Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6507 TECHNINIAI DUOMENYS LYGINIMO STAKLĖS: - veleno plotis: 510 mm - voleliai apatiniame stale - originali ketaus reguliuojama liniuotė su kampo reguliavimu - stalų ilgis: 1810 mm Hfsdpfx Abehv Shzsmjr - abu stalai reguliuojami STORIO PLANAVIMO STAKLĖS: - maksimalus apdirbamo elemento storis: 200 mm - veleno apsauga storio pjovimo agregate iš viršaus: - dantukai - įvedimo traukiantis velenas, dantytas - prispaudėjas - obliavimo velenas - prispaudėjas - išvedimo traukiantis velenas, lygus iš apačios: - 2 reguliuojami voleliai apatiniame stale - 2 ruošinio padavimo greičiai - pagrindinis variklis: 2,95 kW - matmenys ilgis/plotis/aukštis: 1940x1200x1120 mm - svoris: 970 kg Grynasis kaina: 13 900 PLN Grynasis kaina: 3 300 EUR Kaina apskaičiuota pagal kursą 4,2 PLN/EUR (esant didesniems kursų svyravimams, kaina gali keistis)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007,

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Darbinis plotis 230 mm Darbinis aukštis 160 mm Velenų skaičius 5 Velenų išdėstymas: 1. Apatinis 15 kW 2. Dešinysis 11 kW 3. Kairysis 11 kW 4. Viršutinis 15 kW 5. Apatinis 7,5 kW Velenų sukimosi greitis 6000 aps./min Veleno skersmuo 50 mm 3 traukimo volai ant darbo stalo Padavimo greitis reguliuojamas dažnio keitikliu iki 60 m/min Padavimas varomas kardaniniu velenu Pneumatiniai presai Techninė dokumentacija Hodpfjx Hzv Tex Abmofr Staklių matmenys 300x180x170 cm (A) Svoris 3500 kg

Sąlyga: naujas, Gamybos metai: 2025, SPECIFICATION: - The thicknesser table is made of cast iron and precisely ground, ensuring optimal glide of the workpiece. - Equipped with a helical cutterblock fitted with replaceable carbide tips, ensuring a significantly longer operating life compared to traditional straight-knife cutterblocks. - Three selectable feed rates available. - Knives can be easily changed thanks to the hinged extraction hood. - Efficient chain drive ensures accurate feed of the material, guiding and ejecting the workpiece precisely. - The thicknesser table enables machining accuracy up to 0.1 mm, assisted by a digital readout on the handwheel. - Knife adjustment screws allow quick, simple, and accurate setting of the blades on the cutterblock. - Comfortable operation thanks to an extraction and noise-reduction hood. - Standard delivery includes an extended table with built-in rollers. - Polished, ground cast iron thicknesser table enables processing of workpieces up to 230 mm in height. - Precise machining due to a table supported by a central column guide and additional reinforcement. Technical Data Planing width: 410 mm Planing height adjustment: 5–230 mm Cutterblock diameter: 95 mm Number of knives: 72 pcs Cutterblock speed: 4050 rpm Feed speed: 6 m/min Extraction port: ø100 mm Motor power: 4.2 kW Continuous motor power (S1 100%): 3.0 kW Hfodpox Dlp Aefx Abmsr Voltage: 400 V Extraction hood diameter: 100 mm Gross weight: 263 kg DIMENSIONS Width: 1110 mm Depth: 710 mm Height: 1020 mm Table size – width: 930 mm Table size – depth: 410 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 410 mm, obliavimo plotis: 410 mm, Obliavimo staklės, obliavimo staklės SCM F410 Specifikacija: • būklė – naudota, po techninės apžiūros • gamintojas – SCM Hfodpex E Srvofx Abmer • modelis – F410 • darbinis plotis – 410 mm • stalų ilgis – 2610 mm • reguliuojamas kampinis liniuotės sustabdymas • variklio galia – 4,0 kW • veleno apsisukimai – 5000 aps./min • drožlių storio indikatorius • maks. nuėmimo storis – 8 mm • veleno garso slopintuvai • variklio stabdis • 4 peilių velenas, skersmuo 120 mm tradiciniams peiliams • paleidimas: žvaigždė-trikampis • drožlių išsiurbimo jungtis – 150 mm • svoris – apie 650 kg • CE žymėjimas • matmenys: 261 x 90 x 110 cm (ilgis x plotis x aukštis) Papildoma informacija: • labai gera techninė būklė • nuotraukos atitinka parduodamo daikto būklę • galima įjungti ir patikrinti įrenginį vietoje.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 610 mm, obliavimo aukštis: 190 mm, peilių skaičius: 4, įvesties srovės tipas: trifazis, obliavimo peilių skaičius: 4, įėjimo įtampa: 400 V, ištraukimo jungties skersmuo: 150 mm, – vokiška gamyba – skirtas šlapiam medienai TECHNINIAI PARAMETRAI: – obliavimo plotis: 610 mm – obliavimo aukštis: 190 mm – variklių galia: 2 x 5,5 kW – 4 peilių velenai – keturi padavimo greičiai: 6 / 9 / 12 / 18 m/min – du dantyti viršutiniai traukiamieji velenai – vienas lygus viršutinis traukiamasis velenas Hodpfx Asxykn Aebmefr – du pagalbiniai velenai stalo paviršiuje – eilė atmetimo sklendžių – antgalio diametras: 150 mm – įrenginio matmenys (ilgis/plotis/aukštis): 160 / 140 / 170 cm – svoris: 1 500 kg

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7835 TECHNINIAI DUOMENYS - veleno plotis: 410 mm - triukšmą mažinantis šukas - peilių skaičius: 4 vnt. - stalų ilgis: 2500 mm - ketaus stalai - abu stalai reguliuojami - originalus kampu reguliuojamas liniuotė - variklis: 4 kW - elektrinis stabdis - ištraukimo jungties skersmuo: 125 mm - matmenys (ilgis/plotis/aukštis): 2500x820x1210 mm - svoris: 910 kg PRIVALUMAI – pagaminta Lenkijoje – viršutinis valdymo pultas – 4 peilių velenas – naudota obliavimo staklė Hsdox Armxjpfx Abmsfr – labai gera būklė Grynoji kaina: 15 900 PLN Grynoji kaina: 3 790 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant stipriems svyravimams)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2013, Leadermac Speedmac 631 Darbinis plotis: 310 mm, aukštis: 150 mm. Velenai: 6 x 50 mm (4 velenai su dažnio keitiklio greičio reguliavimu) Apatinis (22 kW) – 6000 aps./min., guolis išorėje Dešinysis (15 kW) – (4000–9000 aps./min.) tiesus oblius Kairysis (15 kW) – (4000–9000 aps./min.) tiesus oblius Viršutinis (22 kW) – 6000 aps./min., guolis išorėje Viršutinis (22 kW) – (4000–9000 aps./min.), guolis išorėje, tiesus oblius Apatinis (22 kW) – (4000–9000 aps./min.), guolis išorėje, tiesus oblius Padavimo greitis 60 m/min (galima padidinti). Hfsdpfx Aex Dq Rrebmer Viršutiniai padavimo volai 200 mm (pirmi 2), kiti – 140 mm Jungtis: 380 V / 50 Hz Pridėta pilna dokumentacija.

Sąlyga: labai geros būklės (naudotas), Tiektuvas keturpusiam obliavimo staklėms Sacot Hfodsx Hx H Njpfx Abmsr TECHNINIAI PARAMETRAI: Maks. ruošinio ilgis: 1700 mm Maks. ruošinio plotis: 230 mm Ruošinio aukštis: 70 mm 5 x ruošinio padavimo grandinės Atstumas tarp kraštinių griebtuvų: 1080 mm Įrenginio išmatavimai: 4500 × 2400 × 1800 mm (A) Konstrukcija: plieninė, pramoninė, sunki Valdymas: elektrinis + pneumatinis Tiektuvas puikiai tinka: lentpjūvėms, medienos apdirbimo gamykloms, gamybos linijoms, trumpų ir vidutinių detalių gamybai PLĖTROS GALIMYBĖS (pasirinktinai): pilna technologinė linija, apimanti: Weinig Hydromat 23c obliavimo stakles 60 m/min SACOT formatuotoją SACOT sukrautuvą

Sąlyga: naujas, Gamybos metai: 2025, The CORMAK TH410 thickness planer is a professional, industrial-grade woodworking machine designed for precise planing of timber with consistent repeatability and maximum accuracy. Equipped with a four-knife cutterhead, it ensures a high-quality finish on the workpiece in a single pass. Thanks to its robust construction, stable worktable, and adjustable feed speed, the CORMAK TH410 thickness planer is ideally suited for intensive production of solid wood and laminated components. Key Features of the CORMAK TH410 Thickness Planer: - Precision 4-knife cutterhead – guarantees excellent surface finish and efficient machining in a single pass. - Cast iron worktable – ground and polished for superb smoothness and precise material guidance. - Planing range 5–230 mm – allows processing of both thin boards and substantial structural elements. - Selectable feed speed – enables adaptation of working parameters to wood type and production requirements. - Digital height adjustment system – set accuracy up to 0.1 mm with a clear indicator on the handwheel. - Stable column-type guide – centrally supported table eliminates vibrations and ensures repeatable machining. - Safe and convenient operation – hinged extraction hood allows easy access to knives for quick replacement. Standard Equipment: - Four-knife cutterhead Hfsdpjx Dlabofx Abmor - Polished cast iron worktable - Extraction and noise-reducing hood - Table extensions with rollers - Digital height indicator - Full safety features compliant with occupational safety standards and technical documentation Optional Equipment: - Chip and dust extraction system - Transport trolley - Knife setting gauge Technical Specifications: Planing width: 410 mm Planing height adjustment: 5–230 mm Cutterhead diameter: 95 mm Number of knives: 4 pcs. Cutterhead speed: 4050 rpm Max. planing depth: 4 mm Feed speed: 6 m/min Extraction port: ø100 mm Total motor power: 4.2 kW Motor power S1 100%: 3.0 kW Voltage: 400 V Extraction port diameter: 100 mm Gross weight: 266 kg Dimensions: Width: 1110 mm Depth: 710 mm Height: 1020 mm Table size – width: 930 mm Table size – depth: 410 mm

Sąlyga: labai geros būklės (naudotas), KATALOGO NUMERIS 7616 TECHNINIAI DUOMENYS - Veleno plotis: 510 mm - 4 peilių velenas Hsdpfswbdn Uox Abmofr - Stalų ilgis: 2640 mm - Veleno apsauga - Ketiniai stalai - Abu stalai reguliuojami - Originalus ketinis kampu reguliuojamas liniuotės - Variklis: 4 kW - Nusiurbimo antgalio skersmuo: 160 mm - Matmenys (ilgis/plotis/aukštis): 2640x1000x980 mm - Svoris: 970 kg PRIVALUMAI – Vokiška gamyba – Dažais nepadengta – Ilgi stalai – Naudota lygiavamzdė – Labai gera būklė Kaina be PVM: 9900 PLN Kaina be PVM: 2350 EUR, pagal 4,2 EUR kursą (Kainos gali keistis dėl didesnių svyravimų)

Sąlyga: labai geros būklės (naudotas), SCM S520 Thickness Planer Hfedpox Hfg Njfx Abmer Working width: 520 mm Working height: 250 mm Feed speed adjustable: 4 steps Cutterblock with traditional knives 4-knife cutterblock Power: 4 kW Weight: 670 kg

Sąlyga: naujas, Gamybos metai: 2025, The width of the tables and the massive 410mm construction allow for machining large elements made of both soft and hard wood. The polished table and stable planer construction ensure quiet, vibration-free operation. - Switching from jointer to thickness planer mode is very quick and simple. It involves unlocking the eccentrics, raising the tables, and repositioning the chip extraction hood. Hodjvxh T Dspfx Abmefr - The thickness adjustment handwheel is located on the right side of the machine. - Aluminium tilting fence with a graduated rule allows precise angle setting in the range of 90–45°. - The thickness planer table is centrally mounted on a column and features a handwheel for up and down adjustment. - Planing height is measured by a rule with a scale. Technical data: Cutterhead diameter [mm]: 70 Cutterhead speed [rpm]: 5500 Dust extraction port diameter [mm]: 120 Tilting fence angle [°]: 0 – 45 Number of knives / dimensions: 3 / 410x25x3 mm Shaft diameter [mm]: 70 Max. jointer width [mm]: 410 Max. thicknessing width [mm]: 408 Max. planing height [mm]: 5–225 Max. planing depth (thicknesser) [mm]: 3.5 Max. planing depth (jointer) [mm]: 4 Thicknesser feed speed [m/min]: 7 Jointer table dimensions (L x W) [mm]: 1660 x 410 Gross weight [kg]: 330 Motor speed [rpm]: 2800 Motor power [kW]: 5.2 kW Power supply: 3 phase, 400V

Sąlyga: naudotas, Gamybos metai: 1993, Katalogo numeris 7705 TECHNINIAI DUOMENYS - maksimalus apdirbamos detalės plotis: 220 mm - maksimalus apdirbamos detalės aukštis: 160 mm - 4 velenai: 1) apatinis horizontalus 220 mm 5,5 kW 2) dešinysis vertikalus 160 mm 3) kairysis vertikalus 160 mm; (2 ir 3 velenų) 11 kW 4) viršutinis horizontalus 220 mm su elektriniu aukščio reguliavimu 7,5 kW - visi velenai reguliuojami aukštyn/žemyn, dešinėn/kairėn - velenų diametras: 40 mm - viršuje 4 įvyniojimo ritinėliai, dantyti, metaliniai Hfedpfew Edgfex Abmor - viršuje 1 dvigubas išvyniojimo ritinėlis, guminis - apačioje išvyniojimo ritinėlis, guminis - pavaros velenai su kardaniniu perdavimu - tolygus padavimo greičio reguliavimas - padavimo variklis: 2,2 kW - kėlimo variklis: 0,55 kW - elektrinis obliavimo storio reguliavimas - įvyniojimo stalo ilgis: 1970 mm - centrinis tepimas - ištraukimo pajungimo diametras: 3x120 mm, 140 mm - uždara kabinoje - matmenys ilgis/plotis/aukštis: 3500x1600x1500 mm - svoris: 1620 kg Grynasis kaina: 33 900 PLN Grynasis kaina: 8 070 EUR pagal 4,2 EUR kursą (Kainos gali kisti esant didesniems valiutos svyravimams)

Sąlyga: labai geros būklės (naudotas), Lentų krovimo įrenginys Sacot CA.SCA.PILA 1400 Profesionalus krovimo įrenginys, skirtas automatiniam lentų dėjimui į lygias, stabilias ir pakartojamas krūvas. Puikus sprendimas lentpjūvėms ir medienos apdirbimo įmonėms, ženkliai didinantis našumą ir darbo patogumą. TECHNINIAI PARAMETRAI Kraunamos medžiagos ilgis: 770–1400 mm Krovimo plotis: 1200 mm Krovimo aukštis: 1250 mm Įrenginio matmenys: 4600 × 3700 × 2600 mm (H) Pateikimas / nuėmimas: ritininis nuėmimo stalas Konstrukcija: plieninė, pramoninė, sunki Valdymas: elektrinis + pneumatinis Krovimo įrenginys puikiai tinka: lentpjūvėms, medienos apdirbimo fabrikams, gamybos linijoms, trumpų ir vidutinio ilgio elementų gamybai PLĖTIMO GALIMYBĖS (pasirinktinai): Pilna technologinė linija, kurią sudaro: Hedpfx Aex Hd Tbsbmofr Obliavimo staklės Weinig Hydromat 23c 60 m/min Formavimo įrenginys SACOT Krovimo įrenginys SACOT Žiūrėti visą aprašymą Pasiūlykite kainą Išsinuomokite lizingu

Sąlyga: naujas, Gamybos metai: 2025, Long, cast iron, polished and ground jointer tables made from grey cast iron ensure precision when carrying out planing tasks. A solid, durable, space-saving, and well-engineered design. High-quality products that make woodworking simply enjoyable. The PT310 model is equipped with a more powerful motor, enabling increased precision and faster processing. The Cormak planer-thicknesser is a robust and well-conceived construction that offers wide adjustment possibilities and mechanical processing of both hard and softwood. Adjustments are straightforward and switching from planer to thicknesser mode takes only a few seconds. The machine's weight of 250 kg, combined with cast, ground tables, ensures high stability for safe operation. Additional rubber feet eliminate vibrations during use. VERSION WITH THE MOST POWERFUL MOTOR ON THE MARKET with a total power output of 4.2 kW! The PT310 planer-thicknesser features an exceptionally powerful motor with a total rating of S6 4.2 kW (S1 3.0 kW)—significantly more than competing machines, resulting in higher performance and more stable operation. A stronger motor means stable operation and easy machining of hard materials: Hardwoods require more force to process, which this powerful motor handles with ease. Hfsdpfx Abevxh Rvemjr - Switching from jointer to thicknesser mode is very quick and simple. The process involves releasing the eccentrics, raising the tables, and moving the chip extraction cover. - The thickness adjustment handwheel is located on the right side of the machine. - An aluminum tilting fence with a scale bar allows precise angle setting between 90° and 45°. - The thicknesser table is centrally mounted on a column and features a handwheel for up and down adjustment. - Planing height is measured using a scale bar. Technical specifications: Cutter block diameter [mm]: 70 Cutter block speed [rpm]: 5500 Extraction port diameter [mm]: 120 Tilting fence angle [°]: 0 - 45 Number/dimension of knives: 3 / 310x25x3 mm Maximum planing width [mm]: 310 Maximum thicknessing width [mm]: 308 Maximum planing height [mm]: 5–225 Maximum thicknessing depth of cut [mm]: 2.5 Maximum planing depth of cut [mm]: 4 Thicknesser feed speed [m/min]: 6 Jointer table dimensions (L x W) [mm]: 1300 x 310 Gross weight [kg]: 250 Motor speed [rpm]: 2800 Motor power [kW]: S1 3.0 kW / S6 4.2 kW Power supply: 400V, 5-pin socket, 16A

Sąlyga: labai geros būklės (naudotas), Catalog No.: 7641 ADVANTAGES – The best wide planing machine for both wet and dry wood – Ideal for processing logs, floorboards, etc. – 3 planing shafts + 3 spindles – German manufacturing, KUPFERMUHLE brand – Used planer, in very good condition TECHNICAL DATA Max. planing width: 800 mm Max. planing height: 200 mm Top section: - Feed roller, toothed - Pawls - Pressure bar - 2 feed rollers, toothed - Pressure bar - 800 mm planing shaft, 4-knife, 7.5 kW - Pressure bars - 800 mm profiling shaft, 4-knife (3 straight knives installed, 1 profiling knife) - Pressure bar - Smooth outfeed roller Bottom section: - Guide bar - Infeed table Hsdpfxjwfti As Abmofr - Smooth feed roller - 800 mm planing shaft, 4-knife, 7.5 kW - 2 smooth feed rollers - Split smooth slip roller - Side pressure at outfeed Rear section: 2 side spindles + pressure bars: 1) Right vertical, 90 mm, 4 kW 2) Left vertical, 90 mm, 4 kW Spindle diameter: 35 mm Spindles alternately adjustable Spindles adjustable up/down, right/left 3) Additional horizontal bottom spindle, 350 mm, adjustable up/down and right/left, 5.5 kW Spindle diameter: 40 mm At outfeed: 4 upper metal slip rollers, 2 lower feed rollers, rubber Adjustable rollers in bottom table 6 feed speeds: 7 / 14 / 9 / 18 / 11.5 / 23 m/min Feed motor: 2.2 kW Extraction port diameters: 3×180, 130 mm Dimensions (L/W/H): 3100 × 2000 × 1900 mm Weight approx.: 3500 kg Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR exchange rate) (Prices may vary with rate fluctuations)

Sąlyga: naujas, Gamybos metai: 2025, The Cormak PT265 jointer-planer is a robust and well-engineered machine, offering extensive adjustment possibilities and the capability to process both hard and soft wood mechanically. Adjusting the planer is straightforward and switching between jointer and thicknesser modes takes just a few seconds. Latest machine version with an innovative table opening system: ❌ Competing machines of the older design use 'butterfly' tables. Before each operation, the infeed and outfeed tables must be recalibrated relative to each other. Even slight misalignments can cause material damage and undesired results. ✔️ The new interconnected table system allows for precise, simultaneous adjustment of both tables. Once set, the tables remain permanently calibrated. When changing the planing height, both tables move in sync. ✔️ This solution not only saves time and increases working comfort but also improves planing accuracy by up to 30% compared to older systems. This enhancement is particularly crucial when working with thinner materials. Hfodswu T S Aopfx Abmor Stable, vibration-resistant construction The machine’s substantial weight of 170 kg, combined with wide, ground cast iron tables (265 mm), ensures a high level of stability and safe operation. Additional rubber feet enable operation without any noticeable vibration. VERSION with the most powerful S6: 2.6 kW motor The PT265 jointer-planer features an exceptionally powerful S6 2.6 kW (S1 2.2 kW) motor—significantly exceeding what competitive models offer, resulting in enhanced performance and stable operation. A more powerful motor ensures stable operation and makes processing hardwoods effortless: Hard timber requires greater force for machining, which this robust motor handles with ease. Effortless mode change from jointer to thicknesser Switching from jointer to thicknesser mode is very quick and easy. It only requires unlocking the eccentrics, lifting the tables, and repositioning the chip extraction hood. High working precision - Smooth height adjustment of the tables with scale. - The thicknessing table is centrally column-supported and equipped with a handwheel for up and down adjustments. - Aluminum tilting fence (700x150 mm) with scale allows for precise angle setting from 90 to 45 degrees. Technical specifications: Knife shaft diameter [mm]: 75 Knife shaft speed [rpm]: 4000 Suction port diameter [mm]: 100 Tilting fence angle [°]: 90 - 45 Number of knives: 3 Shaft length [mm]: 262 Knife dimensions [mm]: 250x30x3 Max. planing width (jointer) [mm]: 265 Max. planing width (thicknesser) [mm]: 265 Max. planing height [mm]: 180 Max. planing depth (thicknesser) [mm]: 3 Max. planing depth (jointer) [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power: S6: 2.6 kW Power supply: 230V

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7556 Technical Specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal 240 mm, 5.5 kW 2) Right vertical 160 mm, 5.5 kW 3) Left vertical 160 mm, 5.5 kW 4) Top horizontal 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm Top side: - 6 powered infeed rollers, toothed, including 2 double rollers - 2 powered outfeed rollers, smooth rubber Bottom side: - Side pressure before and after the roller in the bottom table - Powered, toothed, swivel infeed roller in lower table before the first spindle - 2 pneumatic side pressure units - Powered metal outfeed roller, smooth - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table height adjustable - Central lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Variable feed speed via inverter: 6-30 m/min - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed cabin - Extraction port diameters: 4x150 mm - Dimensions (LxWxH): 3750x1750x1800 mm - Weight: 3300 kg ADVANTAGES - Equipped with 4 heads - Ideal for wet and dry wood - Used machine, in perfect condition Hjdpfx Asvyzn Rjbmofr Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Sąlyga: naujas, Gamybos metai: 2025, The Cormak PT265 Planer-Thicknesser is a robust and well-engineered machine, offering extensive adjustment capabilities and mechanical processing of both hardwood and softwood. The adjustment itself is simple, and converting the planer to thicknessing operation takes just a few seconds. Hfjdpfjvxhznjx Abmor Latest machine version with an innovative table opening system: ❌ Competing machines of the old type are fitted with “butterfly” tables. Before each job, the infeed and outfeed tables need to be recalibrated. Even small discrepancies between them lead to material damage and undesirable effects. ✔️ The new integrated table solution allows precise adjustment of both tables simultaneously! Once set, the tables remain permanently calibrated. When adjusting the planing height, both tables move in unison. ✔️ This innovation not only saves time and makes the machine more convenient to use, but also increases planing precision by 30% compared to previous systems. This is particularly important for working with thinner materials. Stable, vibration-resistant construction The machine’s weight of up to 170 kg, combined with wide, 265 mm precision-ground cast iron tables, ensures high stability and safe operation. Additional rubber feet ensure operation is virtually vibration-free. VERSION with the most powerful motor: S6 2.6 kW total output The PT265 Planer-Thicknesser stands out with its exceptionally powerful S6-rated 2.6 kW motor (2.2 kW S1). This is significantly more than most competitor machines, resulting in higher performance and stable operation. A more powerful motor means smooth operation and effortless processing of hard materials: Hardwoods require greater force to machine. The powerful motor handles this with ease. Effortless changeover from jointer to thicknesser. Switching from jointer to thicknesser mode is quick and straightforward—simply release the eccentrics, raise the tables, and reposition the chip extraction cover. Precision working. - Smooth height adjustment of tables with a scale. - Thicknesser table is centrally mounted on a column and features an adjustment handwheel. - Aluminum tilting fence (700x150 mm) with scale strip for precise adjustment between 90-45 degrees. Technical data: Cutterhead diameter [mm]: 75 Cutterhead speed [rpm]: 4000 Extraction port diameter [mm]: 100 Tilting fence angle [°]: 0 - 45 Number of knives: 3 Cutterhead length [mm]: 262 Knife dimensions [mm]: 2500x300x30 Maximum planing width [mm]: 265 Maximum thicknessing width [mm]: 265 Maximum planing height [mm]: 180 Maximum thicknessing depth of cut [mm]: 3 Maximum planing depth of cut [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimension [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power S6: 2.6 kW Power supply: 400V

Sąlyga: labai geros būklės (naudotas), Catalogue number 6338 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 160 mm 7 spindles: 1) Lower horizontal 230 mm, 5.5 kW 2) Right vertical 160 mm, 5.5 kW 3) Left vertical 160 mm, 5.5 kW 4) Upper horizontal 230 mm, 7.5 kW 5) Upper horizontal 230 mm, 7.5 kW 6) Lower horizontal 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - All spindles equipped with brakes - Spindle speed: 6000 rpm From above: - 6 feed rollers, toothed, metal, including 2 double rollers - 4 outfeed rollers, rubber, including 1 double roller - 3 outfeed pressure units From below: - Lateral pressure at infeed - Infeed roller, toothed, driven, swivelling in bottom table - 3 feed rollers, metal, smooth - Pneumatically adjustable rollers - Infeed table length: 1190 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6-24 m/min - Feed motor: 3.7 kW - Feed shafts driven by cardan shafts - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L/W/H): 5100 x 2070 x 1900 mm - Weight: approx. 5000 kg Hfsdpfxjhp N R Is Abmsr ADVANTAGES – 7-head machine – Universal spindle – Ideal for wet and dry wood – Spindles fitted with brakes - Technical documentation (DTR) – Used planer, very good condition Net price: 149,900 PLN Net price: 35,690 EUR (depending on the exchange rate 4.2 EUR) (Prices may vary in case of significant exchange rate fluctuations)

Sąlyga: naujas, Gamybos metai: 2025, A planer-thicknesser is a versatile woodworking machine, designed for straightening, dimensioning, and smoothing lumber. Ideal for joinery and furniture manufacturing applications, it allows for precise planing, surface finishing, edge processing, production of boards, fabrication of joinery components, and preparation of timber for gluing. The machine features a robust cast iron table, high-quality cutterhead knives for material removal, an electric motor, and adjustable settings for ease of use. Applications The CORMAK PT260 230V planer-thicknesser is the perfect solution for: - Joiners and carpentry workshops producing wooden structures, furniture components, and mouldings - Renovation and construction workshops processing raw sawn timber and laminated wood - Hobby workshops seeking an accurate thickness planer for domestic use - Schools and training centers teaching woodworking fundamentals on professional-grade equipment Standard Equipment - Cutterhead Ø75 mm with 3 knives (250 × 30 × 3 mm) - Planer table: 1100 × 250 mm - Thicknessing table: 600 × 248 mm - Adjustable aluminium fence: 700 × 150 mm (90–45°) - Anti-vibration rubber feet Hfjdpfxow H R Aij Abmsr - Dust extraction port Ø100 mm - Operating manual (Polish) - CE Declaration of Conformity Optional Equipment - Mortising and drilling attachment - Chip and sawdust extractor - Knife setting jig - Roller support stands Upgrade your workshop with modernity, precision, and reliability—choose the CORMAK PT260 230V planer-thicknesser NEW VERSION to streamline your woodworking operations. Technical Specifications Cutterhead diameter [mm]: 75 Cutterhead speed [rpm]: 4000 Dust extraction port diameter [mm]: 100 Fence tilt angle [°]: 90–45 Number of knives: 3 Knife dimensions [mm]: 250x30x3 Planer table size [mm]: 1100x250 Thicknesser table size [mm]: 600x248 Max. planing width [mm]: 250 Max. planing thickness, surface planer [mm]: 5 Max. planing thickness, thicknesser [mm]: 2.5 Max. cutting depth, thicknesser [mm]: 3 Max. stock height, thicknesser [mm]: 180 Feed speed, thicknesser [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1100 x 250 Weight [kg]: 170 Total motor power: S1: 2.0 kW / S6: 2.6 kW Power supply: 230V Manual: Polish / English CE Declaration: Yes Manufacturer: Cormak

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7832 TECHNINIAI DUOMENYS - Veleno plotis: 640 mm - Peilių kiekis: 4 vnt Hfodpfx Aboxzhxnomsr - Maksimali apdirbamo elemento storis: 300 mm - Skaitmeninis obliavimo storio ekranas – Iš viršaus: - Išmetimo įtaisai - Sekvencinis padavimo velenas - Obliavimo velenas - 2 lygūs, traukiantys, metaliniai išvedimo velenai – Iš apačios: - 2 reguliuojami volai apatiniame stale - Stalas su 4 varžtais - Variklis: 7,5 kW - Stabdys - Elektrinis stalo pakėlimas - 2 padavimo greičiai: 7/14 m/min - Padavimo variklis: 0,75/1,1 kW - Nusiurbimo antgalio skersmuo: 160 mm - Matmenys (ilgis/plotis/aukštis): 1540 x 1220 x 1230 mm - Svoris: 1300 kg PRIVALUMAI – Pagaminta Lenkijoje – Elektrinis stalo pakėlimas – Segmentinis padavimo velenas – Naudota storio obliavimo staklė, labai gera būklė Grynoji kaina: 32 900 PLN Grynoji kaina: 7 840 EUR, pagal kursą 4,2 EUR (Kainos gali keistis esant didesnėms kursų svyravimams)

Sąlyga: naujas, Gamybos metai: 2025, A planer-thicknesser is a versatile woodworking machine that enables leveling, sizing, and smoothing of timber. Ideal for carpentry and furniture manufacturing, it provides precise planing, surface finishing, edge-processing, board production, manufacturing of joinery elements, and preparation of glue-ready materials. This robust machine features a high-quality cast iron table, material removal knives, an electric motor, and adjustable controls, ensuring user-friendly operation. The planer-thicknesser, also known as a jointer, is designed for the initial processing of both rough and solid wood, as well as softwood (lumber). Its primary function is to flatten, size, and smooth timber using mechanical processes. This tool is particularly useful in woodworking and furniture production, where precision and repeatability are essential. Heavy-duty construction with increased mass for vibration resistance With a machine weight of 170 kg and wide, ground cast iron tables (250 mm), it guarantees high stability for safe operation. Additional rubber feet provide virtually vibration-free performance. VERSION with the most powerful motor, total power S6: 2.6 kW The PT260 planer-thicknesser stands out for its exceptionally powerful S6 2.6 kW (S1 2.0 kW) motor—significantly more robust than competing machines, resulting in higher performance and operational stability. A more powerful motor delivers stable operations and facilitates the machining of hard materials: hardwood processing requires higher force, which the powerful motor handles effortlessly. Effortless conversion from jointer to thicknesser Switching from jointer to thicknesser mode is fast and simple: just unlock the eccentrics, raise the tables, and reposition the dust extraction hood. Working precision - Stepless table height adjustment with scale. Hfedpfx Ajwt Axpebmer - Centrally mounted thicknessing table on a column with a handwheel for up-down adjustments. - 700x150 mm aluminum swing fence with a scale strip, enabling precise angular adjustment within a 90-45 degree range. Technical data: Cutterblock diameter [mm]: 75 Cutterblock speed [rpm]: 4,000 Suction port diameter [mm]: 100 Swing fence tilt angle [°]: 90 - 45 Number of knives: 3 Knife dimensions [mm]: 250x30x3 Table dimensions [mm]: 1,100 x 250 Thicknesser table [mm]: 600 x 248 Max. planing (jointer) width [mm]: 250 Max. planing thickness (planer) [mm]: 5 Max. thicknessing depth per pass [mm]: 2.5 Max. cutting depth (thicknesser) [mm]: 3 Max. thicknesser working height [mm]: 180 Thicknesser feed speed [m/min]: 6 Fence size [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1,100 x 250 Weight [kg]: 170 Total motor power: S1 2.0 kW | S6: 2.6 kW Power supply: 400V

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7822 Technical data: - shaft width: 410 mm - 4-knife shaft - max workpiece thickness on thicknesser: 200 mm - max workpiece thickness on side heads, 3-sided: 110 mm – from above: - pawls - infeed pulling shaft, toothed - pressure unit - planing shaft - pressure unit - 2 outfeed pulling rollers, smooth - pressure unit – from below: 3 adjustable rollers in the bottom table – from the rear: Hfjdpfx Aboxyki Hemsr - 2 side spindles - spindle height: 110 mm - spindle diameter: 30 mm - spindles adjustable up/down, right/left - side spindle motors: 2x4 kW - main motor: 4 kW - 3 feed speeds: 0.12; 0.19; 0.30 m/s - feed motor: 0.75 kW - lifting motor: 0.75 kW - extraction port: 3x120 mm - overall dimensions (LxWxH): 2050x1300x1500 mm - weight: 1200 kg ADVANTAGES – made in Poland – very good condition – electric table lifting – DTR technical documentation included – used planer/thicknesser Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant currency fluctuations)