: 40 mm Maximum tapping capacity: M24 Lodpegvkkzefx Adgsai Material thickness max.: 60 mm – min.: 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Feed rate, infinitely adjustable, working feed: mm/min Feed force: 16 kN Tool taper: SK 40 Spindle stroke: 600 mm Positioning speed on all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Maximum table load: 500 kg Working height: 1,000 mm Machine weight approx.: 4.8 t Space requirement approx.: 3.5 x 3.3 x 3.1 m Control: Bosch CNC plate drilling system HMB PBM1000/60 – W12 for drilling end plates and base plates in steel construction, equipped with tool changer (12 positions) Number of drilling spindles: 1 pc. Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Sąlyga: naudotas, Gamybos metai: 1997, Heidenhain 355 valdymas x eiga: 850 mm y eiga: 550 mm z eiga: 450 mm Įrankio tvirtinimas: SK50 Mašinos svoris apie 5,5 t +++++ Atkreipkite dėmesį, kad staklės yra išardytos ir paruoštos pakrovimui. Dėl šios priežasties parodymas įjungtomis staklėmis ar vaizdo įrašo gamyba negalima. Ljdpfxod N Smhs Adgoai Be to, mūsų skelbime yra informatyviausios ir aukščiausios kokybės nuotraukos. Papildomų nuotraukų atsiuntimas, deja, neįmanomas. +++++

Gamybos metai: 2004, Sąlyga: naudotas, Cutting capacity at 90°: 90 mm Cutting capacity at 45°: 75 mm Saw blade diameter: 315 mm Lodpsd Ih Nkefx Adgeai Table size: 800 x 500/400 mm Saw blade bore: 30 mm Machine weight approx. 45 kg Dimensions: 850 x 600 x 430 mm

Sąlyga: naujas, Bernardo Lead and Feed Screw Lathe Master 180 including 3-axis digital readout Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 480 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 51 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range: (8) 70 – 2000 rpm Longitudinal Feed Range: (32) 0.052 – 1.392 mm/rev Cross Feed Range: (32) 0.014 – 0.380 mm/rev Metric Threads: (26) 0.4 – 7.0 mm Inch Threads: (34) 4 – 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT 4 Motor Output S1 100%: 1.5 kW (400 V) Motor Input S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1920 x 750 x 1600 mm Approximate Weight: 540 kg * Removable gap length: 225 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Travelling steady rest – max. passage diameter 50 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 320 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometric longitudinal stop • Thread chasing dial • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE standard) Ledpfx Adsd Du Tijgjai • Machine stand

Gamybos metai: 1962, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine No.: 1790 General / Technical Data: Hydraulic horizontal internal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically adjustable, stepless from 1 m/min to 7 m/min Return speed: hydraulically adjustable, stepless from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without working area) Power supply: 380 V / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special Features: Lasdsdl Uzkjpfx Adgsi • The machine is equipped with a universal pull head for flat shanks • Refrigerant / lubrication system • Without tool feeder • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for manufacturing keyway slots. On request, broaching needles and mandrels can also be supplied. The machine is connected and ready for demonstration under power in our warehouse.

Sąlyga: naudotas, x-travel: 600 mm y-travel: fixed mm z-travel: 650 mm Machine weight approx.: total 0.124 t Space requirement approx.: 0.7 x 1.0 x 1.05 m Surface measurement, test, and evaluation device for roughness and waviness parameters, with measuring stand and traverse unit, including recording unit with profile memory and fully digital measurement value processing, fully programmable. Evaluation according to different analysis programs with just one measurement cycle. Reference plane measurement on poorly aligned, curved, and inclined surfaces, automatic correction of height offset and inclination. Measurement programs are permanently stored and quickly retrievable. User-friendly control elements. Universally adaptable thanks to a pluggable program module for special functions. Lajdpfx Adecxxrgjgji Measuring stand PST-Se: large base plate made of black granite with one 14 mm T-slot, table 650 x 450 mm. Traverse unit PRK: adaptable precision long scanning device for roughness, waviness, and form measurement. Scanning length 1.5 - 60 mm, guiding accuracy 2 µm, scanning speed 0.5 and 0.1 mm/s, automatically adjustable, return speed 1.5 m/s. Standard, interval and end contact operation. Comprehensive accessories: exchangeable styli, stylus height adjustments, stylus holders, styli, etc.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2007, 1 unit used FULLY MOBILE CONCRETE BATCHING PLANT SBM / SIMEM SMM 100 Year of manufacture: 2007 Capacity: 100 m³/h Mixing unit Mixer: SIMEM MSO 3000/2000 Additive scale: 2 x 12.5 l Cement scale: 1200 kg Water scale: 600 l Aggregate bin unit Weighing belt: 5000 kg Aggregate / box compartments: 4 x approx. 38.5 m³ Cement silos: 4 x approx. 80 tons Control system: fully automatic Dorner Installed in a container Laodpfjvq Rxtjx Adgei Additive storage Installed in a container The plant is in technically well-maintained and fully functional condition. Location: Austria Availability: IMMEDIATE Price: on request All offers and prices are net ex-location. Subject to prior sale, errors and/or misrepresentations excepted. Sold without warranty or guarantee; sale in AS IS condition / as inspected, ex-situ (lying and/or standing).

Sąlyga: beveik kaip naujas (naudotas), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, stepless feed, 12–120 m/min. • Feed motor: 22.0 kW • 1st spindle below: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle below: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle below: 11.0 kW • All spindle motors with electronic brake • COMPLETELY NEW CUTTERHEAD SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm • 6 powered feed rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW Ledpfstynpxox Adgjai • Central lubrication points • NEW standalone control panel, 5 m cable • NEW standalone control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram included + Many NEW spare parts/accessories Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power connection: • Total connected load: approx. 157 kW Condition: Machine as shown in photos – technically as-new Payment: Payable in full by bank transfer prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Offers & inquiries only with complete company details Errors and prior sale excepted