Kraštų ir kontūrų frezavimo staklės KKE1

Assfalg KKE 1

Būklė: naudotas, Gamybos metai: 1966, Max. pulling force 5 t, maximum stroke 850 mm, maximum cutting speed 12 m/min, maximum return speed 25 m/min, clamping surface 410x575 mm, slot width 3 - 90 mm, drilling diameter 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base below floor 1,400 mm. Lajdpfxecm Elno Alrjd

Būklė: naujas, Ostas 3-Roller Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Special Equipment Included in the Price: - Motorized adjustment of lower rollers - Hardened rollers - Motorized adjustment of rear rollers - Digital display Lajdpfx Alog Nz T Ijrjd Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending sheet thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor power: 4 kW Equipment: - Electrically driven upper and lower rollers - Swing-out upper roller - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE mark

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Lsdpfx Aouiy Hrelrjad Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naudotas, Gamybos metai: 2012, X-axis travel: 630 mm Y-axis travel: 800 mm Z-axis travel: 750 mm Control: SINUMERIK 840D sl Siemens B-axis: 360° x 0.001° A-axis: -200° to +25° x 0.001° Spindle speeds - stepless: 20 - 18,000 rpm Drive power, 100% duty cycle: 28.00 kW Drive power, 40% duty cycle: 34.00 kW Torque at 40% / 100% duty cycle: 110 / 84 Nm Tool holder: HSK 63 Feed rate X/Y/Z axes: 1 - 100,000 mm/min Rapid traverse X/Y/Z: 100.00 m/min Feed force X/Y/Z: 9 / 6 / 9 kN Feed rate B-axis: 1 - 14,400 °/min Feed rate A-axis: 1 - 7,200 °/min Lajdpfx Alevxwxvjrsd Pallet size: 2x 500 x 500 mm Maximum workpiece weight: 400 kg Maximum workpiece diameter: 800 mm Maximum workpiece height: 800 mm Tool magazine with 63 positions Maximum tool diameter: 280 mm Maximum tool length: 550 mm Maximum tool weight: 15.00 kg Total connected load: 65.00 kW Machine weight approx.: 14.00 t Space required approx.: 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, and emulsion mist extractor. Machine was part of a production line, therefore supplied without chip conveyor and without coolant system.

Būklė: naujas, Gamybos metai: 2024, Darbinis plotis: 600 mm Darbinis aukštis: nuo 5 mm iki 300 mm Minimali ruošinio ilgis: 250 mm Agregatai: 2 1. Pjūklo pjovimo agregatas Random System: Pjūklo pjūvio išvaizda 2. Šepetys: Tynex, diametras 210 mm Aukščio reguliavimas: elektrinis Aukščio indikatorius: skaitmeninis Padavimo greitis: 4–14 m/min Pjūklo agregato variklio galia: 1,1 kW Ljdpfx Aoupy Spjlroad Šepetėlio variklio galia: 4 kW Padavimo variklio galia: 0,37 kW Staklių ilgis: 1400 mm Staklių plotis: 1500 mm Staklių aukštis: 1600 mm Svoris: 700 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site Ljdpfx Aeuiy Ngolroad - Training for your staff

Būklė: naujas, Gamybos metai: 2025, Bügelschweißmaschine Technische Daten: Modell: KAB10 CE-zertifiziert Bedienung: Fußschalter Leistung bei 50% ED: 10 kVA, Dauerleistung: 7,1 kVA Schweißkapazität: bis zu 8mm + 8mm Stahldraht (weich) Primärwicklung: Kupferdraht Sekundärwicklung: Kupferschiene Kern: EI-Kern aus Siliziumstahl Netzanschluss: 400V/50Hz Netzkabel: 3 m Schutzart: IP21 Platzbedarf (B/T/H): 625mm x 600mm x 1035mm Gewicht: 90 kg Lajdpfxstwfv Ds Alrsd Garantie: 1 Jahr (+10 Jahre Ersatzteilversorgung)

Būklė: naudotas, Gamybos metai: 1988, Plate width 2000 mm Plate depth 3500 mm Plate height 270 mm Weight 5.5 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the production of a video is not possible. Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, sending additional pictures is not possible. Lasdpfx Ajiiii Solrod +++++

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Pressure: 85.0 t Bending length: 2050 mm Frame gap: 1750 mm Throat depth: 410 mm Stroke: 365 mm Installation height: 535 mm Approach speed: 200 mm/sec Working speed: 1.0 - 10.0 mm/sec Return speed: 135 mm/sec Backgauge - adjustable up to max. 600 mm Table width: 120 mm Working height: 1050 mm Operating hours: 28,500 h Oil capacity: 200 l Operating pressure: 340 bar Total power requirement: 14.0 kVA Machine weight: approx. 9,050 kg Dimensions (LxWxH): 2680 x 2100 x 2885 mm with increased installation height / piston stroke Very well-maintained condition (!!) with only approx. 28,500 operating hours - in tested condition - Machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * Pivoting control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized backgauge (X axis) - CNC electro-motorized height adjustment of backgauge (R axis) - CNC electro-motorized adjustment of backgauge fingers (Z axes) - CNC pneumatic die shift (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic lower tool clamping - 1x mobile two-hand / foot control - 2x front, robust support arms, incl. "Sliding System" - Side safety enclosure (swing doors) - Rear safety enclosure (swing doors) - Bending tool storage cabinet (front right side) - Original operating manual + circuit diagram, etc. Further technical data: Lasdpfxoxaa Urs Alred - X axis approach speed .. 500 mm/sec - R axis approach speed .. 300 mm/sec - Z axis approach speed .. 1000 mm/sec - X axis travel range .. max. 600 mm - R axis travel range .. max. 250 mm

Būklė: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting Lasdpfxjiu Smbo Alrjd 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package