Konsoliniai stelažai pirkti naudotą (94)

Būklė: geras (naudotas), Gamybos metai: 2019, Racking hall consisting of cantilever racks and pallet racks, OHRA, footprint approx. 867m² – used – : Pjdpfeyk H Risx Al Isgr Price ex location: €99,500 (net), for self-dismantling! Price for dismantling on request. For an additional charge, material for closing off one gable end is also available! Manufacturer: OHRA Year of manufacture: 2019, the sheets 2021 Dimensions of the hall: Width: approx. 17.35 m Length: approx. 50 m Rack height: approx. 6,385 mm Ridge height: approx. 7.10 m After dismantling, one long side of the hall will be open (where it currently adjoins the existing hall). Cantilever racking: 2 rows of 25 double-sided uprights each = total of 50 double-sided cantilever rack uprights Arm length: 1.20 m Arm load: 1,400 kg Load center: 600 mm Load per upright per side: 4,200 kg Axle spacing: 2 m Arms are plug-in Arms with impact protector, provision for unrolling protection Includes pallet beams Base level plus 3 arm levels per side Total depth: 2.70 m (2 x 1.20 m plus 30 cm frame) Aisle width: 3.25 m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet racking: Manufacturer: OHRA System: Pallet racking P3 Year: 2019 Compartment width: 2,900 mm, four bays at 2,400 mm length Compartment load: 2,000 kg Bay load: 6,000 kg Top edge first beam (buckling length): 800 mm 1 row 17 uprights 1 row 19 uprights (at two points with pipes) Total uprights: 36 Rack length: approx. 48.10 m Upright depth: 1.10 m Upright width: approx. 10 cm Beam height: approx. 10 cm Beam thickness (support surface): approx. 5.5 cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 at 2.90 m and approx. 24 at 2.40 m length Snow load zone: 1 (0.65 kN/m²) Wind zone: 1 / Terrain category 0,48 kN/m² Availability: immediately Condition: good, slight rusting and faded paint on outer uprights Location: Hockenheim area Drawing available as PDF, parts list, structural calculation. The side loader shown is also available for sale at additional cost (it has received a new battery recently, approx. €9,600 (net)).

Būklė: beveik kaip naujas (naudotas), Beveik nauji vienpusiai ir dvipusiai konsoliniai stelažai parduodami iš sandėlio. Sistemoje gali būti matomų pakrovimo žymių. Turimas kiekis: 20 vnt. Sistemos matmenys: Sijos: pagrindas + 5 sijų, ilgis 80 cm Keliamoji galia: 160 kg/kolona Pgjdpfxjxcn Eko Al Ior Kolonos: 4 vnt., aukštis 2500 mm, atstumas tarp kolonų 90 cm Keliamoji galia: 1000 kg/kolona Bendra sistemos ilgis: 3300 mm Bendras sistemos gylis: 1100 mm Vienpusis: 1090 EUR Dvipusis: 2000 EUR

Būklė: naujas, Cantilever racks are ideal for storing long goods such as pipes, bars, or panels. The uprights and profiles of our cantilever racks are made from particularly robust, hot-rolled IPE sections. Rack rows can be extended to any length and are available for single or double-sided use. Cantilever racking is relatively easy to install and reconfigure. With the absence of actual shelves, the height and angle of the arms can be adjusted quickly and easily. This flexibility allows you to store a wide range of loads. If you require racks or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and we are happy to support you with your planning. Additional accessories available include: Frame, corner and impact protection, push-through protection, chipboard panels, gratings, rear mesh panels, and depth supports. Shipping: Please enquire about freight costs by providing your postal code, location, and the required quantity of items. Further services: Planning, rack assembly/disassembly, purchase/sale Psdpjdmkv Hjfx Al Iogr Technical data, specifications, and prices subject to change or error. Prior sale reserved!

Būklė: naudotas, Dvipusė konsolinė lentyna strypinėms medžiagoms (savadarbė) Statinio aukštis: 1,9 m Lentynos ilgis: 4,3 m Stovų atstumas: 2000 mm Lentynų gylis: 600 / 500 / 450 ir 400 mm Leistina apkrova vienai lentynai: apie 200 kg Leistina kiekvieno lygio apkrova (3 stendai): apie 600 kg Bendra leistina apkrova (3 stendai): apie 4800 kg Pado plotis: 1000 mm - 3 stovai = 2 laukai = idealiai tinka 6 m strypams - Stovai iš 100 x 50 x 9 mm U profilio - Atraminės svirtys iš 100 x 50 x 7 mm U profilio - 8 lentynėlės kiekvienam stovui (iš viso 24 atraminės svirtys privirintos) Pgjdpfx Alexf Ut Ho Ier - 3 dvipusiai stovai su pagrindu - Prisukamos stovų jungtys iš stačiakampių vamzdžių - Nėra įstrižinių sujungimų Užstatymo plotas (I x P x A): 4400 x 1450 x 1900 mm Transportavimo plotas (I x P x A): 2100 x 1500 x 500 mm Bendras svoris: 350 kg

Būklė: naujas, Lentynos apkrova: 28 000 kg Pjdpfx Alofgyhae Isgr Apkrova vienam lygiui: 2 000 kg Pakrovimo lygių skaičius: 2 x 7 vnt. Rekomenduojamas medžiagos ilgis: 6 000 mm Stulpų tarpas: 3 000 mm Lentynos aukštis: 2 440 mm Matmenys (I x P x A): 3,7 x 2,55 x 2,4 m Optimaliausias sprendimas ilgų medžiagų sandėliavimui su 2 kolonomis. - Kiekvienas skyrius išsukamas į išorę, todėl pakrovimas ir iškrovimas kranu visada įmanomas. - Dvipusė konstrukcija.

Būklė: naujas, Stelažo keliamoji galia: 20 000 kg Keliamoji galia viename lygyje: 2 000 kg Lygio kiekis: 2 x 5 vnt. Rekomenduojamas medžiagos ilgis: 6 000 mm Stovo plotis tarp kolonų: 3 000 mm Pgsdpfsfgyg Tsx Al Ijr Stelažo aukštis: 2 440 mm Tinkamiausias sprendimas ilgų medžiagų sandėliavimui su 2 kolonomis. - Kiekviena lentyna gali būti išsukta į išorę, todėl visada įmanomas pakrovimas ir iškrovimas naudojant salės kraną. - Dvipusis dizainas.

Būklė: naujas, Stelažo apkrovos svoris: 20000 kg Apkrova vienam lygiui: 2000 kg Pakrovimo lygių skaičius: 2 x 5 vnt. Rekomenduojamas medžiagos ilgis: 3000 mm Stovų plotis: 1500 mm Stelažo aukštis: 2440 mm Tinkamiausias sprendimas ilgų medžiagų saugojimui su 2 kolonomis. - Kiekviena lentyna išsukama į išorę, todėl galima patogu krauti ir iškrauti naudojant angaro kraną. Pgedpofgyhfofx Al Ior - Dvipusė konstrukcija.

Būklė: naujas, Stelažo apkrova 24 000 kg Apkrova viename lygyje 2 000 kg Pgsdpfx Aofgyhgol Isr Krovos lygių skaičius: 2 x 6 vnt. Rekomenduojamas medžiagos ilgis: 3 000 mm Stovo plotis tarp atramų: 1 500 mm Stelažo aukštis: 2 440 mm Tinkamiausias sprendimas ilgų medžiagų sandėliavimui su 2 kolonomis. - Kiekvienas skyrius ištraukiamas į išorę, todėl pakrovimas ir iškrovimas su kranu visada yra įmanomas. - Dvipusė konstrukcija.

Būklė: naujas, Stelažo apkrova: 14 000 kg Vienos lentynos apkrova: 2 000 kg Pakrovimo lygių skaičius: 7 vnt. Rekomenduojamas medžiagos ilgis: 3 000 mm Stovo plotis tarp kolonų: 1 500 mm Stelažo aukštis: 2 440 mm Matmenys (I x P x A): 2,3 x 0,9(1,35) x 2,45 m Optimaliausias sprendimas ilgų medžiagų laikymui su 2 kolonomis. - Kiekviena lentyna gali būti išsukama į išorę, todėl pakrovimas/iškrovimas su cecho kranu visada įmanomas. - Vienpusiai išdėstytas. Pgsdpfxsfgyg So Al Ijr

Būklė: naujas, Lentynos apkrova: 28 000 kg Apkrova vienam lygiui: 2 000 kg Pedpfefgyhhox Al Isgr Pakrovimo lygių skaičius: 2 x 7 vnt. Rekomenduojamas medžiagos ilgis: 3 000 mm Stipinų plotis: 1 500 mm Lentynos aukštis: 2 440 mm Tinkamiausias sprendimas ilgų medžiagų sandėliavimui su 2 kolonomis. - Kiekviena lentyna gali būti išlenkta į išorę, todėl visada įmanomas pakrovimas ir iškrovimas naudojant salės kraną. - Dvipusis modelis.

Būklė: naujas, Stelažo apkrova: 12 000 kg Apkrova vienam lygiui: 2 000 kg Pedpfofgyg Rox Al Ijgr Lygių skaičius: 6 vnt. Rekomenduojamas medžiagos ilgis: 3 000 mm Statramstų plotis: 1 500 mm Stelažo aukštis: 2 440 mm Matmenys (I x P x A): 2,3 x 0,9(1,35) x 2,45 m Tinkamiausias sprendimas ilgoms medžiagoms sandėliuoti su 2 kolonomis. - Kiekviena lentyna atsiveria į išorę, todėl įkrovimas ir iškrovimas sandėlio kranu visada įmanomas. - Vienpusė konstrukcija.

Būklė: naujas, Stelažo apkrova: 10 000 kg Apkrova viename lygyje: 2 000 kg Lygių skaičius: 5 vnt. Psdsfgyg Nopfx Al Iegr Rekomenduojamas medžiagos ilgis: 3 000 mm Stovo plotis tarp atramų: 1 500 mm Stelažo aukštis: 2 440 mm Matmenys (I x P x A): 2,3 x 0,9 (1,35) x 2,45 m Geriausias sprendimas ilgos medžiagos sandėliavimui su 2 atramomis. - Kiekvienas skyrius gali būti išsuktas į išorę, tad krauti ir iškrauti su salės kranu visada galima. - Vienpusė konstrukcija.

Būklė: naujas, Stelažo apkrovos svoris: 21 000 kg Svoris vienam lygiui: 3 000 kg Krovimo lygių skaičius: 7 vnt. Rekomenduojamas medžiagos ilgis: 6 000 mm Psdpfxofgyg Is Al Ijgr Stovo tarpai: 2 x 2 000 mm Stelažo aukštis: 2 440 mm Idealiausias ilgų medžiagų sandėliavimo sprendimas su 3 stulpais. - Kiekviena lentyna išsukama į išorę, todėl įkrova ar iškrova su kranu visada įmanoma. - Vienpusė konstrukcija.

Būklė: naujas, Stelažo apkrovos svoris: 30 000 kg Apkrovos svoris vienam lygiui: 3 000 kg Pakrovimo lygių skaičius: 2 x 5 vnt. Pgodpsfgyhbofx Al Ijr Rekomenduojamas medžiagos ilgis: 6 000 mm Stulpų atstumas: 3 000 mm Stelažo aukštis: 2 440 mm Tinkamiausias sprendimas ilgų medžiagų sandėliavimui su 3 stulpais. - Kiekviena lentyna pasisuka į išorę, todėl pakrovimas ir iškrovimas visada įmanomas naudojant gamybinį kraną. - Dvipusis dizainas.

Būklė: naujas, Stelažo keliamoji galia: 15 000 kg Keliamosios galios vienam lygiui: 3 000 kg Krovos lygių kiekis: 5 vnt. Rekomenduojamas medžiagos ilgis: 6 000 mm Stovų atstumas: 2 x 2 000 mm Stelažo aukštis: 2 440 mm Tinkamiausias sprendimas ilgų medžiagų sandėliavimui su 3 kolonomis. - Kiekvienas lygis atverčiamas į išorę, todėl pakrovimas ir iškrovimas tiltu visada įmanomas. Psdpefgyg Esfx Al Isgr - Vienpusė konstrukcija.

Būklė: naujas, Stelažo apkrovos svoris: 18 000 kg Kiekvienos pakopos apkrova: 3 000 kg Krovimo lygmenų skaičius: 6 vnt. Rekomenduojamas medžiagos ilgis: 6 000 mm Atramų atstumas: 2 x 2 000 mm Stelažo aukštis: 2 440 mm Tinkamiausias sprendimas ilgoms medžiagoms sandėliuoti su 3 kolonomis. - Kiekviena lentyna gali būti išsukama į išorę, todėl pakrovimas ir iškrovimas visada įmanomas naudojant kraną. Podpjfgyg Hjfx Al Iegr - Vienpusis modelis.

Būklė: naujas, Lentynos apkrova: 12 000 kg Apkrova vienam lygiui: 2 000 kg Lentynų skaičius: 6 vnt. Rekomenduojamas medžiagos ilgis: 6 000 mm Kolonų atstumas: 3 000 mm Lentynos aukštis: 2 440 mm Matmenys (ilgis x plotis x aukštis): 3,8 x 0,9(1,35) x 2,45 m Optimaliausias sprendimas ilgų medžiagų saugojimui su 2 stulpais. - Kiekviena sekcija atlenkiama į išorę, todėl įkrovimas ir iškrovimas kranu visada įmanomas. Pedpfx Asfgyg Aol Isgr - Vienpusė konstrukcija.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany Pgodod Tbbdjpfx Al Ior - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. Pedpfx Alsmhhx Is Iogr The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone Pjdpfxemhhyae Al Iegr - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: Pgjdpfx Aod Tqaljl Ior - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Pgedpsh Ek Dasfx Al Ijr Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg Psdpfsfdkb Usx Al Iogr - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) Psdpfx Aemhhf Sjl Isgr - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Pgedpfx Alsmhhl Ho Ior Complete with assembly instructions and C4 load capacity signs according to DIN standard