Horizontalios juostinės pjūklai – rankiniai – apvali pjovimo sritis 221–299 mm pirkti naudotą (70)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Metalo apdirbimo staklės ir įrankių staklės Metalo pjūklai Horizontalios juostinės pjūklai – rankiniai – apvali pjovimo sritis 221–299 mm
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKHBS320
Skambinti
Būklė: naujas, Gamybos metai: 2026, CORMAK HBS320 for double-sided mitre cutting in the range from -45° to +60°. The design of the machine is based on solutions and projects by Polish engineers. Its precision and manufacturing accuracy place it at the forefront of band saws offering cutting widths up to 320 mm. A major advantage of this machine is the latest generation hydraulic cylinder. The machine features a reinforced vise base and quick-release vise function.
Machine features
The CORMAK HBS320 metal band saw allows for cutting material at any angle between -45° and +60°. The material to be cut can be fed manually or using any external feeder. The cut feed is gravity-assisted, controlled by hydraulic oil flow within the cylinder. The operator starts the machine with a start button and sets the desired cutting speed. After the cutting cycle completes, the machine stops automatically and the operator raises the arm to the starting position.
Gujdpfx Apoi D Dgwo Iec
The saw arm is made from a heavy-duty, one-piece grey cast iron casting. Together with a 27 mm wide blade, it is perfectly suited for series cutting of structural, stainless, and tool steels. The vise is set in an adjustable bed and equipped with a quick-release clamp. The blade guides are fitted with ball bearings and carbide inserts, ensuring excellent cutting precision and straightness. This greatly affects blade guidance, durability, accuracy, and cut quality. Carbide guidance significantly reduces machine and blade wear.
The base is a rigid, steel-welded frame. Inside is a separate coolant reservoir with an electric pump. The top of the base is tray-shaped, channeling coolant and collecting chips generated during cutting. Also attached to the base is a robust cast iron worktable with a swiveling arm and control panel.
Feed speed can be regulated from the control panel. Two blade speeds are available: 44 and 88 m/min. In the lowest arm position—after the cut—the blade drive is switched off automatically. Safety is ensured by blade covers and micro-switches that stop the motor when the cutting cycle is complete or any guard is opened. Additional protection involves automatic shutdown if the blade breaks.
Technical data
Ø MAX - 260 mm / straight cutting
H x W MAX - 320 x 160 mm / straight cutting
POWER SUPPLY - 3-phase 400V
TOTAL POWER - 1.5 kW
ARM DESCENT CONTROL - hydraulic cylinder
BLADE SIZE - 2740 x 27 x 0.9 mm
BLADE SPEED - 44 / 88 m/min
VISE BASE HEIGHT - 920 mm
DIMENSIONS - 1400 x 880 x 1550 mm
WEIGHT - 280 kg
Cutting parameters
Angle
0º -----ø260 320 x 160 255 x 255
45º R ø210 210 x 200 210 x 210
60º R ø135 135 x 130 130 x 130
45º L ø160 220 x 130 160 x 160
All prices are NET and do not include transport costs.
For more information, please contact us by phone or email. We also invite you to browse our full offer on our website.
Mažas skelbimas
Eschborn
1 173 km
Horizontalus juostinis pjūklas
JAESPAW 260 AZ
Skambinti
Būklė: naudotas, Gamybos metai: 1994, Semi-automatic horizontal bandsaw for solid materials and profiles
Cutting capacity up to approx. Ø 260 mm
Robust cast construction
Gedpjwbfhcofx Ap Ijuc
Manual feed and hydraulic cutting cycle
Swiveling head for miter cuts
Integrated coolant system
Ideal for workshops and industrial use
Mažas skelbimas
Concordia Sagittaria
1 304 km
Juostinės pjovimo staklės
MaccSPECIAL 411 CSO
Skambinti
Būklė: naujas, MACC SPECIAL 411 CSO Gravity Descent Bandsaw
Brand New CE
Gusdpfxoficb Te Ap Ioc
The key features of the machine (blade support rigidity, flywheel sizing, blade guides, blade tensioning) have been thoroughly engineered to prevent blade fatigue, extend blade life, improve cutting straightness and reduce cutting time.
- Bandsaw with gravity arc descent regulated by a hydraulic circuit; manual bar feed and vice closing; manual head return
- Vertical rotation on an adjustable, backlash-free conical bearing pivot
- Blade drive with dual-speed motor and special gearbox featuring a bronze gear and hardened, ground worm screw
- Appropriately dimensioned flywheels
- Robust blade guides with sealed ball bearings and adjustable carbide pads
- Blade tensioning by electromechanical device with micro-switch blade rotation control
- Quick-approach vice device
- Safety devices on the flywheel guards, control knob, and blade
- Hydraulic cylinder for controlled descent
- Cutting thickness: 1.2 mm
- Cutting range: 45° left, 60° right
- Adjustable stop for repetitive cuts
- 24V low voltage system
- 0.06 kW electric pump for blade coolant
- Pedestal with chip collection drawer and removable coolant tank
- Machine prepared for pallet truck handling

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Concordia Sagittaria
1 304 km
Rankinės pjovimo staklės
Macc320 M
Skambinti
Būklė: naujas, Brand new, factory condition
No. 1 available for immediate delivery!
"CE" certification
Made in Italy
Cutting Capacity:
0° = round tube 230 mm – square 220 mm – rectangle 170 x 300 mm
45° = round tube 200 mm – square 180 mm – rectangle 180 x 230 mm
60° = round tube 130 mm – square 120 mm – rectangle 110 x 130 mm
TECHNICAL DATA AND STANDARD EQUIPMENT:
Vertical rotation on pivot with adjustable tapered roller bearings for zero play.
Blade drive with two-speed motor and special reducer with bronze gear and hardened, ground worm screw.
Adequately sized flywheels.
Robust blade guides with sealed guide bearings and adjustable carbide plates.
Blade tensioning through electromechanical device with micro-switch control for blade rotation.
Vice with quick-locking system
Safety devices on flywheel cover, control knob, and blade.
Cutting thickness 1.2 mm
Cutting range from 0 to 60° to the right
Adjustable stop for repetitive cuts
Low voltage (24 V) electrical system
0.06 kW electric pump for blade cooling
Gjdpfx Asfibfgsp Ieuc
The key features of this machine (blade support rigidity, flywheel sizing, blade guide and tensioning systems) have been thoroughly engineered to prevent blade fatigue, increase lifespan, and improve cutting straightness and cutting speed.
Mažas skelbimas
Austrija
945 km
Juostinis pjūklas - horizontalus
EPPLEEPPLE BS 275 G
Skambinti
Būklė: naudotas, Gamybos metai: 2000, Condition: Used
Year of manufacture: 2000
Stock number: 6253
Delivery time: immediate, subject to prior sale
Price: €1,900
Available: 1
Saw frame: Pivoting frame
Saw blade dimensions: 2480 x 0.9 x 27 mm
Blade speed: 45 / 90 m/min
Cutting capacity 0° round: 225 mm
Cutting capacity 0° flat: 180 x 245 mm
Cutting capacity 30° round: 100 mm, 100 x 100 mm
Cutting capacity 45° round: 160 mm, 160 x 160 mm
Working height: 935 mm
Motor: 1.1 kW
Length: 1500 mm
Width: 700 mm
Height: 1400 mm
Weight: 225 kg
Lowering by damping cylinder with control valve
Coolant system
Vise with quick-release lever
Roller conveyor 2000 mm with manual stop
3 spare blades
Operating manual in English with CE declaration of conformity
Gsdpfx Apjynmy Eo Ieuc
OPTIONS:
Additional roller conveyors and saw bands on request
BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE
We offer you maximum security and full transparency.
• HONEST INSIGHTS Detailed photos & functional videos of the current condition
• LIVE ON-SITE CHECK Live demonstration at our facility
• DIGITAL PRESENTATION Individual live video demonstration
• RISK-FREE PURCHASE 14-day return policy
Details:
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Austrija
945 km
Juostinis pjūklas - horizontalus
BIANCO280 M SA
Skambinti
Būklė: naudotas, Gamybos metai: 2023, Condition: used
Year of manufacture: 2023
Stock number: 6242
Delivery time: immediate, subject to prior sale
Country of origin: Italy
Price: €5,400
In stock: 1 unit
Gujdpfxswiqpze Ap Ioc
Saw frame: swiveling frame
Saw blade dimensions: 2450 x 27 x 0.9 mm
Blade speed: 35 / 70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° flat: 260 x 140 mm
Cutting capacity 45° round: 160 mm, square: 155 mm
Cutting capacity 60° round: 95 mm, square: 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
Demonstration machine / as new condition
Net price (original price €6,730.00)
Manual vice with quick-clamping lever
Descent by own weight with adjustable damper
2 speeds
Coolant system
OPTIONS:
Roller conveyors and saw bands available on request
BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE
We offer you maximum safety and complete transparency.
• HONEST INSIGHTS: Detailed photos & functional videos showing actual condition
• ON-SITE LIVE CHECK: Live demonstration at our premises
• DIGITAL DEMONSTRATION: Individual live demo via video call
• RISK-FREE PURCHASE: 14-day return policy
Details:
Mažas skelbimas
Bitburg
1 305 km
Hidraulinis pasukamas rėmo metalo juostinis pjūklas
METALLKRAFTBMBS 220 x 250 H-G - sofort verfügbar -
Skambinti
Būklė: naujas, Gamybos metai: 2026, For sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials
Two-pole drive motor enables band speeds of 30 and 65 m/min
Saw blade tension is monitored electromechanically via a microswitch
When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking on the cylinder required
Saw arm inclined by 25°, resulting in longer blade service life
Precise and robust blade guides with adjustable carbide plates
After completion of the cutting process, the saw band stops automatically in the lower end position
Saw arm lowering by gravity or manually
Infinitely variable, constant saw arm lowering speed via hydraulic cylinder
Gujdpfx Apog U Uv Rj Iec
Dimensions and weights
Length approx. 1200 mm
Width/depth approx. 650 mm
Height approx. 1800 mm
Weight approx. 270 kg
Electrical data
Connection voltage: 400 V
Mains frequency: 50 Hz
Machine data
Saw band speed(s): 30 / 65 m/min
Speed settings: 2
Saw band length: 2450 mm
Saw band width: 27 mm
Saw band thickness: 0.9 mm
Material feed
Material feed table height: 925 mm
Cutting capacities
0° round (tube): 220 mm
0° round (solid material): 120 mm
0° rectangular horizontal (hollow profile): 230 x 150 mm
0° bundle (tube): 230 x 120 mm
-45° round (tube): 160 mm
-45° round (solid material): 85 mm
-45° rectangular horizontal (hollow profile): 160 x 90 mm
-60° round (tube): 90 mm
-60° round (solid material): 55 mm
-60° rectangular horizontal (hollow profile): 90 x 90 mm
Art. No.: 3680001
Location: Ex stock 54634 Bitburg
- Immediately available -
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS912N
Skambinti
Būklė: naujas, Gamybos metai: 2026, CORMAK BS912N BAND SAW
Guedpfx Asy En E Ssp Isc
Specification:
- The material to be cut can be fed manually or by any mechanical device. The feed of the cutting tool is automatic.
- The arm's descent speed is controlled via a hydraulic cylinder. The desired speed is achieved by adjusting the oil flow between the cylinder chambers using a regulating valve.
- The required linear speed of the blade is obtained by changing the pulley ratio between the worm gearbox and the drive motor. A coolant tank with an electric pump is installed in the base.
- The precision and robust construction make this saw a leading band saw in its class, with a large cutting capacity of up to 230 mm and an adjustable cutting angle from 0 to 45 degrees.
- The CORMAK BS912N band saw, thanks to its innovative enhancements and quality bimetal blades from reputable manufacturers, is widely used in all metalworking shops where precision, quality, accuracy, and cutting speed are important.
- The cutting angle is set using a swiveling vise within a 0 - 45° range.
- The massive vise walls are made from durable cast iron. An angle scale is located at the rear of the vise for easy and quick cutting angle settings.
- Both blade guides are equipped with a cooling system that delivers coolant directly to the blade and the workpiece.
- This model is equipped with a convenient blade tensioning handle and a quick-release vise clamp for securing the workpiece.
- The saw arm houses a blade tension indicator and a selection table for blade pitch and cutting speeds according to the type of steel being cut.
- In the arm's lower position (after the cut is completed), the blade drive automatically switches off via a new-generation limit switch.
- Safe operation during the cutting process is ensured by an electrical system that fully meets all CE requirements. The machine has a limit switch that stops the machine when cutting is finished, an emergency stop 'mushroom' button, and several micro-switches that cut power if the belt guard or blade guard is opened.
- Additionally, our model is fitted with a wire brush for cleaning the blade of chips, preventing blade clogging and ensuring more effective cutting.
- The blade guides feature special carbide inserts and bearings, significantly improving blade tracking, longevity, straightness, accuracy, and quality of cuts.
- Carbide guidance greatly reduces wear on both the machine and the blade itself.
- The arm is made of profiled spheroidal cast iron, ensuring rigidity during operation and absorbing all types of vibrations.
- The control panel is located on the arm of the saw.
Technical Data:
Motor
230V~, 50Hz, 1100W
400V~, 50Hz, 1100W
Blade dimensions: 2655x27x0.9 mm
Blade speeds: 24/36/49/71 m/min
Cutting angle range: 0 to +45 degrees
Machine packaging dimensions: 1420x500x1150 mm
Weight: 151/202 kg
INSTRUCTIONS IN ENGLISH
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKMCB350HD
Skambinti
Būklė: naujas, Gamybos metai: 2026, CORMAK MCB350HD Bandsaw is the largest machine in its class, offering exceptional cutting capacity of 350x260 mm. It has been fitted with a more powerful motor and an ergonomic control panel. The saw arm is made from a solid cast iron casting with additional ribbing for increased rigidity. Double-sided miter cutting from -45° to +60°.
Machine Features
The CORMAK MCB350HD metal band saw with CE certification enables perpendicular cutting to the material axis or at any angle from -45° to +60°. The workpiece can be fed manually or via any feeding device. The feed during cutting is gravity-driven, utilizing oil flow in a dual-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After completing the cut, the machine stops automatically, and the operator manually lifts the arm to its starting position.
The vise is mounted on an adjustable bed and equipped with a quick-release clamp. The blade guides are fitted with hard metal carbide inserts and rolling bearing systems. Precisely guided carbide inserts are responsible for the cutting accuracy and straightness.
The arm features an automatic blade tension sensor and is inclined at 25 degrees to increase blade service life. A cleaning brush is mounted under the arm for optimal blade cleanliness and function. Power transmission is via an oil-filled worm gearbox. The machine is powered by a three-phase motor with a double winding and two cutting speeds.
Thermal protection for the motor. The saw offers a wide cutting angle range from 45º left to 60º right. Two band speeds: 32 and 72 m/min. The saw features automatic, steplessly adjustable, gravity-fed downfeed. Structure: arm, vise, and swivel table are made of cast iron. Enclosed coolant system with supply lines to the guides. The machine is fitted with a stop and ruler for setting the cutting length.
A feed roller is mounted to the rear of the machine for material support. Safety is ensured by an electrical installation compliant with all CE requirements. The machine is equipped with a limit switch that stops operation after cutting, an emergency stop ("mushroom" safety button), and multiple microswitches that turn off the machine if, for instance, the drive belt guard or blade cover is opened.
Technical Data
MINIMUM CUTTING DIAMETER - ø5 mm
MINIMUM WORKPIECE LENGTH IN VISE - 100 mm
DISTANCE FROM VISE BASE TO FLOOR - 940 mm
BLADE DIMENSIONS - 2950 x 27 x 0.9 mm
TOTAL POWER - 2.2 kW
BAND SPEED - 36 / 72 m·min-1
DRIVE / IDLER WHEEL DIAMETER - 330 mm
DIMENSIONS - 2000 x 1330 x 2020 mm
WEIGHT - 540 kg
Gusdpji D Di Sofx Ap Iec
ANGLE | ROUND | RECTANGLE | SQUARE
0º | ø270 | 350 x 240 | 260 x 260
45º R | ø230 | 230 x 150 | 210 x 210
45º L | ø200 | 200 x 170 | 170 x 170
60º R | ø140 | 140 x 140 | 140 x 140
Price listed is NET. Transport costs are not included.
For more information, please contact us by phone or email. We invite you to explore our full offer on our website.
Mažas skelbimas
Dreieich
1 172 km
Juostinis pjūklas - horizontalus
OPTIMUMS 275 NV
Skambinti
Būklė: naujas, Pjovimo skersmuo 225 mm
Gujdpfoy Ty Dpsx Ap Iec
Juostinio pjūklo ilgis 2480 mm
Didžiausias pjovimo plotis 245 x 150 mm
Įtampa 230 V
Variklio galia 1,5 kW
Juostinio pjūklo matmenys 2480 x 27 x 0,9 mm
Kampiniai pjūviai 0 - 60°
Pjovimo greitis 20 - 90 m/min
Mašinos svoris apie 185 kg
Užimama vieta apie 1,4 x 0,69 x 1,7 m
NAUJA MAŠINA
KAINA: 2 545,00 EUR + PVM
- bepakopis sukimosi greičio reguliavimas
- bepakopis padavimo greitis
- kampinė pjūtis
- bimetalinė pjūklo juosta
- medžiagos ribotuvas
- mašinos pagrindas
- aušinimo skystis
Mažas skelbimas
Feucht
1 073 km
Juostinės pjovimo staklės Stuermer
MetallkraftBMBS 230 x 280 H-DG
Skambinti
Būklė: naujas, Band saw machine
Make: METALLKRAFT
Model: BMBS 230 x 280 H-DG
Art. No.: 3680013
Condition: New machine
Cutting capacity (round): 230 mm
Cutting speed: 35/70 m/min
Standard equipment includes:
- Horizontal vice
- Length stop (600 mm)
- Electromechanical monitoring of saw blade tension
Guodpfx Ascuntzop Ioc
- Chip removal brush
- Coolant device
- Operating manual
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas HBS 275
BernardoHBS 275
Skambinti
Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: Nuolatinė srovė, Įranga: CE žymėjimas, The Bernardo HBS 275 model is one of the most renowned and highly regarded bandsaws in Europe. In its processing range, it is undoubtedly the best choice. This precision band saw is designed for universal applications—robust, rigid, and reliable. It features a swiveling arm for miter cuts up to 60°, a tensometer for blade tension, and a coolant system. Maximum cutting capacity is up to 225 mm (flat 245x150 mm).
Optimal blade tension adjustment thanks to a clock face tensometer.
Infinitely variable saw arm adjustment with a hydraulic cylinder equipped with a control valve.
Durable, robust quick-release vice.
Suitable for cutting solid and hollow materials made of various metals.
The 2-speed motor ensures optimal power selection for each task.
Double-bearing blade guides ensure impeccable blade tracking.
Robust frame and arm construction guarantee precise operation with minimal vibrations.
Automatic shut-off after completion of the cut (limit switch).
Technical specifications:
Round cutting capacity at 90°: 225 mm
Flat cutting capacity at 90°: 245 x 150 mm
Square cutting capacity at 90°: 200 x 200 mm
Round cutting capacity at 45° R: 160 mm
Square cutting capacity at 45° R: 160 x 160 mm
Round cutting capacity at 60°: 100 mm
Flat cutting capacity at 60°: 100 x 100 mm
Working height: 910 mm
Saw blade dimensions: 2480 x 27 x 0.9 mm
Blade width: 27 mm
Cutting speed: 45 / 90 m/min
Coolant system pump power: 0.1 kW
Motor power: 1.5 kW
Motor power S1 100%: 1.1 kW
Voltage: 400 V
Dimensions (W x D x H): 1430 x 720 x 1700 mm
Weight: approx. 190 kg
Scope of delivery:
Band saw
Gedpfx Asytr Hzsp Iouc
Workpiece stop
Base
Blade tensioning tensometer
Quick-release vice
Coolant system
Hydraulic cylinder
Motor emergency stop
Automatic limit stop
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS260G
Skambinti
Būklė: naujas, Gamybos metai: 2026, Horizontal band saw with a swiveling arm for cutting metals, capable of making cuts in a plane perpendicular to the axis of the material and at any angle from 0 to 60º. Material can be fed manually or with any mechanical feeder, paired with automatic tool feed. The saw blade guides feature dedicated carbide inserts and bearings, which greatly influence blade guidance, blade life, cutting straightness, precision, and cut quality.
The machine arm is made from profiled CAST IRON. The control panel is located by the arm. Power from the electric motor is transmitted to the band drive wheel via a worm gear motor. The band saw blade is tensioned on two cast iron wheels by a manual tensioner and guided by an adjustable rolling and linear carbide guide assembly. Inside, there is a separate coolant tank with an electric pump. The rate of arm descent (cutting speed) is regulated by a hydraulic cylinder. Feed speed is controlled via the control panel. Two blade speeds are available: 36 and 72 m/min. In the resting position of the arm (after the cutting process), the saw blade drive is automatically switched off. Safety is ensured by blade guards and microswitches that stop the motor after the cutting cycle or when any guard is opened; additional protection is provided by automatic shutdown of the band saw in the event of blade breakage.
Technical Data
Band Saw Dimensions
2455×27×0.9 mm
Blade Tensioning
Mechanical (manual)
Blade Speed
36, 72 m/min
Feed Speed
0–50 m/min (stepless adjustment)
Arm Descent Control
Stepless – hydraulic cylinder
Vise Base Height
900 mm
Power Supply
3-phase 400 V
Motor Power
1.1 kW
Net/Gross Weight
220 kg / 284 kg
Warranty
12 months
Manual
yes
CE Declaration
Gedpfx Aevuf S Nop Isuc
yes
Cutting Angles and Capacities:
0º
ø230
260×150
225×225
45º
ø165
180×130
165×165
60º
ø105
100×90
110×110
*Please note: the machine is supplied by default without a CEE connector, as there are many different types. If you would like one included with your unit, please contact the seller prior to purchase or at the time of ordering.
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKG5025
Skambinti
Būklė: naujas, Gamybos metai: 2026, Powerful, large metal bandsaw with a swiveling arm, enabling cuts both perpendicular to the axis of the workpiece and at any angle from -45° left to 60° right. This bandsaw is ideal for cutting pipes, profiles, and solid materials.
Product Features
Material can be fed manually or with any mechanical device, while the blade feed is automatic. The appropriate cutting speed (blade feed rate) is set via the control panel.
The arm is a rigid structure made of profiled cast iron. Drive is transmitted from the electric motor to the blade drive wheel by a maintenance-free worm gear motor. The saw blade is tensioned between two cast iron wheels using a manual tensioner and guided in adjustable carbide roller and sliding guides.
The base is a rigid housing welded from steel plates. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped as a tray to collect coolant and chips generated during the cutting process. The worktable, with a swiveling arm adjustable from -45° to +60°, is attached to the cast iron construction base.
The control panel is mounted on a separate arm. During cutting, the main cutting motion is the movement of the bandsaw blade. The arm's downward speed (cutting speed) is adjusted by a hydraulic cylinder. The feed rate can be set from the saw's control panel.
Two blade speeds are available: 36 and 72 m/min. At the bottom position of the arm (after cutting is completed), the blade drive is automatically switched off. Safety is assured by blade covers and micro-switches that stop the motor after the cutting cycle or if any cover is opened. Additional protection consists of automatic shutdown if the blade breaks.
Technical Specifications
Cutting blade size [mm]: 2715 x 27 x 0.9
Blade tension: mechanical (manual)
Blade speeds [m/min]: 36, 72
Arm descent control: stepless - hydraulic cylinder
Vise base height [mm]: 765
Minimum workpiece length in vise [mm]: 100
Power supply: 3-phase 400V
Total power [kW]: S1 100%: 1.5; S6 40%: 2.1
Coolant pump motor power [kW]: 0.025
Weight [kg]: 370
Warranty [months]: 12
User manual: Polish
CE Declaration: yes
Cutting Capacity
Gujdpfx Apei D Ddie Iec
| Angle | Round [mm] | Rectangular [mm] | Square [mm] |
|-----|-----|-----|-----|
| 0° | ø250 | 310 x 210 | 240 x 240 |
| 45° R | ø200 | 200 x 140 | 180 x 180 |
| 45° L | ø165 | 185 x 145 | 160 x 160 |
| 60° R | ø120 | 120 x 95 | 100 x 100 |
The price quoted is NET. Price does not include shipping costs.
For more information, please contact us by phone or email. We invite you to explore our offer on our website.
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKHBS260
Skambinti
Būklė: naujas, Gamybos metai: 2026, CORMAK HBS260 bandsäge zum Schneiden von Rohren, Profilen und Stangen wird in allen Schlossereibetrieben eingesetzt, bei denen Präzision, Qualität und Schnittgeschwindigkeit wichtig sind. Das Modell verfügt über einen schwenkbaren Arm von 0-60°. Die Rahmenkonstruktion sorgt für einen präzisen und leisen Betrieb. Sie verfügt über eine herausnehmbare Spänewanne für eine einfache Reinigung!
Maschineneigenschaften
Die horizontale Metallbandsäge mit schwenkbarem Arm ermöglicht das Schneiden in einer zur Achse des Werkstücks senkrechten Ebene sowie in jedem Winkel zwischen 0 und 60°. Das zu schneidende Material kann manuell oder mit jedem mechanischen Vorschub zugeführt werden, der Werkzeugvorschub erfolgt automatisch. Die Bandführungen sind mit speziellen Hartmetallplatten und Wälzlagern ausgestattet. Dies wirkt sich entscheidend auf die Bandführung, deren Lebensdauer, Geradheit, Präzision und Schnittqualität aus. Die Hartmetall-Führung minimiert den Verschleiß der Maschine und des Sägeblatts. Die Maschine ist mit einer leistungsstarken Kühlmittelpumpe mit geschlossenem Kühlkreislauf ausgestattet.
Der durchgehende Gusssägearm in Kombination mit dem 27 mm breiten Sägeband ermöglicht Serienkopfschnitte von Profilen und Vollmaterialien. Der Schraubstock befindet sich auf einer einstellbaren Basis und ist mit einer Schnellspannvorrichtung ausgestattet. Die Bandführungen sind mit Hartmetallplatten (gesinterte Hartmetalle) und Rollsystem ausgestattet. ZENTRIERTE HARTMETALLFÜHRUNGEN sorgen für die Präzision und Geradheit des Schnitts.
Die Form des oberen Gestellbereichs dient als Wanne zur Aufnahme von Kühlmittel und Spänen, die beim Schneiden entstehen. Ein Gusseisentisch mit schwenkbarem Arm sowie ein Bedienfeld auf einem separaten Arm sind am Grundkörper befestigt. Während des Schneidvorgangs ist die Bewegung des Sägebands sowie der Absenkvorgang des Arms die Hauptschnittbewegung. Die Absenkgeschwindigkeit des Arms (Schnittgeschwindigkeit) wird durch einen Hydraulikzylinder geregelt.
Die Vorschubgeschwindigkeit lässt sich am Bedienfeld einstellen. Es sind zwei Schnittbandgeschwindigkeiten wählbar: 35 und 70 m/min. In der unteren Armstellung (nach Beendigung des Schnitts) wird der Bandantrieb automatisch abgeschaltet. Die Sicherheit wird durch Bandabdeckungen und Mikroschalter gewährleistet, die den Motor nach Abschluss des Schnittzyklus oder beim Öffnen einer Abdeckung stoppen. Zusätzlich sorgt eine automatische Abschaltung der Maschine beim Bandriss für Schutz.
Schnittbandmaß [mm]: 2520 x 27 x 0,9
Bandspannung: mechanisch (manuell)
Bandgeschwindigkeiten [m/min]: 35, 70
Einstellbarer Armabwurf: stufenlos – Hydraulikzylinder
Guodpfx Apemrnk Es Ioc
Schraubstockhöhe [mm]: 860
Sägeraddurchmesser [mm]: 300
Sägerahmenschwenkung [°]: 0-60
Stromversorgung: 3 Phasen 400V
Hauptmotorleistung [kW]: 1,1/1,5
Kühlmittelpumpenleistung [kW]: 0,05
Abmessungen inkl. Sockel [cm]: 150x80x140
Gewicht [kg] brutto/netto: 210 / 180 kg
*Bitte beachten Sie, dass die Maschine serienmäßig ohne CEE-Stecker geliefert wird, da es verschiedene Ausführungen gibt. Sollten Sie den Stecker wünschen, geben Sie dies bitte vor dem Kauf oder während des Bestellvorgangs beim Verkäufer an.
Der Preis ist ein Nettopreis. Versandkosten sind nicht im Preis enthalten.
Für weitere Informationen kontaktieren Sie uns bitte telefonisch oder per E-Mail. Wir laden Sie ein, sich mit unserem Angebot auf unserer Webseite vertraut zu machen.
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKS-200R manual
Skambinti
Būklė: naujas, Gamybos metai: 2026, PREMIUM LINE Series Machine.
Cormak S200R Manual Bandsaw for industrial applications. This metal-cutting bandsaw features high cutting accuracy, ensured by a robust cast iron rotating table synchronized with a pivoting arm. The bandsaw is designed for use in large industrial facilities, capable of operating 16h/24h. Cutting angles range from -45º to the left up to 60º to the right.
Machine Features
The CORMAK S-200 R MANUAL bandsaw (CE-compliant) enables perpendicular cutting relative to the axis of the material or miter cutting at any angle from -45° to +60°. The workpiece can be fed manually or by any automated feeding device.
The cutting feed operates by gravity via an oil flow through a dual-chamber hydraulic cylinder. The appropriate arm descent speed is achieved using a valve regulating oil flow between chambers. The operator starts the machine by pressing the start button and sets the cutting speed. Upon finishing the cut, the machine stops automatically, and the operator manually lifts the arm to the starting position. Material feeding is manual.
The vise is mounted on an adjustable bed and features a quick-clamp system. Blade guides are equipped with carbide inserts and roller bearings, where the CARBIDE BLADE GUIDES are responsible for high cutting precision and straightness. The arm features an automatic blade tension sensor and is inclined by 25 degrees, extending blade life. A cleaning brush is mounted under the arm for optimal blade cleanliness and function.
The machine’s drive is transmitted through a worm gearbox filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds.
Thermal overload protection on the motor. The saw offers two blade speeds: 35 and 70 m/min. Construction: the arm, vise, and rotary table are all cast iron.
The machine features a closed-loop coolant system. It is supplied with a stop and ruler for precise length adjustment of the workpiece. The machine base is a rigid steel sheet cuboid, housing a coolant tank with a pump system.
Safety during operation is ensured by an electrical system meeting all CE requirements. The machine is equipped with a limit switch that stops the machine after each cutting cycle, an emergency stop button (“mushroom” type), and multiple micro-switches that disable operation, e.g., when the belt or band covers are open.
Technical specifications:
TYPE: gravity fed
ARM LIFT/DROP: gravity with stepless arm descent adjustment
BLADE SPEED: 36/70 m/min
MITER CUTTING RANGE: left 45° to right 60°
VISE: manual
MINIMUM CUTTING DIAMETER: Ø 5 mm
MINIMUM MATERIAL LENGTH IN VISE: 30 mm
Guodpfjfy Ttiox Ap Ijc
VISE BASE HEIGHT: 890 mm
BLADE SIZE: 27x0.9x2910 mm
TOTAL POWER: 2.1 kW
DIMENSIONS (LxWxH): 1600 x 800 x 1400 mm
WEIGHT: 500 kg
Maximum cutting capacity [mm]:
Angle
0º ø250 320 x 240 240 x 240
45º L ø200 220 x 120 190 x 190
45º R ø220 235 x 120 210 x 210
60º R ø110 155 x 110 100 x 100
For more information, please visit our website.
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS712SW 20mm 230V
Skambinti
Būklė: naujas, Gamybos metai: 2026, Profesjonalna, bardzo mocna i wydajna piła taśmowa do metalu z obrotowym ramieniem 45°. Idealne rozwiązanie dla zakładów ślusarskich, produkcyjnych oraz warsztatów rzemieślniczych. Od wielu lat nie ma sobie równych – jej konstrukcja i solidne wykonanie czynią ją perfekcyjnym wyborem.
Opis maszyny
Gujdpfxsmtwkts Ap Ijc
Profesjonalna, bardzo mocna i wydajna piła taśmowa do metalu z ramieniem obrotowym 45°, model CORMAK BS 712 SW, oparta jest na dopracowanych rozwiązaniach, które czynią ją bezkonkurencyjną w swojej klasie.
Ramię wykonane z odlewu żeliwa sferoidalnego zapewnia sztywność podczas pracy i skutecznie tłumi wszelkie drgania. Panel sterowania znajduje się na ramieniu przecinarki. Maszyna charakteryzuje się wysoką wydajnością i prostą obsługą. Umożliwia cięcie w płaszczyźnie pionowej oraz w płaszczyźnie prostopadłej do osi ciętego materiału, a także pod dowolnym kątem w zakresie 45° – 90°. Obrabiany element można podawać ręcznie lub za pomocą dowolnego urządzenia podającego. Posuw podczas cięcia odbywa się grawitacyjnie, w oparciu o zasadę przepływu oleju w dwukomorowym siłowniku hydraulicznym. Odpowiednią prędkość opuszczania ramienia uzyskuje się dzięki zaworowi sterującemu przepływem oleju między komorami siłownika.
Solidna, stabilna i precyzyjna konstrukcja oraz ramię wykonane z jednorodnego żeliwa gwarantują wysoką sztywność i stabilność podczas cięcia, co przekłada się na precyzję i wieloletnią niezawodność. Konstrukcja piły taśmowej o szerokości 20 mm umożliwia obróbkę dużych ilości materiału. Wymaganą prędkość liniową taśmy uzyskuje się poprzez zmianę przełożenia na kole pasowym między przekładnią ślimakową a silnikiem napędowym.
Dane techniczne
Moc silnika: 1,1 kW
Prędkości taśmy: 22/33/45/65 m/min
Zasilanie: 230V
Wymiary taśmy: 2360×20×0,9 mm
Zakres cięcia: 45°L – 45°P
Waga: 145 kg
Wymiary: 1280x575x1140 mm
Kąty / Wydajność cięcia:
0°.....Ø 205.....215×205.....205×205
45° L.....Ø 150.....100×200.....130×130
45° P.....Ø 140.....140×90.....90×90
Podana cena jest ceną netto. Cena nie obejmuje kosztów transportu.
W celu uzyskania dodatkowych informacji prosimy o kontakt telefoniczny lub mailowy. Zapraszamy również do zapoznania się z pełną ofertą na naszej stronie internetowej.
Mažas skelbimas
Sonneberg
1 008 km
Juostinis pjūklas
LeserMS 240
Skambinti
Būklė: geras (naudotas), Cutting capacity 90° round: 240 mm
Guedpfx Apjimqt Ae Isc
Square approx.: 260 x 180 mm
Saw blade:
Cutting speeds:
Fixed vice jaw: 310 x 110 mm
Movable vice jaw: 190 x 110 mm
Opening: 270 mm
Features: mobile
Condition: good
Connection: 1.1 kW
Weight: 230 kg
Dimensions: 1,400 x 800 x 1,300 mm
Mažas skelbimas
Vokietija
999 km
Juostinis pjūklas - horizontalus
ZIMMERZ 252 / DG
Skambinti
Būklė: naujas, Cutting capacity at 90 degrees: round 240 mm
Cutting capacity at 90 degrees: square 240 mm
Cutting capacity at 90 degrees: rectangular 165 x 310 mm
Saw blade length: 2725 x 27 x 0.9 mm
Table height: 890 mm
Band speed: 35 / 70 m/min
Total power requirement: 1.1 kW
Machine weight: approx. 0.35 t
Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m
The Z252/DG is equipped with the following features:
- Hydraulic cylinder
- Coolant pump
- Eccentric vice
- Base frame
Gsdpjhpktvsfx Ap Isuc
- Saw blade
- 400V plug (16A)
The machine is delivered fully assembled and ready for immediate operation.
Mažas skelbimas
Kanal
1 241 km
Juostinis pjūklas
MACCSpecial 650DI
Skambinti
Būklė: naudotas, Gamybos metai: 2007, Naudota pusiau automatinė juostinė pjovimo staklės MACC special 650di
Pjovimo kampas nuo -60° iki +60°
Ašmenų matmenys: 5270 x 34 x 1,1 mm
Skaitmeninis kampo indikatorius
Pjovimo talpa ties 0° - apvalus 460 mm - kvadratas 450x450 mm - stačiakampis 620x450 mm
Įrenginio svoris: 1250 kg
Godpoyzadljfx Ap Iouc
Įrenginys visiškai aptarnautas.
Mažas skelbimas
Austrija
945 km
Juostinis pjūklas - horizontalus
BIANCO370 M DS MS SA
Skambinti
Būklė: naujas, Būklė: nauja
Pristatymo laikas: apie 10 savaičių nuo užsakymo
Kilmės šalis: Italija
Kaina: 10 370 €
Lizingo įmoka: 199,1 €
Pjūklo rėmas: pasukamas rėmas
Pjūklo juostos matmenys: 3120 mm
Juostos greitis: 35/70 m/min
Gujdpfxeynmq Do Ap Ioc
Pjovimo našumas 0° apvali: 280 mm
Pjovimo našumas 0° kvadratinė: 240 mm
Pjovimo našumas 0° plokščia: 350x140 mm
Pjovimo našumas 45° apvali: 230 mm, kvadratinė: 200 mm
Pjovimo našumas 60° apvali: 150 mm, kvadratinė: 130 mm
Pjovimo našumas -45° apvali: 200 mm, kvadratinė: 170 mm
Darbinis aukštis: 830 mm
Ilgis: 1550 mm
Plotis: 1400 mm
Aukštis: 1750 mm
Svoris: 420 kg
Rankinis spaustuvas su greito fiksavimo svertu
Nuleidimas pagal savo svorį su reguliuojamu amortizatoriumi
2 greičiai
Aušinimo sistema
Skaitmeninis ekranas kampiniams pjūviams
PASIRINKTINAI:
Voleliai ir pjūklo juostos pagal užklausą
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Austrija
945 km
Juostinis pjūklas - horizontalus
BIANCO420 M DS MS SA
Skambinti
Būklė: naujas, Būklė: nauja
Pristatymo laikas: apie 10 savaičių nuo užsakymo
Kilmės šalis: Italija
Kaina: 11 070 €
Lizingo įmoka: 212,54 €
Pjūklo rėmas: pasukamas rėmas
Juostos pjūklo matmenys: 3270x27x0,9 mm
Juostos greitis: 35/70 m/min
Pjovimo galimybės 0° apvalus: 280 mm
Pjovimo galimybės 0° kvadratinis: 240 mm
Pjovimo galimybės 0° plokščias: 420x200 mm
Pjovimo galimybės 45° apvalus: 260 mm, kvadratas: 240 mm
Pjovimo galimybės 60° apvalus: 170 mm, kvadratas: 160 mm
Pjovimo galimybės -45° apvalus: 200 mm, kvadratas: 180 mm
Darbinis aukštis: 830 mm
Ilgis: 1600 mm
Plotis: 1400 mm
Aukštis: 1800 mm
Gedpjynmqwsfx Ap Ieuc
Svoris: 438 kg
Rankinis spaustuvas su greito prispaudimo svirtimi
Nuleidimas savo svoriu su reguliuojamu amortizatoriumi
2 greičiai
Aušinimo skysčio sistema
PASIRINKTINAI:
Ritinėlių bėgiai ir pjovimo juostos pagal užklausą
Mažas skelbimas
Werdau
913 km
Rankinė juostinė pjovimo staklės
Bomareasycut 275.230 DG
Skambinti
Būklė: naujas, Manual band saw / self-lowering with double-sided miter capability
Cutting capacity:
90° round: 230 mm / flat: 275 x 230 mm / square: 230 mm
45° right round: 195 mm / flat: 190 x 190 mm / square: 190 mm
45° left round: 170 mm / flat: 185 x 150 mm / square: 150 mm
60° right round: 120 mm / flat: 120 x 85 mm / square: 85 mm
Material support height: 760 mm
Saw blade dimensions: 2720 x 27 x 0.9 mm
Cutting speed: 40/80 m/min
Drive power: 1.1/1.5 kW // 400V // 50 Hz
Minimum diameter: 5 mm
Dimensions (L x W x H): 1600 x 1150 x 1477 mm
Weight: 370 kg
- Option to add minimum quantity lubrication system at extra cost.
- Suitable roller conveyor and material stops available.
Guodpjdx Nf Hsfx Ap Isc
Mažas skelbimas
Werdau
913 km
Horizontali pusiau automatinė juostinė pjūklas
Bomarergonomic 320.258 DGH
Skambinti
Būklė: naujas, Semi-automatic metal band saw with high cutting accuracy. This machine allows for 90° cuts, as well as mitre cuts—stepless adjustment—left up to 45° and right up to 30° (pivot range: left 45°, right 60°).
Standard features:
- Large, rotatable support table with zero wear! (The saw band’s cutting channel rotates with the mitre setting)
- Band tension indicator
- Hydraulic control of the cast iron saw arm
- Hydraulic clamping of the workpiece via short-stroke cylinder
- Saw frame height limitation via potentiometer from the control panel
- Hydraulic cutting pressure regulation (solid material – tubing)
- Lowering of the saw arm via hydraulic cylinder; infinitely adjustable
- Easy, manual sliding of the vice left/right
- Electric band tension monitoring with saw band break detection
- Coolant pump with dual supply to saw band guides
- Carbide saw blade guides and guide rollers
- Bi-metal saw blade M 42
- Chip brush
Technical Data
● Cutting capacity:
90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm
45° R round 220 mm / flat 230 x 210 mm / square 210 x 210 mm
45° L round 180 mm / flat 205 x 160 mm / square 160 x 160 mm
30° R round 130 mm / flat 130 x 105 mm / square 105 x 105 mm
● Drive rating: 1.5 kW // 400V // 50 Hz
● Total connected load: 3.35 kVA
● Band speed: 20–120 m/min, infinitely variable
Gedpjctgkzefx Ap Iouc
● Saw band dimensions: 2910 x 27 x 0.9 mm
● Remnant length: 20 mm
● Smallest diameter: 5 mm
● Material support height: 775 mm
● Dimensions: 1700 x 1480 x 2000 mm
● Weight: 410 kg
Price on request!
Mažas skelbimas
Enschede
1 168 km
Juostinis pjūklas
GEORGECY300N
Skambinti
Būklė: naujas, Gamybos metai: 2025, – 2 greičiai
– Dvigubas įstrižas pjūvis
– Hidrauliškai reguliuojamas pjovimo slėgis
– Greito tvirtinimo įtaisas
– Aušinimas
– Automatinis išsijungimas
– Avarinis stabdis
– Dokumentacija
Gjdpfx Aoyhh Tajp Isuc
– 400V
Mes supaprastiname jums paiešką
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota horizontalios juostinės pjūklai – rankiniai – apvali pjovimo sritis 221–299 mm (70)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo

















































































































































































