Hidraulinės lakštinės žirklės, pjovimo storis 5–7 mm pirkti naudotą (188)

Sąlyga: geras (naudotas), Gamybos metai: 2013, Used 4-meter guillotine shear by Durma Model: SBT 4006 Year of manufacture: 2013 Capacity: 4100 x 6 mm Hsdpowmdppsfx Ad Depa Electric backgauge DT7 touch control Light barrier

Sąlyga: naudotas, Gamybos metai: 2000, Sheet width: 3060 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame gap: 3100 mm Hold-down clamps: 16 pcs Strokes: 20 strokes/min Oil capacity: 160 ltr Cutting angle: 1.6 ° Control: ELGO Operating hours: approx. 1,100 h Total power requirement: 11.0 kW Weight: 5250 kg Dimensions (LxWxH): 3800 x 1940 x 1560 mm From a maintenance workshop With only approx. 1,100 operating hours (!!) Equipment: - Electro-hydraulic swing-beam shear - ELGO NC control unit * for electric backgauge * Target/actual position value entry possible - NC electro-motorized backgauge Hpsdpfxexacfao Ad Dja * Backgauge travel (X): 750 mm * Backlash-free ball screw spindle for backgauge * Travel speed: 100 mm/sec - Electric cutting length limitation * Cutting length limitation increases strokes/min - Manual blade gap adjustment via eccentric - Jog mode with pushbuttons on left control panel - Front support plates with ball rollers - Front finger/hand guard - 1x side stop with T-slot & millimeter scale - 2x front support arms - Original operating manual including CE declaration

Gamybos metai: 1990, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 603, Working width: 3050 mm Sheet thickness: 6 mm Backgauge: 650 mm Drive power: 380 V, 16 kW Space requirement: 3680 x 2060 x 1870 mm Hsdpfjdzrpwex Ad Depa Weight: 7580 kg

Sąlyga: naudotas, Gamybos metai: 2001, plieno lakšto storis (maks.): 6 mm, galinis atmušas: 500 mm, pjovimo ilgis (maks.): 1 000 mm, Hydraulic guillotine shear Make: RABBA Model: HS 6/1000 Year: 2001 Technical Specifications Hpedpov I T N Nefx Ad Dja Manufacturer: RABBA Model: HS 6/1000 Year of manufacture: 2001 Working length: 1000 mm Sheet thickness: 6 mm Dimensions: L 1.50 x W 1.70 x H 1.60 m Weight: 1.6 t Equipment • Manual backgauge 500 mm • Angle stop All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Sąlyga: naudotas, Hydraulic Guillotine Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of Manufacture 1994 Cutting Length: 3100 mm Cutting Thickness: 6.35 mm Backgauge: 770 mm Working Height: 950 mm Hydraulic Sheet Hold-Downs: 17 units Hydraulic Tank Capacity: 150 liters Motor Power: 7.5 kW Power Supply: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with ELGO digital position display - Backgauge adjustment via pushbutton – quick traverse in both directions, fine adjustment by jogging (minus direction only) Hjdjtvb Iuspfx Ad Dspa - Sheet support device under the backgauge with pneumatic lift cylinder - Continuously adjustable blade gap from 0.1 mm, set via handwheel with analog display - Adjustable cutting angle in 5 steps from 1.5° to 3.5°, electrically preselectable - Left angle gauge 1500 mm - 2 table extensions for sheet support - Electric foot switch - Comprehensive operating manual Space requirement without front table extension (L x W x H): 4150 x 1850 x 1900 mm Space requirement with front table extension (L x W x H): 4150 x 2850 x 1900 mm Weight: 5.5 tons Good condition Excellent cutting results, also for thin sheets

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, AMADA PROMECAM GS 630 CNC ATSARGŲ NR. 01993 Hidraulinės žirklės su Amada valdymu Spaudimo galia 197kN. Eigos ilgis 160mm. Pjovimo ilgis 3.050mm. Maksimalus storis: 6mm paprastas plienas, 4mm nerūdijantis plienas. Pjovimo kampas 40°. Priekiniai ruošinio laikikliai apie 1.700mm ilgio. Pneumatinė galinio ruošinio laikymo sistema. Hpodpfx Adsxvbguo Doa Galinė elektroninė apsaugos sistema. Variklis 5,5kW. Serijos nr. C010603, pagaminimo metai (2006).

Sąlyga: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, bendras svoris: 4 500 kg, Hidraulinės guolotinės žirklės HACO GSX tipas Nauja mašina Siūlomas platus modelių asortimentas, tinkantis 2–4 m ilgio ir 6–13 mm storio lakštų apdirbimui. Su liečiamuoju skaitmeniniu SC200 valdikliu Riedėjimo rutuliukai ant lakšto stalo Papildomai: Lakšto laikymo sistema Lakšto gražinimo atgal sistema Atlenkiamas galinis atmušėjas Pirštų apsauga šviesos užtvara Lakšto spaudimo įtaisas su plastikiniais antgaliais Hedsxay U Espfx Ad Dspa Pilnas stalas su rutuliukais

Sąlyga: naudotas, Gamybos metai: 2009, Sheet width: 4050 mm Sheet thickness: 6.50 mm Sheet thickness for stainless steel: 4.00 mm Backgauge adjustable: 1000 mm Strokes per minute: 6 - 11 Working height: 880 mm Control: SC 70 Cutting angle: 0.5 - 3.0° Hold-downs: 23 units Motor power: 11.0 kW Machine weight: approx. 7500 kg Dimensions (L x W x H): 4950 x 1950 x 1720 mm Machine from a light metal (ALU) production line In good condition Including special accessories, e.g. sheet support device - In inspected condition - machine video - ?v=pv7RRijDXJA Equipment: - Electro-hydraulic, link-guided guillotine shear - HACO CNC control, model SC 70, pivoting front left * Pre-select positioning of the backgauge * Digital display of actual position value * Electro-hydraulic cutting angle adjustment * Electro-hydraulic blade clearance adjustment * Programmable backgauge retraction * Programmable cutting length limitation * Emergency stop switch - Electro-hydraulic blade clearance adjustment - Electro-hydraulic cutting angle adjustment - Electro-motorized backgauge, with ball screw spindles - Hydraulically acting hold-downs - Front finger guard Hjdjxaccrspfx Ad Dspa - Ball rollers in support table - 1x side gauge with mm scale - 1x movable foot switch - Rear safety guard - Original operating manual incl. CE declaration Special accessories included: - Pneumatic sheet support device for thin sheet cutting * For sheet thickness up to max. 4.0 mm * Optimum positioning of thin sheets

Gamybos metai: 1978, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11566, Working width: 4100 mm Sheet thickness: 6 mm Throat depth: 100 mm Hpsdpfsy Aurox Ad Dea Backgauge: 0 - 1000 mm Drive power: 18.5 kW Space requirements: 4600 x 2200 x 1950 mm Weight: 11,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, plieno lakšto storis (maks.): 6 mm, pjovimo ilgis (maks.): 3 050 mm, Įranga: pirštų apsauga, Hydraulic Guillotine Shear Make: EHT Model: TSS 6-30 Year: 2001 Technical Specifications Manufacturer: EHT Model: TSS 6 - 30 Year of manufacture: 2001 Working length: 3050 mm Sheet thickness: 6 mm Motor: 11 kW Oil capacity: 250 L Dimensions: L 3.70 x W 2.15 (plus backgauge arms 1 m, plus guard 0.6 m) x H 2.15 m Weight: approx. 8 t Hjdpfevkd Etex Ad Dopa Equipment • Angle gauge • 3 support arms • Motorized backgauge 10-1000 mm • Elgo P8721 control • Pneumatic hold-up device with scrap chute • Cutting line lighting • Rear safety guard via light barrier • Adjustable cutting length All details are without guarantee. A demonstration is possible at any time in our showroom.

Sąlyga: naudotas, Maks. pjovimo ilgis: 3100 mm Maks. skardos storis: 6 mm, kai 490 N/mm² Hedpfx Aow I Tu Njd Depa Variklinis galinis atmušėjas su skaitmeniniu ekranu Rankinis pjovimo tarpo reguliavimas Kintamai reguliuojamas pjovimo ilgis Pjovimo briaunos apšvietimas Nauji peiliai

Sąlyga: naujas, Sheet width: 2600 mm Sheet thickness: 8.0 mm Sheet thickness (stainless steel): 5.0 mm Hold-down devices: 12 pcs Strokes per minute: 18 spm Oil capacity: 200 ltr. Cutting angle: 1.5° Motor power: 15.0 kW Machine weight approx. 6,300 kg Dimensions (L x W x H): 3525 x 2350 x 1700 mm The manufacturer ERMAK offers you with its HGS series hydraulic swing beam shear a robust and durable machine for the economical processing of sheet metal. This compact all-round machine allows you to increase your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-effective cutting in your daily workflow. The use of hydraulic hold-down devices to secure the sheet and the support table with built-in ball rollers ensure ergonomic and efficient cutting for your operator. CNC control enables the use of different sheet types, already stored in the material library. After selecting the maximum thickness, the optimal blade gap is set automatically by electro-hydraulic CNC control, but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via the touchscreen. Additionally, the control system offers a memory for cutting programs and cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC touchscreen control * Including CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touchscreen controller, model "CybTouch 8" - Some functions of the CNC control: * Backgauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (for marking cut lines) … and much more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * Ball screw drive * Automatically swings up at maximum travel for longer cuts * Including selectable retract function (“Swing-Away function”) * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale Hodpfsxab D Ijx Ad Dopa - 2x front support arms, with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for marking cuts - Cutting line illumination with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety device) - Mobile foot switch - CE mark/declaration of conformity - Operating manual + circuit diagram + hydraulic diagram

Gamybos metai: 1987, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 687 T, Working width: 3050 mm Sheet thickness: 6 mm Throat depth: 200 mm Backgauge: 1000 mm Drive power: 15 kW Hpedpfx Adob N Erbs Doa Space requirement: 4100 x 2300 x 2100 mm Weight: 8500 kg

Sąlyga: naudotas, Gamybos metai: 1987, Sheet width: 3050 mm Sheet thickness: 6.0 mm Sheet thickness for stainless steel: 4.0 mm Cutting angle: 0.5 - 3.0° Hold-down clamps: 18 units Strokes: 9 / 14 strokes/min Backgauge - adjustable: max. 750 mm Control: conventional Motor power: 10.0 kW Weight: 4800 kg Dimensions (LxWxH): 3750 x 1600 x 2450 mm Well-maintained condition (!!) Equipment: - Electro-hydraulic / link-guided guillotine shear - Front operating panel, left side – easy to use - With electro-hydraulic cutting angle adjustment - With manual blade gap adjustment, accessible from the rear Hpedpfsxab Aqex Ad Dja - Electrically operated backgauge 10-750 mm - With analogue position display + handwheel for fine adjustment - 1x robust side gauge - 1x movable foot switch - Front finger/hand safety guard - 2x emergency stop buttons at front - Operating manual (PDF)

Sąlyga: naujas, Sheet width: 3100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame gap: 3100 mm Hold-down clamps: 14 units Strokes per minute: 18 strokes/min Oil capacity: 150 l Shear angle: 1.2° Control unit: CYBELEC CybTouch Total connected load: 11.0 kW Weight: 6300 kg Dimensions L x W x H: 4,000 x 2,100 x 1,640 mm With the hydraulic swing beam shear of the HGS model series, the manufacturer ERMAK offers a robust and durable machine for economical sheet metal processing. This compact all-round machine boosts your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-effective cuts during your daily workflow. Hydraulic hold-down devices fix the metal sheet securely, while the support table with integrated ball casters ensures ergonomic and efficient cutting for the operator. The CNC control allows you to select from different sheet types already stored in the material database. After choosing the maximum thickness, the optimal blade gap is set automatically via CNC electro-hydraulic adjustment, but can also be set manually. The position and retraction function of the motorized backgauge can be easily adjusted via touchscreen. Furthermore, the control stores cutting programs with sequences. ----- Robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touch screen control * including CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touch screen controller, model "CybTouch 8" - main CNC functions: Hjdpoxabzgefx Ad Dopa * backgauge preselection – X axis * blade gap adjustment * piece counter * cutting length limitation * material preselection, including sheet thickness * cutting line illumination (cutting to scribe line), and many more - motorized backgauge, travel range: 5.0 – 1,000 mm (X axis) * on ball screw spindles * automatically retractable at maximum travel, for longer cuts * including selectable retraction function ("swing-away function") * positioning accuracy: 0.1 mm * travel speed: 80 mm/sec. - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - ball casters integrated in the front support table - hinged finger safety guard with safety switch * finger guard with viewing windows for scribe line cutting - cutting line illumination with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - light curtain at the rear of the machine (safety device) - mobile foot switch - CE marking/conformity declaration - operating manual + electrical diagram + hydraulic diagram Included special equipment: - pneumatic sheet support for thin sheet cutting

Sąlyga: naujas, Sheet width 4100 mm Sheet thickness 10.0 mm Sheet thickness for stainless steel 6.0 mm Hold-downs 28 pieces Strokes 18 strokes/min Oil capacity 260 ltr. Cutting angle 0.5 - 2° Control CYBELEC Cybtouch Motor power 22.0 kW Backgauge - adjustable 1000 mm Dimensions (L-W-H) 6100 x 2580 x 2460 mm Weight 15,100 kg The manufacturer ERMAK offers with its hydraulically guided guillotine shear model series HVR a robust and durable machine for economical sheet metal processing. This compact all-rounder allows you to increase your productivity. The hydraulic guillotine shear model HVR supports you with precise, fast, and cost-efficient cutting in your daily workflow. The use of hydraulic hold-downs to secure the sheet and the support table with integrated ball rollers ensures ergonomic and efficient cutting for the operator. The CNC control enables the use of various types of sheet metal, which are already stored in the material library. After selecting the maximum thickness and material type, the optimal blade clearance and cutting angle are set automatically via the CNC control (electro-hydraulic adjustment), but can also be manually adjusted. The position and retract function of the motorized backgauge can be conveniently set via the touchscreen. Additionally, the control offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC guillotine shear, guided by guideways * including CYBELEC CNC touch screen controller * including CNC electro-hydraulic blade clearance adjustment * including CNC electro-hydraulic cutting angle adjustment ----- Equipment/features: - CNC electro-hydraulic guillotine shear, guideway/slideway guided - including CYBELEC CNC touch screen controller, model "CybTouch 8" - Some functions of the CNC control: * Backgauge preset (X axis) * Blade clearance adjustment * Piece counter * Cutting length limitation * Material selection including sheet thickness * Cut line illumination (cutting to scribed line) ...and many more - Motorized backgauge, travel 5.0 - 1,000 mm (X axis) * On ball screw spindle * Automatic swing-up at maximum travel for longer cuts * Includes selectable "Swing-Away" retract function * Positioning accuracy 0.1 mm Hpedpfx Adsxabwuj Dea * Approx. traverse speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Folding finger guard with safety switch * Finger guard with viewing windows for cutting to scribed line - Cut line lighting with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety device) - Mobile foot switch - CE marking/declaration of conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet metal support device for thin sheet cutting * Monoblock design

Sąlyga: naujas, Sheet width: 3100 mm Sheet thickness: 6.0 mm Frame width: 3,100 mm Hold-downs: 14 units Strokes: 16 - 24 strokes/min Oil capacity: 150 ltr. Cutting angle: 0.5 - 1.5° Sheet thickness (stainless steel): 4.0 mm Frame throat: 350 mm Motor power: 11.0 kW Machine weight: approx. 7,060 kg Dimensions (L-W-H): 4.1 x 2.2 x 2.19 m The manufacturer ERMAK offers, with its hydraulically-guided swing beam shear of the HVR series, a robust and durable machine for the economical processing of sheet metal. This compact all-round machine allows you to increase your productivity. The hydraulic guillotine shear, model HVR, supports you with precise, fast, and cost-efficient cuts in your daily workflow. By utilizing hydraulic hold-downs to secure the sheet and a support table with integrated ball rollers, ergonomic and efficient operation for your operator is ensured. The CNC control enables the selection of various sheet types, which are already available in the material library. After choosing the maximum thickness and material type, the optimal blade gap and cutting angle are automatically set electro-hydraulically via the CNC system but can also be adjusted manually. The position and retract function of the motorized backgauge are easily set via touchscreen. Additionally, the controller provides a memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam guillotine shear * Includes CYBELEC CNC touchscreen control * Includes CNC electro-hydraulic blade gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic swing beam guillotine shear - Including CYBELEC CNC touchscreen controller, model "CybTouch 8" Hsdpfxoxabcqo Ad Dspa - Selected CNC control functions: * Backgauge preselection - X axis * Blade gap adjustment * Piece counter * Cut length limiter * Material selection, including sheet thickness * Cut line illumination (cutting to scribe line) ...and many more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On ball screw spindles * Automatically folds up at maximum travel for longer cuts * Including selectable retract function ("Swing-Away Function") * Positioning accuracy 0.1 mm * Approx. travel speed 80 mm/sec - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in front sheet support table - Hinged finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cut line illumination with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at rear of machine (safety feature) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Sąlyga: naujas, Sheet width 4100 mm Sheet thickness 6.0 mm Sheet thickness (stainless steel) 4.0 mm Hold-down clamps 18 units Stroke rate 15 strokes/min Oil capacity 150 ltr. Cutting angle 1.2° Control system CYBELEC Cybtouch Backgauge – adjustable 1000 mm Working height 800 mm Motor power 11.0 kW Weight 8,100 kg Dimensions (L x W x H) 5000 x 2410 x 1650 mm The manufacturer ERMAK offers you with the HGS hydraulic swing beam shear a robust and durable machine for the economical processing of sheet metal. This compact all-rounder can help you enhance your productivity. The hydraulic swing beam shear model HGS supports you in precise, fast, and cost-efficient cutting in your daily workflow. The use of hydraulic hold-down clamps for securing the sheet and the support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control allows you to select various sheet types, which are already stored in the material library. After selecting the maximum thickness, the optimum blade gap is automatically adjusted electro-hydraulically by the CNC system, but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via touchscreen. In addition, the control offers storage for cutting programs, including cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC touchscreen controller * Including CNC electro-hydraulic blade gap adjustment ----- Hjdjxaa R Tjpfx Ad Dspa Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touchscreen controller, model "CybTouch 8" - Selected features of the CNC control: * Backgauge presetting – X axis * Blade gap adjustment * Piece counter * Cut length limitation * Material selection, including sheet thickness * Cut line illumination (cutting on scribe line) ...and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatic lift-up at maximum travel for longer cuts * Including selectable retract function ("Swing-Away Function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting along scribe lines - Cut line illumination with shadow marking - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety feature) - Mobile foot switch - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram

Sąlyga: naujas, Sheet width: 3100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Hold-downs: 14 units Strokes: 20 strokes/min Cutting angle: 1.2° Control system: CYBELEC CybTouch Working height: 800 mm Oil capacity: 150 ltr. Total power requirement: 11.0 kW Weight: 5500 kg Dimensions (LxWxH): 4,000 x 2,410 x 1,640 mm The manufacturer ERMAK offers you with the hydraulic swing beam shear HGS series a robust and durable machine for cost-effective sheet metal processing. This compact all-rounder increases your productivity. The hydraulic swing beam shear, model HGS, supports you with precise, fast, and cost-efficient cuts in your daily workflow. Hydraulic hold-downs for securing the sheet, along with the material support table with integrated ball rollers, ensure ergonomic and efficient cutting for your operator. The CNC control allows you to select various sheet types already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically adjusted via the CNC control electro-hydraulically, but can also be set manually. The position and retract function of the motorized backgauge can be adjusted easily via touchscreen. Moreover, the controller provides memory for cutting programs including cut sequences. ----- Robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touch screen control * including CNC electro-hydraulic cutting gap adjustment ----- Features: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touch screen controller, model "CybTouch 8" - Some functions of the CNC control include: * Backgauge preselection – X axis * Cutting gap adjustment * Piece counter Hpjdsxaa Rgjpfx Ad Dja * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribed line) .. and much more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * on ball screw spindles * Automatically swings up at maximum travel for longer cuts * including retract function selectable ("Swing-Away Function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in the front support table - Flip-up finger guard with safety switch * Finger guard with viewing window for cutting to scribed line - Cutting line illumination with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety feature) - Movable foot pedal - CE mark / Declaration of conformity - Operating manual + wiring diagram + hydraulic diagram

Sąlyga: naujas, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame width: 3,100 mm Hold-downs: 14 pieces Oil capacity: 150 ltr. Strokes: 18 strokes/min Cutting angle: 1.2° Control: CYBELEC CybTouch Total power requirement: 11.0 kW Weight: 6,300 kg Dimensions L-W-H: 4,000 x 2,100 x 1,640 mm The manufacturer ERMAK offers you with the hydraulic swing beam shear, model series HGS, a robust and durable machine for economical sheet metal processing. With this compact all-rounder, you can increase your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-effective cuts in your daily workflow. The use of hydraulic hold-downs for sheet fixation and the support table with integrated ball rollers ensure ergonomic and efficient cutting for your operator. The CNC control allows the use of various sheet types, which are already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically set electro-hydraulically by the CNC control, but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via touchscreen. Furthermore, the control offers a memory for cutting programs with sequence management. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC touch screen control * Including CNC electro-hydraulic cutting gap adjustment ----- Hpsdpfxjxaa D He Ad Doa Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC Touch Screen Controller, model “CybTouch 8” - Some functions of the CNC control: * Backgauge preselection – X axis * Cutting gap adjustment * Piece counter * Cut length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line), etc. - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * on ball screw spindles * automatically folding up at maximum travel, for longer cuts * including selectable retract function (“Swing-Away function”) * positioning accuracy 0.1 mm * travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in the front support table - Folding finger guard with safety switch * finger guard with viewing windows for scribed line cutting - Cutting line illumination with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Freely movable foot switch - CE mark/declaration of conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet support device for thin sheet metal cuts

Sąlyga: naudotas, Gamybos metai: 2021, Sheet width: 6020 mm Sheet thickness: 6.0 mm Sheet thickness for stainless steel: 4.0 mm Backgauge - adjustable max.: 1000 mm Working height: 1030 mm Strokes: 5 - 10 strokes/min Shear angle: 0.5 - 3.0 ° Hold-downs: 33 units Control: SC 100 T Motor power: 11.0 kW Machine weight: approx. 27,000 kg Dimensions (L-W-H): 7650 x 2400 x 2885 mm List price in 2021: ~ €160,000 Special price on request Equipment: - Robust electro-hydraulic guillotine shear * Design: link guide - HACO CNC control model SC 100 T, pivotable, front left * Control unit with LCD display * Pre-selection positioning for backgauge * Digital display of actual position * Electro-hydraulic adjustment of shear angle * Electro-hydraulic adjustment of blade gap * Programmable backgauge retraction * Programmable cut length limitation * Automatic and manual programming modes * Emergency stop switch - CNC electro-motorized material/backgauge * With ball screw spindles * Infinitely variable adjustment up to max. 1,000 mm - CNC electro-hydraulic blade gap adjustment - CNC electro-hydraulic shear angle adjustment - Hydraulically-actuated material/sheet hold-downs - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale Hpsdpfx Adjxaa Dgo Dea - 1x movable footswitch - Rear safety device (light barrier) - Operating manual (PDF) Special accessories included: - Sheet lifting device for cutting thin sheet metal * Optimal positioning for fine sheet metal

Sąlyga: naujas, Sheet width: 2100 mm Sheet thickness: 6.0 mm (ST 42) Sheet thickness for stainless steel: 4.0 mm (VA) Cutting angle: 1.2 degrees Strokes: 28 strokes/min Oil capacity: 150 liters Hold-down devices: 11 pcs Control: CYBELEC CybTouch Motor power: 11.0 kW Backgauge – adjustable: 1,000 mm Table height: 800 mm Weight: 4,500 kg Dimensions (L-W-H): 3,010 x 2,100 x 1,640 mm The manufacturer ERMAK offers you, with the HGS series hydraulic swing beam shear, a robust and durable machine for the efficient processing of sheet metal. With this compact all-round machine, you can increase your productivity. The HGS hydraulic swing beam shear supports you in precise, fast, and cost-effective cutting operations in your daily workflow. The use of hydraulic hold-downs to secure the sheet and the support table with integrated ball transfers ensure ergonomic and efficient cutting for your operator. The CNC control allows you to work with various sheet materials already preset in the material library. Once the maximum thickness is selected, the optimal blade gap is set automatically via the CNC electro-hydraulic control but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via the touchscreen. Additionally, the controller provides memory for cutting programs including cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * incl. CYBELEC CNC touch screen control Hpedpfx Asxaa Acod Dea * incl. CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - incl. CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected features of the CNC control: * Backgauge preselection – X-axis * Blade gap adjustment * Quantity setting * Cutting length limitation * Material selection, incl. sheet thickness * Cutting line illumination (cutting on scribed line) ... and much more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Running on precision ball screws * Automatic swing-up at maximum travel for long cuts * Incl. retract function selectable ("swing-away function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers in front support table - Folding finger guard with safety switch * Finger guard with sight windows for cutting to scribe - Cutting line illumination with shadow-vision - BOSCH/HOERBIGER hydraulic unit - SIEMENS electrical system - Light curtain at rear of the machine (safety device) - Free-moving foot switch - CE marking / Declaration of Conformity - Operating instructions + wiring diagram + hydraulic diagram

Sąlyga: naujas, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Frame width: 3,100 mm Hold-down clamps: 14 units Stroke rate: 16 - 24 strokes/min Oil capacity: 150 liters Cutting angle: 0.5 - 1.5° Sheet thickness for stainless steel: 4.0 mm Throat depth: 350 mm Motor power: 11.0 kW Machine weight approx. 7,060 kg Dimensions (L x W x H): 4,100 x 2,200 x 2,190 mm ERMAK offers you a robust and durable machine with the HVR model series hydraulic swing beam shear, ideally suited for the efficient processing of sheet metal. This compact all-round machine can help you increase your productivity. The HVR hydraulic guillotine shear supports you with precise, fast, and cost-effective cutting in your daily workflow. The use of hydraulic hold-downs to secure the sheet and the support table with integrated ball transfers ensures ergonomic and efficient cutting for your operator. The CNC controller allows the use of various sheet types stored in the material library. After selecting the maximum thickness & material type, the optimal blade gap & cutting angle are automatically set electro-hydraulically via CNC control, but can also be manually adjusted. The position and retract function of the motorized backgauge can be easily set via touchscreen. Additionally, the controller offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC guillotine shear "swing beam guided" * including CYBELEC CNC touchscreen controller * including CNC-controlled electro-hydraulic blade gap adjustment * including CNC-controlled electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Includes CYBELEC CNC touchscreen controller, model "CybTouch 8" - Some CNC controller functions: * Backgauge presetting - X axis * Blade gap adjustment * Piece counter Hpjdpfx Adexaag Ue Dsa * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (cutting to scribe line) ... and many more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * on ball screw spindles * automatically swings up at maximum travel for longer cuts * selectable retract function ("Swing-Away Function") * positioning accuracy 0.1 mm * approx. traverse speed 80 mm/sec. - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Swing-up finger guard with safety switch * Finger guard with viewing windows for scribed-line cutting - Cutting line lighting with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety feature) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram

Sąlyga: naudotas, Gamybos metai: 2007, Sheet width: 3050 mm Hpodpfsxaaghjx Ad Dja Sheet thickness: 6.35 mm Sheet thickness for stainless steel: 4.00 mm Sheet thickness for aluminium: 8.00 mm Hold-downs: 10 units Cutting angle: 0°40’ to 2°20’ degrees Distance between machine frames: 3340 mm Working height: 860 mm Table depth: 575 mm Control: GP 37W2 Strokes per minute: 13 - 33 Max. pressure: 315 bar Oil capacity: 100 litres Total power requirement: 6.0 kW Machine weight approx. 6030 + 1850 kg Well-maintained condition (!!) Current new price incl. accessories: approx. €110,000 Special price on request - Checked condition - Machine video - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control incl. information display * Main display with 4x operator panels * Operation/control of all functions * Up to 50 cutting programmes, each with 15 sequences - CNC electro-motorised backgauge * Travel speed up to 100 mm/sec - CNC electro-hydraulic adjustment of cutting angle - CNC electro-hydraulic blade clearance adjustment - Line lighting and sighting device to view scribe line (optical alignment) * Shearing according to optical marking - Manually adjustable table supports incl. ball transfers * Recessed handgrips in the front support table - 2x free-moving foot pedals - Operating manual and circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations & separate controls: * STATION 1 – AMADA conveyor belt with pneumatic sheet lifting device * STATION 2 – AMADA conveyor belt with pneumatic scrap diverter * STATION 3 – AMADA stacking device with scissor lift table - Wooden box with spare blades - 1x AMADA extra-long side gauge with support leg (length approx. 3,000 mm) - 2x AMADA extra-long front support arms

Sąlyga: naudotas, Gamybos metai: 2008, Sheet width 4100 mm Sheet thickness 6.0 mm Sheet thickness for stainless steel 4.0 mm Strokes per minute 12 - 24 SPM Cutting angle 1° 30' Working height 865 mm Backgauge - adjustable 1.0 - 1000 mm Hold-downs 20 pcs Control ENC 100 M Throat depth 50.0 mm Oil capacity 200 ltr Hedpfxew U U T Tj Ad Dopa Total connected load 15.0 kW Dimensions L-W-H 5230 x 2250 x 2150 mm Weight 11,460 kg Original price ~ 50,000 Euro (!!) Special price on request ----- NC electro-hydraulic swing beam shear * with DURMA "ENC 100 M" control unit * manual blade gap adjustment (eccentric) * incl. pneumatic sheet support for thin sheet cutting ----- Equipment: - Robust electro-hydraulic swing beam shear - Including DURMA "ENC 100M" NC control unit * Backgauge preselection – X axis * Counter preselection * Cutting length limitation * Swiveling control panel, front left - Monoblock welded steel construction made of high-quality steel - CNC electro-motorized backgauge * with ball screw and linear guides * automatic backgauge retraction during cutting process - Light barrier protection for rear access to the machine - Manual blade gap adjustment via eccentric - High-performance hydraulic cylinders made of SAM 1040 material - Hydraulic pistons, high-quality chrome-plated and finely honed - Split, foldable finger guard 1,000 mm - Easy sheet handling via ball transfer rollers in the table - 1x long side gauge incl. mm scale and stop dog - 3x front support arms - 1x freely moveable foot switch - Operating manual Special accessories included: - Pneumatic sheet support device for thin sheet cutting - For max. material thickness – ST ... 3.0 mm