Lengvojo metalo / aliuminio diskiniai pjūklai – visiškai automatiniai pirkti naudotą (81)

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees: round 120 mm Pgedpfx Aefg Rlgehcst Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120/110 mm Cutting capacity at 45 degrees: square 10/95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, designed for sawing aluminium and light metal alloys using carbide-tipped circular saw blades. The machine is capable of mitre cuts from 45° right to 45° left. By adjusting the vertical orientation, it is possible to perform cutting operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw equipped with a new Windows CE-based control unit, specifically developed by MEP for automatic machines.

Būklė: naujas, Gamybos metai: 2026, slėgis: 8 juosta, Bevel Adjustment Horizontal 15°–90°15°, stepless Saw Motor 5.50 kW (400 Volt) Saw Blade 600 mm Travel Range Rear Fence 180 mm Working Height 940 to 1000 mm, adjustable via feet 2 x extraction nozzles (top in hood & bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary Table made of ground nickel steel Saw head with linear recirculating ball guides, manufactured with high precision, long service life, and high rigidity. Saw material can be pre-clamped under low pressure with the hood open. Hydropneumatic blade feed Chip flow towards extraction hood. Features • Precision under-table circular saw • Mitre adjustment 0°/45°/90°/–45°/–60°, stepless • Includes 2 pneumatic vertical clamps • Blade feed steplessly adjustable • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system Othgf • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm Hxdcvds7y • Saw blade 600 mm • Saw blade not included in delivery! Our NC pusher system ensures that your workpieces are positioned precisely at the desired processing position on our UK 600 HA 90°. A gripper clamp holds the material and the NC control positions the material automatically. Subsequently, the clamping and sawing process is triggered. The positions are pre-programmed in the controller. Once the machine tool has finished processing, the system automatically moves to the next sawing position. Depending on the workpiece, multiple parts can be clamped and positioned simultaneously either stacked or side by side. You are welcome to inspect the desired machine at any time in our production/showroom. Please feel free to contact us. We look forward to your message! Plantec Maschinen GmbH Pgodpogwt S Tofx Ahcjt

Būklė: naujas, Saw blade diameter 350 x 32 mm Pjdjxaa Uxopfx Ahcjgt Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100 x 100 / 95 x 95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed 1700 / 3400 rpm Control MEP CNC Total connected load 2.6 / 3.5 kW Machine weight approx. 605 kg Dimensions (L x W x H) 2210 x 1680 x 2150 mm Equipment: - CNC fully automatic high-performance circular saw * for mitre cuts from 45° right to 45° left * for aluminium and light alloy materials - MEP microprocessor control * Windows 'CE' based system * user-friendly interface * storage for up to 100 cutting programs * user interface with 7” touch screen display & mechanical buttons * pivoting control panel * display and entry of alarm and error messages * positioning of the saw head and movement of the feeder via joystick * automatic detection of the cutting start position - material feed via stepper motor and precision ball screw * with 600 mm stroke * repeatable for cutting any length - manually operated safety hood - mechanical stops at -45°, 0°, +45° * facilitate quick positioning of the saw head - pneumatic vice system * 2x pneumatic front vices * including vertical vice - heavy-duty cast iron construction for vibration-free operation & maximum precision - saw head can also be tilted up to 45° - 2x sawing speeds - machine base with lockable door - coolant system (emulsion oil lubrication) - machine base with forklift pockets - comprehensive operator and maintenance manual, etc.

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK-600-A is an "upcut" machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a certain extent). The machine is characterized by its user-friendly operation, fast and convenient material change, as well as easy mitre angle adjustment. The UK-600 A features a steplessly adjustable mitre range to the left and right up to 20° (swivel range twice 70°). The saw feed operates automatically at the push of a button, and the material is clamped by two pneumatically controlled vertical and horizontal clamping cylinders each. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic lift for the safety guard! Equipment • Precision under-table circular saw • Infinitely adjustable mitre settings at 0º/ 45º/ 90º/ -45º / -60º Pgsdpfx Asgwt S Eehcjt • Includes 2 pneumatic vertical clamps • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device - chip extraction system • Spray mist system for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade diameter 600 mm Our NC pusher system ensures your workpieces are positioned precisely at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, while the NC control system automatically positions it. Clamping and sawing are then triggered. The positions are pre-programmed into the program control system. Once the machining is completed, the machine automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired unit at our production/demo hall at any time. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specially designed for cutting profiles and solid materials made of aluminium castings, copper, and hard plastics. Its automatic feed and automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm per stroke. Multiple strokes, and thus longer cut sections, can be conveniently programmed from the operator panel. The main clamping vice secures the material with two horizontal and two vertical clamping cylinders, while the feed vice clamps with one horizontal and one vertical cylinder. Both cutting and feed rates can be precisely adjusted to the material via the generously sized and user-friendly control panel. The machine is equipped with a mechanical lift height adjustment; the maximum cutting height is 100 mm. A large protective guard covers the entire work area and can be lifted pneumatically at the push of a button. Standard equipment for the UK 350 A 90° CNC + drilling unit includes an air spray gun for cleaning the machine. Connectors for a chip extraction system are provided. This machine comes with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • 90° cutting machine with powerful drive motor • CNC control; input for quantity and cut length conveniently via the large and clear operator panel • Up to 20 cutting programs can be saved • Servo-driven feed, single stroke 700 mm (for longer lengths, the feed automatically advances in increments until the desired length is reached) • Main vice with 4 pneumatic clamping cylinders—2 horizontal, 2 vertical • Feed vice with horizontal and vertical pneumatic clamping cylinders • Large protective hood covering the entire working area, pneumatically lifted • Adjustable cutting and feed speed • Maximum cutting height 100 mm • Air gun for cleaning the machine • Connections for an extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with a tool holder • Spindle speed and drilling depth are set via the machine control, drilling cycle is automatic Pjdpfokqz H Dox Ahcogt Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade dimension: 350 x 32 mm Material feed per stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! We look forward to your enquiry! Plantec Maschinen GmbH

Būklė: naujas, Saw blade diameter: 130 mm Cutting capacity at 90 degrees (round): 130 mm Cutting capacity at 90 degrees (square): 120 mm Cutting capacity at 90 degrees (flat): 180 x 100 mm Cutting capacity at 45 degrees (round): 115 mm Cutting capacity at 45 degrees (square): 100 mm Cutting capacity at 45 degrees (flat): 120 x 100 mm Pjdpfxshpktye Ahcsgt Motor: 3.3 / 4.4 kW Speed: 1400 / 2800 rpm Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electromechanical vertical circular saw for use with carbide-tipped saw blades, designed for series cuts from 45° right to 60° left.