Kitos nusiurbimo sistemos pirkti naudotą (28)

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm Hsdpfx Abofyadbo Ssni • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2025, būklė: naujas, Motor power: 3.75 kW / 5 HP Power supply: 400V Motor type: 3-phase Frequency: 50 Hz Motor speed: 2850 rpm Fan diameter: 350 mm Inlet suction pipe diameter: 300 mm Airflow: 8,900 m³/h Hnedpeglf Dnefx Ab Ssi Max. static pressure: 1,493 Pa Post-filter sizes: Ø61 × 140 cm x 2 pcs / Ø61 × 140 x 4 x 2 pcs Aspiration system dimensions: 3,395 × 775 × 2,864 mm Weight: 138 kg

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Extraction table without rear/side walls Technical data: Working surface: 2,000 x 1,000 mm Working height: 850–950 mm (manual adjustment) Width: 2,250 mm (including energy strip) Energy strip with tool tray: 2x 230 V sockets with hinged cover, 2x compressed air couplings, power cable and main switch Extraction nozzle Ø 160 mm, with rim Hsdpfeuzf Ihjx Ab Sjni

Būklė: naujas, ATEX version Geared radial fan Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Hsdpfx Aeh Ucqtjb Sjni Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Noise level: 78 dBA Folding side and rear wall (rear wall with extraction function) Work surface 2500 x 800 mm Working height 930 mm Including centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal airflow 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter 320 mm Filter cartridge length 600 mm Total filter area 34.8 m² Noise level: 78 dBA Compressed air: 5-7 bar Note on used machines: • Subject to errors in technical data and prior sale. • All prices are ex works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as-inspected without any warranty or guarantee. The buyer is free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Būklė: naudotas, Square approx.: 510 x 510 mm Hjdpfx Ajlf Iz Aob Ssni Inner tube: 230 mm

Būklė: naudotas, Jungtys: 145 mm Pagrindinis vamzdis: 310 mm Hjdelf Izmopfx Ab Ssni su 5 jungtimis.

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Siūloma mobili Höcker siurbimo ir filtravimo įranga. Filtravimo klasė: H3, variklio galia: 4 kW, siurbimo jungtis: 200 mm, filtro plotas: apie 12 m², maksimali oro srauto apimtis: 3400 m³/h, maksimalus vakuumas: 2700 Pa, surinkimo indo talpa: 350 l, įrenginio matmenys (I/P/A): apie 2000/1100/2000 mm, svoris: apie 420 kg. Galima apžiūra vietoje. Hsdpfx Ajyg Nu Nsb Seni

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Has a rake Capacity: 1755 m³/h Single section Hnodpfx Aohqb Swjb Sji Dimensions: Height: 260 cm Width: 85 cm Length: 110 cm Inlet diameter: 160 mm

Būklė: naudotas, Gamybos metai: 2021, bendras aukštis: 1 800 mm, bendras ilgis: 1 200 mm, bendras plotis: 1 000 mm, bendras svoris: 150 kg, žarnos ilgis: 10 000 mm, reikalingas aukštis: 1 800 mm, vietos reikalavimas ilgis: 1 200 mm, reikalingas plotis: 1 000 mm, transporto ilgis: 1 200 mm, transporto plotis: 1 000 mm, transporto aukštis: 1 800 mm, bakelio talpa: 50 l, No. 04521 ESTA ZA 50 Cyclone Pre-Separator Unused, year of manufacture 2021, in mint condition Pre-filtration for high dust volumes The stationary cyclone pre-separators are installed before the main filter unit and are designed for the pre-separation of dry, free-flowing dusts. Medium and coarse dust particles are already separated in advance, so only fine dusts need to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% for a median particle size of at least 150 microns. Cyclone diameter (top): 282 mm Cyclone height: 1,458 mm Dust container: 50 litres Connection pipe diameter (top): 50 mm Connection pipe diameter at container: 82 mm Includes approx. 10 m extraction hose, diameter 50 mm Transport dimensions approx. 1,200 x 1,000 x 1,800 mm (L x W x H) Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended after prior arrangement. Sale is as-is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Hnodpfx Asx Upqhob Sei Subject to prior sale No warranty on used machinery; sold “as seen” Payment terms: Prices are plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex stock

Būklė: naudotas, Stalo dydis 1250 x 750 mm Hsdpjxcp Nwsfx Ab Ssni

Būklė: naudotas, used Manufacturer: Trox Length: 700 mm Width: 700 mm Height: 500 mm Return air Hnedpfovwgcnex Ab Sei Limit switch for monitoring Location: 97447 Gerolzhofen Delivery in as-is condition as inspected - free loaded -

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1”. YOUR BENEFITS - Accessible from 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Offset longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at nozzle at 22 m/s: - 1,000 Pa at DN140 mm - 700 Pa at DN160 mm Adjustable working height: 735-1,015 mm Work surface (W x L): 946 x 1,500 mm Hnsdpedqzhbsfx Ab Sji Dimensions (W x L): 1,000 x 1,600 mm Weight: approx. 73 kg

Gamybos metai: 2020, būklė: visiškai atnaujintas (naudotas), For extraction diameters from 120 to 700 mm. Please inform us of your required air volume flow rate, and we will select the appropriate cyclone for you. Hedpfx Abjftb Ebo Seni Various configurations available: - Legs made from painted square steel profiles - Rotary airlock valve and transition piece with inspection hatch - Inlet box with backdraft damper - Tangential outlet with or without pressure relief area - Square outlet with or without pressure relief area - Sound insulation Of course, you can also obtain all necessary accessories from us, such as fans, extraction pipes, deflector hoods, etc. Operating principle: Contaminated air is introduced tangentially into the upper cylindrical section, causing the air to spin. Under the influence of centrifugal force, the material is pushed towards the perimeter of the cyclone and discharged through the hole at the bottom. The cleaned air exits the cyclone via the centrally positioned outlet pipe at the top. The separation efficiency increases with the feed velocity; however, pressure loss and thus energy consumption also increase. Therefore, it is important to find an optimal balance. We have developed a range of cyclones optimized for filtering large material volumes. They are therefore ideally suited for the wood, paper, recycling, grain, and feed industries. Below, you can select the cyclone with the correct size based on the air quantity and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa.

Būklė: naudotas, Suction collector / extraction hood - used - ----- Technical data ----- Hodpfx Abou R Tb Ue Sjni Connection nozzle: 350 mm Nozzles: 5 units Nozzle diameters: 2x160 mm, 2x100 mm, 1x120 mm

Būklė: naudotas, Extraction collector suction bell - used - ----- Technical specifications ----- Connection nozzle: 300 mm, Nozzles: 5 pieces, Hnodju R S Uyspfx Ab Soi Nozzle diameter: 160 mm

Būklė: naudotas, Dulkių ciklonas, Dulkių separatorius, Naudota įranga Bendri matmenys: 1200 x 1150 x 3270 mm Įėjimo pusė: 280 mm Hsdpfxoxt Tw Hj Ab Soni Išėjimo pusė: 250 mm Cilindro korpuso aukštis: 800 mm

Gamybos metai: 2025, būklė: naujas, Dimensions (L/W/H): 1410 x 1130 x 1295 mm Weight: 320 kg Total power requirement: 22 kW Chip extraction fan FAN 22.0 kW - Suction and discharge nozzle diameter: 450 mm - Max. air flow: 15,000 m³/h - Permitted negative pressure: 1,800 Pa - Motor power: 22.0 kW / 400 V - Speed: 3,000 rpm Hnedpfx Aevz Ei Iob Soi - Reinforced steel impeller directly mounted on motor shaft - Primed and painted - Including vibration dampers - Including switch cabinet with star-delta switch - Dimensions: L=1410 mm, W=1130 mm, H=1295 mm - Weight: 320 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (L/W/H): 890 x 1081 x 830 mm Weight: 268 kg Hnsdpfxevz Emaj Ab Ssi Total power requirement: 15 kW Chip extraction fan FAN 15 kW - Suction and pressure connection diameter: 355 mm - Max. air flow: 10,000 m³/h - Perm. negative pressure: 1,800 Pa - Motor power: 15.0 kW / 400 V - Speed: 3,000 rpm - Reinforced steel impeller mounted directly on the motor shaft - Primed and painted - Including vibration isolators - Including control cabinet with star-delta switch - Dimensions: L=890, W=1081, H=830 mm - Weight: 268 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (Length/Width/Height): 740 x 630 x 1028 mm Weight: 60 kg Total power requirement: 3 kW Chip extraction fan FAN 3.0 kW - Suction and discharge nozzle diameter: 250 mm - Max. air flow rate: 4,000 m³/h - Motor power: 3.0 kW / 400 V - Speed: 3,000 rpm - Reinforced steel impeller mounted directly on the motor shaft - Primed and painted Hedpfevz Endex Ab Ssni - Including vibration isolators - Dimensions: L=740, W=630, H=1028 mm - Weight: 60 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (L/W/H): 910x1200x850 mm Weight: 400 kg Total power requirement: 18.5 kW Chip extraction fan FAN 18.5kW - Suction and pressure nozzle diameter: 400 mm - Max. volumetric flow: 12,500 m³/h - Permissible negative pressure: 2,000 Pa - Motor power: 18.5 kW / 400 V - Speed: 3,000 rpm - Reinforced steel impeller mounted directly on motor shaft - Primed and painted Hnsdpovz Exvsfx Ab Sji - Including vibration dampers - Including control cabinet with star-delta switch - Dimensions: L=910, W=1200, H=850 mm - Weight: 400 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (L x W x H): 690 x 771 x 790 mm Hnjdpjvz Enwefx Ab Sji Weight: 130 kg Total power requirement: 5.5 kW Chip extraction fan FAN 5.5kW - Suction and discharge nozzle diameter: 280 mm - Max. air flow: 5,000 m³/h - Permissible negative pressure: 2,500 Pa - Motor power: 5.5 kW / 400 V - Speed: 3,000 rpm - Reinforced steel impeller mounted directly on the motor shaft - Primed and painted finish - Including vibration dampers - Dimensions: L = 690 mm, W = 771 mm, H = 790 mm - Weight: 130 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (L x W x H): 800 x 847 x 790 mm Weight: 250 kg Total power requirement: 7.5 kW Chip extraction fan FAN 7.5 kW - Suction and pressure connection diameter: 300 mm - Max. air flow: 6,500 m³/h Hnodpfxevz E Dls Ab Sji - Permissible negative pressure: 2,500 Pa - Motor power: 7.5 kW / 400 V - Speed: 3,000 rpm - Reinforced steel impeller mounted directly on the motor shaft - Primed and painted - Including vibration dampers - Including control cabinet with star-delta switch - Dimensions: L=800, W=847, H=790 mm - Weight: 250 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (L/W/H): 880 x 1037 x 820 mm Weight: 188 kg Total power requirement: 11 kW Chip extraction fan FAN 11.0 kW - Suction and pressure connection diameter: 355 mm - Max. air flow rate: 8,000 m³/h - Permissible negative pressure: 2,500 Pa - Motor power: 11.0 kW / 400 V - Speed: 3,000 rpm - Reinforced steel impeller mounted directly on the motor shaft - Primed and painted - Including vibration dampers Hnsdpfevz Ew Eex Ab Sji - Including control cabinet with star-delta switch - Dimensions: L = 880, W = 1037, H = 820 mm - Weight: 188 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (L/W/H) 1510x1250x1400 mm Weight 600 kg Total power requirement 30 kW Chip extractor fan FAN 30.0 kW - Suction and discharge nozzle diameter: 500 mm - Max. air flow: 20,000 m³/h - Permissible negative pressure: 1,800 Pa - Motor power: 30.0 kW / 400 V - Speed: 3,000 rpm - Reinforced steel impeller mounted directly on the motor shaft - Primed and painted Hnodsvz Enqepfx Ab Ssi - Including vibration elements - Including control cabinet with star-delta switch - Dimensions: L=1510 mm, W=1250 mm, H=1400 mm - Weight: 600 kg

Gamybos metai: 2001, veikimo valandos: 123 h, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 123, Chip silo, diameter: 5 m, height: approx. 8 m, net capacity: 42 m³. Suitable for the storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time, by prior arrangement. Hjdpfxoftdv Uo Ab Soni