Kitos šerpetų šalinimo staklės pirkti naudotą (43)

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Hfodpet Hw Shefx Ab Rsl Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: naujas, Working area (LxWxH): 1000 x 900 x 900 mm External dimensions (LxWxH): 1300 x 1750 x 2200 mm Weight: 350 kg Description: - Compact and attractive design - Extremely easy operation Hedpexaatzjfx Ab Rjfl - Low material consumption - Optimal use of space - Highly effective dust extraction - Efficient workflow - Environmentally friendly operation without dust emission - Adjustable material consumption - Suitable blasting media: all common dry abrasives such as corundum, steel grit, glass beads, glass granulate, ceramic beads Features: - Working chamber: 1,000 x 900 x 900 mm (LxWxH) - Perforated work grating with robust support (up to 250 kg load capacity) - On/off switch for lighting - Dust extraction unit with integrated dust filter cartridge, 8 m² filter area - 1x viewing window, 400 x 500 mm - 2x side pass-through openings with locking sliders - 1x sectional door opening upwards, providing full access to the blast chamber Air consumption: - Blast nozzle – 5.0 mm: 250–300 L/min - Blast nozzle – 6.0 mm: 350–400 L/min - Blast nozzle – 7.0 mm: 400–500 L/min - Blast nozzle – 8.0 mm: 800–1000 L/min

Būklė: naujas, Model designation: Chamfering system UZ12 ULTRALIGHT Hfsdpfsk D Nyisx Ab Rsl

Gamybos metai: 2003, būklė: naudotas, Technical Details: Workpiece length: 130 - 2000 mm Hodpfju Ngc Nex Ab Rofl Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Approx. machine weight: 4,500 kg CNC Milling & Deburring Machine for tube ends or round bar, double-sided. - Material feed via conveyor belt, travel distance approx. 3,300 mm. - Brush unit type PGAS 8/100 V-HV on both sides/opposite, speed 10,000 rpm (driven by compressed air) - Cutter holder, double-sided/opposite - Milling spindle and brush holder arranged in sequence - Operation via control panel on the control cabinet Supports: - 2 units, 1x movable and 1x fixed - Transverse adjustment of the right support length 1,725 mm manually - Working travel transverse = 5 - 50 mm; longitudinal = 5 - 50 mm - Working spindle = max. speed 320 rpm.

Būklė: naujas, Model designation Chamfering system B22 ZERO Hedpsk Au Dvofx Ab Rjfl

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Verbesserte Lösung zur Nachbearbeitung von Metall-3D-Druck-Komponenten Mit der EXTRUDE HONE Technologie steht Ihnen ein äußerst wirtschaftliches, schnelles, kontrollierbares, flexibles und umweltfreundliches Verfahren zur Verfügung, das eine optimierte Oberflächenbearbeitung von metallisch 3D-gedruckten Bauteilen ermöglicht. Wir haben eine gebrauchte Maschine auf Lager, die sofort lieferbar ist. Diese Maschine wurde nur kurzzeitig eingesetzt und befindet sich in hervorragendem Zustand. Hjdpfov Awrwex Ab Rofl MERKMALE UND VORTEILE + Effizienz bei der Oberflächenveredelung. Die Materialabtragrate (μm/min) ist schneller als bei anderen marktüblichen Methoden; z. B. bis zu 3-mal schneller als Elektropolieren. + Tooling direkt aus dem Drucker. Werkzeugaufnahmen und Vorrichtungen werden kostengünstig hergestellt, da sie 3D-gedruckt sind. + Höchste Flexibilität. Wir liefern innerhalb von zwei Werktagen ein komplettes und optimiertes Kathoden- und Vorrichtungskonzept für Ihre Bauteile. + Master-Pakete für verschiedene Werkstoffe. Spezifische Parameterdateien je Legierungsgruppe. + EXTRUDE HONE Connect. Von CAD zum Bauteil, auch aus der Ferne: Laden von Parametern, Aktualisierung von Materialpaketen, Software und Wartung. + Einfach in der Anwendung. Das völlig neue, intuitive Bedienkonzept beschränkt die Dateneingabe auf vier leicht verständliche Parameter.

Būklė: naujas, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Chamfering System UZ18 HARDWORKER Maximum chamfer width 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic-feed beveling machines on the market. It is suitable not only for workshop use, but also for on-site assembly. The machine features a steplessly adjustable working angle system. Thanks to the special drive system design, the UZ18 Hardworker is also suitable for tougher materials. The machine comes equipped with automatic feed, making operation with the UZ18 Hardworker highly convenient. * For conventional steel (up to a strength of 600 MPA/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Working range for plate thickness: 6 – 40 mm * Bevel angle easily adjustable steplessly from 15° to 50° without the need to replace any parts * Double-sided bevel (X, K) without material handling * Simple connection to the 3D manipulator for easier operation and handling * Silent operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine processes large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are fed directly into the machine - Max. chamfer width (hypotenuse): 18 mm - Stepless adjustable angle: 15° - 50° - Working range plate thickness: 6 – 40 mm - Motor: 750 W Hfjdpfx Abjk Egrte Rel - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We are happy to offer you an optional (mobile) 3D manipulator for this unit.

Būklė: naujas, Model designation Hodsk Au Drspfx Ab Refl B3 deburring/beveling machine

Būklė: naujas, Diameter -- mm Workpiece length -- mm Workpiece width 15 mm Angle range 15-50 ° Sheet thickness 6-40 mm Total power requirement 1.5 kW Feed speed 3.5 m/min. Dimensions 530 x 395 x 860 mm Machine weight approx. 94 kg The UZ15 RAPID is one of the fastest bevelling machines with automatic feed available on the market. It is suitable not only for workshops, but also for on-site assembly applications. The machine features a stepless bevel angle adjustment system and is equipped with an automatic feed, making operation with the UZ15 Rapid particularly comfortable. Hedpfxek Uqhas Ab Rjfl - For conventional steel (up to 600 MPa / 87,022 PSI yield strength), brass, copper, and aluminium materials - For bevelling workpieces with minimum dimensions of 70 x 150 x 6 mm - Sheet thickness application range: 6 – 40 mm - The bevel angle can be easily adjusted steplessly from 15° to 50° with no need to change any parts - Double-sided bevel (X, K) without material handling - Simple connection to the 3D manipulator for easier operation and handling - Quiet operation - Equipped with automatic feed - Suitable for stationary or mobile operation - The machine works with large workpieces without any support at a speed of 3.5 m/min - Smaller workpieces are fed directly into the machine - Discounted price when purchasing the UZ15 RAPID together with the 3D manipulator

Būklė: naujas, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50 ° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest beveling machines with automatic feed available on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly operations. The machine is equipped with automatic feed, making work with the UZ12 ULTRALIGHT particularly comfortable. * For conventional steel (up to a tensile strength of 600 MPA/87022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Suitable for plate thicknesses from 3 to 35 mm * Beveling of pipes from an internal diameter of 95 mm * Variable adjustment of the desired bevel via interchangeable holder kits for any given angle * Double-sided beveling (X, K) without material handling * Silent operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine processes large workpieces without additional support at a speed of 1.8 m/min * Smaller workpieces are placed directly into the machine Hodpfxeppgcyj Ab Rjfl * Lightweight and compact design, manageable by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT) - Plate thickness capacity: 3 to 35 mm - Motor: 400 W - Feed speed: 1.8 m/min - Dimensions: 470 x 294 x 523 mm We are happy to optionally offer you a 3D manipulator (mobile) for this unit.

Būklė: naujas, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Speeds 2850 rpm Angle range 0 - 60° (stepless) Machine weight approx. 19.5 kg Maximum bevel width 20 mm + face-side machining Designed for beveling and deburring straight edges, as well as for so-called FACING – the removal of an unwanted material layer on the face end of a workpiece, for example as created during oxy-fuel cutting of sheet metal. Specifically developed for the creation of visible bevels and weld seam preparations. Powerful electric drive for extreme workloads. * High-performance motor * Stepless adjustment of the working angle in the range of 0° - 60° * FACING – edge machining at a 0° angle for removing excess layers after oxy-fuel cutting Hodpfxoppgcvj Ab Rjfl * Unique mechanical scale for precise adjustment of the bevel width * Extremely compact and ergonomic design for high working productivity * All-round protective frame prevents damage and provides versatile gripping options * With the appropriate accessories, pipes from D = 150 mm can also be processed * Additional adjustable handle - Bevel width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We are also pleased to offer you, as an option, a pipe beveling attachment (D = 150 mm) for this unit.

Būklė: naujas, Vibratory Finishing and Mass Polishing Machine Manufacturer: ASSFALG Model: TV 95-SL Condition: New machine Speed: 1,500 - 3,000 rpm (infinitely variable) Trough dimensions: 498 x 384 x 410 mm Filling volume: 70 l Hjdodwq Hgepfx Ab Refl Standard equipment includes: - Timer - Water tank - Water pump - Operating manual

Būklė: naujas, Gamybos metai: 2025, Vamzdžio skersmuo (maks.): 48 mm, galia: 0,55 kW (0,75 AG), įėjimo įtampa: 400 V, Bei Duralbend fertigen wir hochwertige Entgratmaschinen, die auf die Anforderungen unterschiedlicher Branchen zugeschnitten sind. Entgraten ist ein entscheidender Prozess zur Entfernung von scharfen Kanten und Unregelmäßigkeiten an Metallrohren und gewährleistet eine saubere, glatte Oberfläche. Unsere Entgratmaschinen, die für Rohrdurchmesser bis zu 48 mm und 60 mm ausgelegt sind, eignen sich ideal für Branchen wie die Automobilindustrie, Möbelherstellung und Bauwesen. Hfodpjvx D Ecofx Ab Rsl

Būklė: naujas, DM1100 C Edge Rounding Machine for Laser-, Flame- and Punched Parts The DM1100 C performs edge rounding and simultaneously removes sharp burrs from both the inner and outer edges of steel, stainless steel, or aluminium parts after laser cutting, shearing, or punching. Hedpsd Evcwsfx Ab Rsfl The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks to uniformly round all edges of the entire product. A major benefit of this machine is the deburring of products with surface protection film, without damaging the film – only the edges are processed. Excellent processing of parts in a wide range of sizes, from small parts starting at 50 x 50 mm up to 1100 mm. Technical Data – DM1100 C: Working capacity (Ø mm): 1100x50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Current consumption (A): 13 Extraction connection per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Būklė: naujas, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Speed: 2,800 rpm Max. chamfer width: 1 mm Hfedpsdurxnsfx Ab Rjl Standard equipment includes: - Special flap wheel K80-ST - Extraction nozzle - Operating manual

Būklė: naujas, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Speeds 3600 rpm Angle range 30 - 60° (stepless adjustment) Hfsdpfoppgcrex Ab Rol Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width: 3 mm – Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for adjusting the machining depth * Safety cover * Adjustable working angle * For steel, stainless steel, aluminium, and other materials * Precise, solid and extra-long mechanical guide - Number of indexable inserts: 5 pcs (four-sided) - Feed: manual

Būklė: naujas, Edge and contour milling machine Make: Assfalg Model: KKE 1 Condition: New machine Hsdpfx Abebhfzbe Rsfl Speed: 8,000 - 24,000 rpm (stepless) Max. chamfer width: 3 mm Standard equipment includes: - Guide rail - Socket wrench, open-ended spanner - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with clamping nut - Operating manual

Būklė: naujas, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Beveling System UZ30 EXPRESS Maximum bevel width 30 mm with automatic feed The stationary UZ30 EXPRESS is one of the best solutions for beveling both large and small quantities, as well as smaller workpieces or long and narrow flat bars. The UZ30 EXPRESS can be used not only for beveling but also for deburring. Thanks to the unique cutter geometry, the feed rate can be set up to 3.5 m/min. For longer workpieces, it is possible to equip the machine with an additional infeed and outfeed table, which extends the working surface to an impressive 2,824 mm. - The machine is designed for beveling steel, aluminum, copper, and other materials, flat bars, pipes, and welding bevels - High-quality milling provides a mirror-finish surface - Feed rate control via rotary knob - Cutter speed controlled by frequency inverter - Additional optional accessories for pipe beveling available - Possibility to extend the worktable to a total length of 2,824 mm - Fast and precise machine adjustment using a gauge Technical data: Heder I E Exjpfx Ab Refl Approximate maximum bevel width: at 30° - 30 mm, at 45° - 20 mm, at 60° - 17 mm Adjustable bevel angle: 30° - 60° (constant) Sheet thickness application range: 3 - 100 mm Pipe beveling: OD 102 mm - OD 156 mm Milling motor power: 4000 W Milling head speed: adjustable with rotary knob (frequency converter) Feed rate: 0.6 - 3.5 m/min Weight: 400 kg Dimensions: 825 x 1200 x 1615 mm Number of indexable inserts: 5 pcs