Horizontalios juostinės pjūklai – rankiniai – apvali pjovimo sritis 221–299 mm pirkti naudotą (81)

Sąlyga: naujas, Gamybos metai: 2025, S275 metal cutting machine Motor Type: Three-phase induction motor Connection: 400 V 50/60 Hz Power supply: 400 V (three-phase) Protection class: IP54 Power: 1.5 HP (1.1 kW) Rated current: 400 V (3.6 A) Speed (rpm): 50 Hz: 2840/1420 Gearbox: Transmission ratio: 50 Hz: 1:30 Bandsaw Blade dimensions: 2480 x 27 x 0.9 x 6–10 mm Blade guide wheel diameter: 293 mm Blade speed: 50 Hz: 45/90 m/min Coolant Pump: Type: 230 V, 100 W Rated current: 0.3 A Speed: 50 Hz: 2840 rpm Tank capacity: 10 liters Mechanical Data Dimensions with base: 1560 x 990 x 1665 mm Dimensions without base: 1320 x 510 x 755 mm Shipping dimensions: 1380 x 570 x 890 mm Hpjdpfxexdbzbe Ad Dja Weight: Net: 185 kg | Gross: 200 kg Noise level: 70 dB Fuse: max. 16 Amps Ambient temperature: 5–35 °C Air humidity: 25–80 % General: Cutting angle adjustment: via swivel arm Saw blade guide: ball bearing guide rollers Saw arm lift: manual Feed: steplessly adjustable Blade tension: manual via handwheel Blade guides with bearings and carbide plates Height from floor to vice: 910 mm

Sąlyga: naujas, Būklė: nauja Hsdpfxjwirpve Ad Depa Pristatymo laikas: apie 10 savaičių nuo užsakymo Kilmės šalis: Italija Kaina: 8680 € Lizingo įmoka: 167,52 € Pjūklo rėmas: pasukamas rėmas Juostinio pjūklo matmenys: 3120x27x0,9 mm Juostos greitis: 35/70 m/min Pjovimo našumas 0° apvalus: 280 mm Pjovimo našumas 0° kvadratas: 240 mm Pjovimo našumas 0° plokščias: 370x140 mm Pjovimo našumas 45° apvalus: 225 mm, kvadratas: 215 mm Pjovimo našumas 60° apvalus: 140 mm, kvadratas: 140 mm Darbinis aukštis: 830 mm Ilgis: 1550 mm Plotis: 1400 mm Aukštis: 1900 mm Svoris: 353 kg Rankinis prispaudėjas su greito užspaudimo svirtimi Nuleidimas dėl savo svorio su reguliuojamu slopintuvu 2 greičiai Aušinimo skysčio sistema PASIRINKTINAI: Voleliniai takeliai ir pjūkleliai pagal užklausą

Sąlyga: naujas, Cutting diameter: 240 mm Saw band length: 2730 mm Cutting width: 270 mm Cutting speed: 37 + 74 m/min Saw blade dimensions: 2730 x 27 x 0.90 mm Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangular: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangular: 200 x 210 mm Cutting capacity at 60° round: 130 mm Hsdpfjhhzl Hex Ad Dspa Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight approx. 0.3 t Space requirement approx. 1.6 x 1 x 1.7 m High-quality metal band saw with two cutting speeds, mitre cuts up to 60°, automatic coolant system, and AutoCut feed system – suitable for cutting solid materials and profiles. Features: * High-quality construction and equipment for premium cutting results * Suitable for cutting solid materials and profiles made from steel, stainless steel, and aluminium * Mitre cuts up to 60 degrees to the left * Two-stage adjustable saw band speed * Frame and gearbox cast in one piece for very quiet and low-vibration operation * Easy-to-use, clear angle adjustment with scale * Quick-release vice with lever for easy handling * Length stop * Carbide saw band guides * Electrical monitoring of band tension, breakage, and blade cover – the saw operates only if safety functions are OK * Ergonomic industrial handle * Automatic electric coolant system * AutoCut system with hydraulic cylinder, feed control, spring package, and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut System: * Automatic saw frame lowering via hydraulic cylinder with infinitely variable feed adjustment and shutdown at the end of the cut * Quick lowering of the saw frame from rest position to the workpiece, then switch to normal feed (e.g., for marking) * Manual operation: hydraulic cylinder functions as a brake cylinder (e.g., for notching). The brake cylinder allows the saw to be positioned at any point during return stroke.

Sąlyga: paruoštas naudoti (naudotas), Bomar automatinė juostinė pjūklas labai geros būklės Pjaunamoji galia: Apvalus: 250 mm Kvadratas: 250x250 mm Stačiakampis: 290x250 mm Pjovimo greitis: 40-80 m/min Matmenys: 1750x1250x1470 mm Hpodpfx Adjxur Exo Dsa Svoris: 640 kg Pridedama 6 atsarginių juostinių pjūklų geležčių ir vartotojo vadovas Programiniu būdu valdomas vamzdžių, strypų, kvadratų, pilnavidurių bei kampuočių pjovimas

Sąlyga: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.4 t The Z252/DGH is equipped with the following features: - Hydraulic semi-automatic operation - Double mitre 60° left / 45° right - Emulsion pump - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. Hjdefgyh Hjpfx Ad Dopa

Sąlyga: naudotas, Gamybos metai: 1991, mašinos/transporto priemonės numeris: 1430 91, Technical Data Cutting diameter: 260 mm Saw band length: 3660 mm Cutting width: 0.9 mm Cutting range - square: 260 x 260 mm Feed length: 500 mm Feed length, multiple: 5,999 mm Cutting speed: 17 - 106 m/min Saw blade dimensions: 3660 x 25 x 0.9 mm Saw motor: 1.5 kW Total power requirement: 2 kW Machine weight approx.: 1.05 t Machine dimensions (L x W x H): 1.75 x 1.80 x 1.15 m Accessories: Hpodpew Eua Asfx Ad Dsa Coolant Information according to manufacturer

Sąlyga: naujas, Gamybos metai: 2024, * Manual cutting cycle * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustment of cutting pressure via compensation spring * Stable, torsion-resistant and low-vibration saw frame made of cast steel * Large, easily adjustable and mounted rotary table, rotary table centered by central axis pin with indexing at 0° / 45° / 60° and internal table locking for intermediate angles * Quick-release vice * Carbide band guides for maximum cutting precision * Hydraulic unit for saw band tensioning and monitoring, with indicator on the pressure gauge * Clearly arranged control panel with all operating elements * Base frame, coolant tray, coolant pump, swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw band dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm Hodpfoftmxvjx Ad Dspa * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm * Cutting capacity at 60 degrees: square 80 mm * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 / right mm * Cutting capacity at 45 degrees: square left 200 / right 170 mm * Machine weight: approx. 0.4 t * Space requirement: approx. 1.8 x 1.3 x 1.8 m

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Manual high-performance metal bandsaw with selectable manual or hydraulic saw frame descent. In autonomous operation, the lowering speed is infinitely adjustable via a 'Push&Pull' control. By pulling the control, the frame holds the preset speed and does not need to be readjusted for subsequent cuts. Standard Features: - Saw frame in robust cast construction - Massive roundtable with cutting channel for mitre cuts from 0°–60° right and 0°–45° left - Adjustable vice with adjustable guide rails and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze worm gear and precision-ground, hardened steel worm - Electric coolant pump for saw band lubrication and cooling - Mechanical saw band tensioning with electric band monitoring - Precise band guidance via adjustable, ground carbide plates and ball bearings - 'Push&Pull' controller for stepless adjustment of the descent speed - Rotating chip removal brush - Precision angle scale for angles from 60° right to 45° left - Control cabinet with operation readiness indicator, main/speed switch, and selector switch for manual or autonomous descent - Emergency stop button at knee height for optimal accessibility - Microswitch in handle for motor and pump start; 'dead man’s control' function in manual mode - Safety switch on saw frame guard and band tension sled - Limit switch for motor shut-off after cutting process - Length stop for repeat cuts - Material support on infeed side - Bi-metal saw blade - Tools and operating manual Technical Data: * Pole-reversible 400 V three-phase motor, 1.1/1.5 kW * 2 cutting speeds (33/66 m/min) * Vice clamping width: 305 mm * Working height: 940 mm Hjdpsxcnqajfx Ad Djpa * Saw blade dimensions: 2750x27x0.9 mm * Weight: 380 kg Cutting range in mm: 90° 255 250x250 300x200 45° right 190 180x180 190x170 60° right 110 110x110 150x110 45° left 160 140x140 170x120

Sąlyga: naujas, Cutting diameter 280 mm Hodoivuqtjpfx Ad Dspa Bandsaw blade length 3370 mm Cutting width 350 mm Bandsaw blade dimensions 3370 x 27 x 0.9 mm Cutting capacity at 90° round 280 mm Cutting capacity at 90° square 250 mm Cutting capacity at 90° rectangular 350 x 200 mm Cutting capacity at 45° round 240 mm Cutting capacity at 45° square 220 mm Cutting capacity at 45° rectangular 230 x 220 mm Cutting capacity at 60° round 170 mm Cutting capacity at 60° square 150 mm Cutting capacity at 60° flat 170 x 100 mm Bandsaw blade speed 37 + 74 m/min Total power requirement 1.8 kW Machine weight approx. 0.6 t Space requirements approx. 1.5 x 1.7 x 2.0 m

Sąlyga: naudotas, Gamybos metai: 1992, Cutting diameter 260 mm Saw band length 3890 mm Cutting width 340 mm Cutting speed stepless m/min Total power requirement 2.4 kW Machine weight approx. 1.5 t Hpjdpfx Adsu Rt Hdj Dea Space requirement approx. 2.5 x 1.4 x 2.0 m Clamping jaws of the vise can be set for mitre cuts.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Hpodpfx Adohpktvj Dea The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Sąlyga: naujas, Semi-automatic bandsaw with double-sided mitre cutting R/L 60° Including hydraulic blade tension indicator Minimum quantity lubrication system retrofittable Cutting capacity 90° round: 280 mm / flat: 410 x 280 mm / square: 280 mm 45° R round: 280 mm / flat: 310 x 150 mm / square: 270 mm 45° L round: 280 mm / flat: 330 x 100 mm / square: 280 mm 60° R round: 210 mm / flat: 205 x 100 mm / square: 190 mm 60° L round: 220 mm / flat: 225 x 100 mm / square: 210 mm Hsdpsd Dpzgjfx Ad Dspa Material support height: 756 mm Saw blade dimensions: 3800 x 0.9 x 27 mm Cutting speed: 20–120 m/min Drive power: 2.2 kW Dimensions (LxWxH): 2130 x 1070 x 1440 mm Weight: 530 kg Price on request

Sąlyga: naujas, Model designation Shark 282 CCS Hsdpsgvkbcjfx Ad Djpa

Sąlyga: naudotas, Gamybos metai: 2020, Cutting diameter 250 mm Saw band length 3100 x 27 x 0.9 mm Cutting range at 90 degrees: square 220 mm Cutting range at 90 degrees: flat 280 x 190 mm Hodpfxswkvq Hj Ad Dopa Band speed 37 / 74 m/min Saw motor 1.5 kW Machine weight approx. 0.5 t Space requirements approx. 1.6 x 1.4 x 1.3 m Mitre band saw - Semi-automatic - Double mitre - Material detection during lowering

Sąlyga: naujas, Manual metal bandsaw with high cutting precision. This machine enables 90° cuts as well as continuously adjustable mitre cuts — up to 45° to the left and up to 30° to the right. (Swivel range: 45° left, 60° right) Standard features: - Large, rotatable support table without wear! (The saw band cutting channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Height limitation of the saw frame via potentiometer on the control panel - Hydraulic cutting pressure regulation (solid material – pipe) - Saw arm lowering via hydraulic cylinder; infinitely adjustable - Raising of saw arm after cut is manual - Easy manual shifting of the clamping vice left/right - Electrical band tension monitoring with saw blade breakage control - Coolant pump with dual-feed to band guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical Data ● Cutting capacity: Hodpsd Dpz Aefx Ad Djpa round flat square 90° round 278 mm / flat 340 x 275 mm / square 275 mm 45° R round 260 mm / flat 320 x 255 mm / square 230 mm 30° R round 155 mm / flat 145 x 115 mm / square 115 mm 45° L round 205 mm / flat 275 x 180 mm / square 180 mm ● Drive power: 1.5kW // 400V // 50 Hz ● Band speed: 20-120 m/min, stepless ● Saw blade dimensions: 3125 x 27 x 0.9 mm ● Minimum remnant length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg Price on request

Sąlyga: naujas, Model designation Shark 281 CCS Hsdpfx Adogvkchs Depa

Sąlyga: naujas, Manual band saw / self-lowering with double-sided miter capability Cutting capacity: 90° round: 230 mm / flat: 275 x 230 mm / square: 230 mm 45° right round: 195 mm / flat: 190 x 190 mm / square: 190 mm 45° left round: 170 mm / flat: 185 x 150 mm / square: 150 mm 60° right round: 120 mm / flat: 120 x 85 mm / square: 85 mm Material support height: 760 mm Saw blade dimensions: 2720 x 27 x 0.9 mm Cutting speed: 40/80 m/min Drive power: 1.1/1.5 kW // 400V // 50 Hz Minimum diameter: 5 mm Dimensions (L x W x H): 1600 x 1150 x 1477 mm Weight: 370 kg - Option to add minimum quantity lubrication system at extra cost. - Suitable roller conveyor and material stops available. Hsdpfx Ajdx Nf Hsd Dopa

Sąlyga: naudotas, Gamybos metai: 2013, Cutting diameter: 250 mm Cutting range at 90 degrees (flat): 250 x 450 mm Cutting range at 45 degrees (round): 190 mm Cutting range at 45 degrees (square): 250 x 190 mm Table height: approx. 650 mm Saw blade length: 3300 mm Saw band dimensions: 3300 x 27 x 0.9 mm Cutting speed: 21 - 62 m/min Total power requirement: 1.5 kW Machine weight: approx. 320 kg Space requirement: approx. 1739 x 571 x 1130 mm Very rarely used (!!) Equipment: - Electro-hydraulic horizontal band saw Hedpfx Adoxab Efo Dspa - Precision saw blade guidance - Infinitely variable band speed adjustment - Infinitely variable saw bow feed adjustment - Heavy-duty cast construction - Manual quick clamping for material - Adjustable for mitre cuts - Spare saw blades - Coolant system * Machine link: ?machineno=1008-9173350

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotary table * for miter cuts from 45° right to 60° left - Automatic saw frame lowering Hpodpfx Adoxabpwj Dea * with steplessly adjustable feed * automatic cut-off at end of cut - Manual cutting mode selectable - 2x bandsaw blade speeds - Carbide blade guides - 1x saw blade - 1x angle stop - Swarf removal brush - Control panel – front right - Hydraulic tensioning system for saw blade * with analog pressure display (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED : - MEP LubeCut micro-dosing unit

Sąlyga: naujas, Cutting diameter: 220 mm Cutting range at 90°: square 210 x 210 mm Hsdpfjxabbgox Ad Dspa Cutting range at 90°: flat 230 x 185 mm Cutting range at 45°: round 150 mm Cutting range at 45°: square 150 x 150 mm Cutting range at 45°: flat 150 x 210 mm Cutting range at 60°: round 90.0 mm Cutting range at 60°: square 90 x 90 mm Cutting range at 60°: flat 90 x 100 mm Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting speed: 35 + 70 m/min Working height: approx. 900 mm Total power requirement: 1.2 kW Weight: 240 kg Dimensions (L x W x H): 870 x 1550 x 1740 mm Equipment: - Compact / robust manual bandsaw (HOBBY / INDUSTRIAL) * for cutting solid material and profiles - Mitre cuts possible to the left up to 60° - 2 selectable cutting speeds (37 + 74 m/min) - Infinitely adjustable saw bow feed - Automatic shutdown at end of cut - Manual quick-release vice, incl. quick-release lever - Machine base frame - Coolant system - Operating manual BERG SCHMID Auto-Cut System = 3-stage system 1. Automatic lowering & automatic sawing 2. Manual operation – lowering & sawing 3. Quick lowering of the saw frame – without sawing

Sąlyga: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Table height: 910 mm Cutting capacity at 90° flat: 245 x 150 mm Cutting capacity at 90° square: 200 x 200 mm Cutting capacity at 45° round: 160 mm Cutting capacity at 45° square: 160 x 160 mm Cutting capacity at 60° round: 100 mm Cutting capacity at 60° square: 100 x 100 mm Speed range: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight: approx. 200 kg Required space: approx. 1430 x 720 x 1700 mm Hpedpsxaa Tbefx Ad Doa Equipment: - For cutting profiles, pipes, and solid materials made of iron and non-ferrous metals - Saw bow can be swiveled up to 60° for mitre cuts - Infinitely adjustable lowering via hydraulic downfeed cylinder - Torsion-free, heavy-duty saw arm made of cast iron - 2 saw band speeds for optimal cutting results (400 V) - Robust construction ensures smooth and vibration-free operation - Automatic end stop after cutting through the material - Sturdy cast iron vice with quick-locking feature - Ball-bearing guided saw band with quick adjustment for adaptation to workpiece width, ensuring optimal results Scope of delivery: - Saw band - Workpiece stop - Base frame - Pressure gauge for band tension - Vice with quick-locking - Coolant system - Hydraulic downfeed cylinder - Motor protection switch - Automatic end stop

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vise width: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided miter cutting up to 60° - Automatic saw bow lowering * Steplessly adjustable feed rate * Automatic shut-off at end of cut - Manual cutting function selectable - 2 blade speeds - Carbide blade guides - 1 saw blade included Hpjdpfjxaa H Iox Ad Dja - 1 angle stop included - Integrated chip removal brush - Control panel at front right - Hydraulic tensioning device for saw blade * With analog pressure gauge (manometer) - Machine base/frame - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing device

Sąlyga: naujas, Cutting diameter: 225 mm Cutting range at 90°: flat 245 x 150 mm Cutting range at 90°: square 200 x 200 mm Cutting range at 45°: flat 160 x 140 mm Cutting range at 45°: round 160 mm Cutting range at 45°: square 140 x 140 mm Cutting range at 60°: flat 110 x 80 mm Cutting range at 60°: square 90 x 90 mm Cutting range at 60°: round 90 mm Hpedpfsxaa Dyex Ad Doa Vice width: 245 mm Blade speed range: 46/92 m/min Saw blade length: 2450 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 240 kg Space requirement: approx. 1,530 x 900 x 1,720 mm Equipment: - compact/robust manual bandsaw - with single-sided mitre device up to 60° to the left - hydraulic lowering of the saw bow * stepless feed adjustment * automatic cut-off at end of cut - two saw blade speeds - saw blade guide with carbide plates - manual vice with quick release - machine base - coolant system - manual saw blade tensioning (star handle in front) - 1x angle stop - 1x metal saw blade - operating manual

Sąlyga: naujas, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Cutting range at 45°: round 230 mm Cutting range at 45°: flat 220 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: flat 140 x 100 mm Cutting range at 60°: square 100 x 100 mm Cutting range at 60°: round 110 mm Hodpfsxaarkex Ad Dopa Vice: 285 mm Speed range: 36/72 m/min Saw band length: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 440 kg Required space approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Large mounted rotary table * for mitre cuts from 45° right to 60° left - Automatic saw bow lowering * with steplessly adjustable feed * End stop at end of cut - Manual cutting function selectable - 2x saw band speeds - Saw band guides made from carbide plates - 1x saw band - 1x angle stop - Rotating chip removal brush - Control panel – front right - Hydraulic pressure cell for saw band tension * with analog pressure indicator (manometer) - Machine base with forklift pockets - Coolant unit - Operating manual in German

Sąlyga: naujas, Cutting diameter: 225 mm Cutting capacity at 90° (flat): 245 x 150 mm Cutting capacity at 90° (square): 200 x 200 mm Cutting capacity at 45° (flat): 160 x 140 mm Cutting capacity at 45° (round): 160 mm Cutting capacity at 45° (square): 140 x 140 mm Cutting capacity at 60° (flat): 110 x 80 mm Cutting capacity at 60° (square): 90 x 90 mm Cutting capacity at 60° (round): 90 mm Vice width: 245 mm Blade speed range: 46 / 92 m/min Saw blade dimensions: 2450 x 27 x 0.9 mm Total power requirement: 0.7 / 0.81 kW Machine weight approx. 265 kg Equipment/features: - Compact, robust manual bandsaw - Large, bearing-mounted rotary table * Suitable for mitre cuts from 45° right to 60° left - Hydraulic lowering of the saw bow * Infinitely variable feed adjustment * Automatic cut-off at end of cut - Two blade speeds - Carbide blade guides - Manual vice with quick-release - Machine base - Coolant device - Manual blade tensioning (front star handle) Hedpjxaaciefx Ad Djpa - 1x angle stop - 1x metal saw blade - Operating manual