Kitos liejimo mašinos pirkti naudotą (127)

Gamybos metai: 2012, Sąlyga: labai geros būklės (naudotas), Years: 1x 2011 1x 2006 2x 2008 Ijdpfju Ap Twex Af Ieht (It is possible to purchase up to 6 units)

Gamybos metai: 2014, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Ihodjh Nypfjpfx Af Ist

Gamybos metai: 2017, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 7000 kN, screw diameter: 40 mm, screw speed: 300 rpm, dosing stroke: 200 mm, control system: Engel CC300, weight: 22 t, operating hours: 3871 h, equipped with electric 6-station rotary table, electric quick adjustment for moving machine platen, two injection units, 2 x 3-zone D45 mm screws, 32 hot runner control zones, electric plasticizing units, and documentation. Ihodpfek N Dndex Af Ist

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. opening stroke: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, one set of new pumps and GEIGER LR 16 EC handling unit; the handling unit should be overhauled. Ihedpjiiv Aqsfx Af Iot

Gamybos metai: 1986, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 2,700 kN, injection volume: 20,300 cm³, injection pressure: 1,360 bar, total power: 418 kW. The machine was completely overhauled in 2008, received new pumps, and all bushings and guides were replaced. In 2016, the machine was fitted with a new Siemens control system. In 2021, all pumps and valves were recalibrated, and all slideways were renewed. Isdpspvkzysfx Af Ieht

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 500 kN, heating capacity: 4.9 kW, connected load: 19.9 kW, operating hours: 57,024 h, equipped with handling system and conveyor belts, without dosing unit. Iodpfxomrri Do Af Isht

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), Injection force: 113 kN, clamping force: 500 kN, opening stroke: 50 mm, weight: 4.4 t, supplied with documentation and software. An on-site inspection under power is possible. Ihsdpfx Afep S Srho Iet

Gamybos metai: 2022, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Mašina NAUJA. Kaina 240 000 € bruto. Ihsdpfx Aswdtd Dsf Iot

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. Ihsdjtyyn Hepfx Af Ist 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), Uždarymo jėga: 500 kN, kolonų atstumas: 270 mm/270 mm, atidarymo eiga: 325 mm, min. įrankio sumontavimo aukštis: 225 mm, maks. plokščių atidarymas: 550 mm, tvirtinimo plokščių matmenys X/Y: 500 mm/500 mm, mašinos matmenys X/Y/Z: apie 3700 mm/1400 mm/1900 mm, svoris: apie 1750 kg. Galima apžiūra vietoje. Ihsdpfx Afexltvmo Ijt

Gamybos metai: 2022, Sąlyga: paruoštas naudoti (naudotas), An as-new injection moulding machine including robot is available. 1) Injection moulding machine Krauss Maffei, year of manufacture: 2022, clamping system: hydromechanical two-platen clamping system. Plasticising unit: 8100, screw diameter: 105 mm, nozzle radius: 35 mm, nozzle bore: 6 mm, clamping force: 1700 t, control unit: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120 kg, reach: 3100 mm, repeatability: +/-0.05 mm, controller: KR C5. Documentation available. Inspection on site is possible. Ihodpfevpvlcex Af Iot

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), Five identical Arburg injection moulding machines are available. Clamping force: 800 kN, Tie bar distance: 420 mm x 420 mm, Installation height: 250 mm, Plate distance: 700 mm, Nozzle diameter: 45 mm, Weight: approx. 3,800 kg, Control unit: Selogica 3.020. All machines come complete with temperature control unit and conveyor belt. Documentation is available. The machines are currently in storage. On-site inspection is possible. Ijdpeviv Dfjfx Af Ijht

Gamybos metai: 2012, Sąlyga: paruoštas naudoti (naudotas), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, clamping force: 600kN, screw diameter: 25mm, tie bar distance: 370mm, max. injection volume: 49cm³, operating hours: 55,682h. Documentation available. On-site inspection possible. Ihodpfst E Tq Rex Af Ijt

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 2500 kN, clear tie bar distance: 630 mm/630 mm, opening stroke: 1150 mm, min. mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control: MC4. Machine dimensions: 5700 mm/2200 mm/2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner control zones, 4 core pulls, blow unit, accumulator, hydraulic tie bar puller, energy-saving circuit, ALS interface, 20mA interface, and colour dosing device interface. On-site inspection possible, documentation available. Isdpfxjuiykds Af Ioht

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Various injection moulding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100 t, screw diameter: 30/35 mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100 t, screw diameter: 25 mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200 t, screw diameter: 25/12+15 mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 35 mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30/25 mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60 t, screw diameter: 25 mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80 t, screw diameter: 25 mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale is possible. Some machines are partially cannibalised and/or defective. Ihsdpjwkiicsfx Af Iot

Gamybos metai: 2021, Sąlyga: paruoštas naudoti (naudotas), Parduodama beveik naujos būklės Arburg liejimo mašina. Uždarymo jėga: 1600 kN, kolonų tarpas: 520 mm, uždarymo eiga: 364 mm, išstūmimo eiga: 150 mm, išstūmimo jėga: 40 kN, liejimo mazgas: 400, įpurškimo slėgis: 2500 bar. Mašinos matmenys X/Y/Z: apie 6000 mm / 1800 mm / 2200 mm, svoris: apie 6000 kg, valdymas: Selogica, darbinės valandos: apie 67 h. Komplekte aptvėrimas su švaraus oro tiekimo FilterFanUnit ir išėmimo robotu. Yra dokumentacija. Galima apžiūrėti vietoje. Ihodpfow Rqwtjx Af Ijt

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), A large-format injection molding machine Krauss-Maffei without robot, conveying equipment, safety enclosure, and attachments is available. Clamping force: 1300t, injection volume: approx. 8000 cm³. Overall system dimensions (L/W/H): approx. 13,000 mm / 3,550 mm / 2,850 mm, machine weight: approx. 83,000 kg, operating hours: 73,259 h, production hours: 57,753 h. Documentation is available. On-site inspection is possible. Expected availability from Q1/2026. Ijdpfowut Hyox Af Isht

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), A total of four Engel injection molding machines are available: 1) Engel ES 80/25 HL-V, year of manufacture: 1999. This machine is defective and offered as a source of spare parts. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation is available. Inspection on site is possible. Sale of individual machines is possible. Ijdpfsv Extzex Af Ieht

Sąlyga: paruoštas naudoti (naudotas), Clamping force: 350 kN, Tie bar distance: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, minimum mold installation height: 180 mm, maximum opening stroke: 350 mm, maximum platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions (X/Y/Z): approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. An on-site inspection is possible. Iedpfxjwaa H Ds Af Ioht

Gamybos metai: 1991, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 12,000 kN, opening force: opening stroke: closing speed: 1,030 mm/s, max. mold weight: 22.5 t, max. platen dimensions: 1,900 x 1,950 mm, tie bar diameter: 220 mm, ejector force: 130 kN, screw diameter: 133 mm, injection pressure: 1,445 bar, width: 3,500 mm, length: 14,745 mm, height: 2,740 mm. Comes with documentation. On-site inspection possible. Ihedpjwbpzasfx Af Ijt

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), A Ferromatik Milacron injection molding machine is available without additional or peripheral equipment. Clamping force: 1000 kN, injection pressure: 2000 bar, shot volume: 254 cm³, heating capacity: 14.8 kW, tie bar distance: 508 mm, machine weight: approx. 6750 kg, operating hours: approx. 33,649 h. An on-site inspection is possible. Ijdjwut Htopfx Af Ijht

Sąlyga: naudotas, Gamybos metai: 2006, A Demag Ergotech injection moulding machine including a Wittmann robot and machine enclosure is available. 1) Demag Ergotech 50/355-200 injection moulding machine, year of manufacture: 2006, tie bar spacing X/Y: 355mm/355mm, min. mould height: 210mm, max. platen spacing: 610mm, screw diameter: 25mm, shot weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control system: CDIAS. 2) Wittmann W721 handling robot, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Safety enclosure. Documentation available. On-site inspection is possible. Ihodswvadnopfx Af Ijt

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), A 3-component injection moulding machine Krauss Maffei with Multinject system, conveyor belt, cooling and hydraulic technology, and various accessories is available. Pump capacity: 37 kW, screw diameter 1/2/3: 25 mm / 35 mm / 18 mm, injection volume 1/2/3: 160 cm³ / 220 cm³ / 55 cm³, nozzle bore: 6 mm, non-return valves: RSP 4F. Overall system dimensions (L/W/H): approx. 5700 mm / 2000 mm / 2200 mm, conveyor belt dimensions (L/W/H): approx. 2300 mm / 300 mm / 600 mm-700 mm, weight: approx. 12,000 kg, control system: MC4, pump operating hours: 51,709 h, automatic mode hours: 47,009 h. Without auxiliary unit. Documentation available. On-site inspection possible. Expected to be available from December 2025. Ihodpfx Afow Emyhj Iet

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Two Krauss Maffei injection moulding machines available: 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions (L/W/H): approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control system: MC4, operating hours: approx. 86,000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions (L/W/H): approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control system: MC4, operating hours: approx. 82,000h. Documentation available. Inspection on site possible. Isdpfow Emybjx Af Ieht

Gamybos metai: 2012, Sąlyga: paruoštas naudoti (naudotas), Mounting height min./max.: 200 mm / 550 mm, opening stroke: 350 mm, clamping force: 350 kN, screw diameter: 20 mm, tie bar distance: 270 mm, max. injection volume: 31 cm³, operating hours: 61,737 h. Documentation available. On-site inspection possible. Ihjdpet E Tq Djfx Af Ijt