Juostiniai pjūklai - horizontali

ZIMMER Z 252 / DGH

Būklė: naujas, Cutting capacity at 90°: round 240 mm Cutting capacity at 90°: square 240 x 240 mm Cutting capacity at 90°: flat 165 x 210 mm Cutting capacity at 45° right: round 195 mm Cutting capacity at 45° right: square 185 x 185 mm Cutting capacity at 45° right: flat 130 x 190 mm Cutting capacity at 60°: round 120 mm Cutting capacity at 60°: square 85 x 85 mm Cutting capacity at 60°: flat 85 x 120 mm Cutting capacity at 45° left: round 170 mm Cutting capacity at 45° left: square 145 x 145 mm Cutting capacity at 45° left: flat 60 x 195 mm Cutting speed: 36 + 72 m/min Saw blade dimensions: 2725 x 27 x 0.9 mm Vice opening: 315 mm Working height: 900 mm Motor power: 1.2 kW Weight: 330 kg The ZIMMER Z252/DGH is a hydraulic semi-automatic band saw designed for metal fabrication. This double mitre saw can swivel up to 60° to the left and 45° to the right. The machine features a rapid-approach button (for fast-feed positioning to the material). Csdpfxoy H N Nne Ah Hjrd Equipment: - Infinitely adjustable feed via a hydraulic throttle valve - Tool-free saw blade change with quick-release fasteners - Hydraulic unit, coolant pump, control panel, base frame, saw blade, and 400 V / 16 A plug included.

Būklė: naujas, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90°: rectangular 150 x 190 mm Cutting area at 45°: rectangular 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal band saw is supplied with a fully enclosed worm gear drive. It is also equipped with a hydraulic pressure control and a base frame that can be swivelled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the original factory base, automatic shut-off, and a quick-release clamping device. Codpfxeg Trvrs Ah Herd

Būklė: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 45°: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45°: round 150 mm Cutting capacity at 45°: square 145 mm Cutting capacity at 60°: flat 63 x 107 - 69 x 90 mm Codpfxslb I Das Ah Hord Cutting capacity at 60°: round 70 mm Cutting capacity at 60°: square 70 mm Cutting capacity at 90°: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90°: round 225 mm Cutting capacity at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight approx. 200 kg Space requirement approx. 1385 x 580 x 890 mm Technical Features: - Hydraulic system for controlled downfeed of the saw head - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox - Saw bow, vise, and swivel components made of cast steel - Steel band guides with ball bearings - Quick-release vise - Front lever for locking the mitre adjustment - Coolant pump with aluminium housing - Large handwheel for easy blade tensioning - Pressure gauge to display band tension (600–1000 kg/cm³) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed control

Būklė: dilaminuotas dirbtuvėje (naudotas), Roboterschweißanlage mit 2 m Zweistationen-Wender Zum Verkauf steht eine Roboterschweißanlage der Marke Yaskawa Motoman inkl. RM2-250 Wender Sicherheitstechnik Roboter UP20 XRC Düsenreiniger usw. Cedpfed Tfb Njx Ah Hord Die Anlage kann durch uns montiert und in Betrieb genommen werden. Eine Einweisung bzw. Schulung ist ebenfalls möglich. Die Anlage wird je nach Kundenwunsch überholt und aufbereitet. Wir sind zertifizierter YASKAWA Systempartner und bieten Ihnen umfassenden Service für Ihren Motoman-Roboter und Ihre Anlagen.

Būklė: beveik kaip naujas (naudotas), Profile grinding machine Utma model P20 Crsdpfx Aheff H E Rs Hsd

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed are essential. The model is equipped with a swivel arm ranging from 0-60°, and the saw guides are based on carbide inserts. The frame construction ensures precise and quiet operation. Machine Features This horizontal metal band saw with a swiveling arm enables cutting on a plane perpendicular to the axis of the material as well as at any angle from 0 to 60°. The workpiece can be manually fed or handled by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide pads and bearings, significantly improving blade guidance, service life, straightness, accuracy, and cut quality. Carbide guidance greatly reduces wear on both the machine and the saw blade. The machine features an efficient coolant pump with a closed-circuit coolant system. The arm of the saw is made from a single cast iron piece, and together with the 27 mm-wide cutting blade, allows for full serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and is fitted with a quick-release clamp. The blade guides are outfitted with hard metal — carbide inserts — and a rolling bearing system. These CARBIDE INSERT GUIDES are responsible for the precision and straightness of the cut. The cast iron work table, fixed to the base, comes with a swivel arm and a separate control panel. During the cutting process, the primary cutting movement is the movement of the cutting blade, while the arm descends as the feed stroke. The descending speed of the arm (cutting speed) is regulated using a hydraulic cylinder. Feed speed is adjusted on the saw’s control panel. You can select between two blade speeds: 37.5 or 75 m/min. Once the arm reaches its lowest position (after cutting the workpiece), the saw blade drive switches off automatically. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened. Additional protection includes automatic shut-off of the saw if the blade breaks. The machine is powered by a worm gear motor. The motor with a thermal fuse protects against overheating during operation. Technical Data: TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm Csdpsudi Unjfx Ah Hsrd BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter / Dimensions in mm): ANGLE ROUND RECTANGLE SQUARE 0° ø220 260 x 140 200 x 200 45° R ø160 160 x 140 160 x 160 60° R ø100 120 x 100 100 x 100 Price does not apply to machines purchased in Poland.

Būklė: geras (naudotas), Gamybos metai: 2003, keliamoji galia: 150 kg, rankos pasiekiamumas: 2 700 mm, Modelis: KR150 Būklė: Naudotas Crjdohakfajpfx Ah Hed Metai: 2003 Valdymo spinta: KRC2 Komplekte: Manipuliatorius + KRC2 valdymo spinta + visi laidų komplektai Prašome susisiekti dėl kainos pasiūlymo ir atnaujinimo galimybių. PLC Merkezi EOOD sandėlyje turime daugiau nei 300 robotų ir prekiaujame KUKA, ABB, FANUC ir Motoman prekių ženklais.

Būklė: naujas, Saw blade diameter 300 mm Cutting capacity at 90°: round 102 mm Cutting capacity at 90°: square 90 mm Cutting capacity at 90°: flat 120 x 80 mm Cutting capacity at 45°: round 90/80 mm Cutting capacity at 45°: square 80/70 mm Cutting capacity at 60°: flat 90 x 70 / 85 x 70 mm Total power requirement 1.5/2.0 kW Machine weight approx. 0.135 t Space requirement approx. 0.5 x 1.05 x 1.0 m The versatile professional metal circular saw. Impressive in both performance and price. · For mitre cuts to the left up to 45° · Suitable for cutting steel, stainless steel, and, to a limited extent, aluminium profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades · 2 cutting speeds: 33 + 66 rpm · Automatic cooling directly on the saw blade · Saw head with double bearing · 24 V safety switch integrated in the handle with restart protection Csdpfx Aofg Rlash Hord · Length stop, assembly tool included · Enclosed cast iron body, solid cast construction · Mitre adjustment on operator side · Machine base (optional) NOTE: The price is without the saw blade!!! (Saw blade price 93,- EUR / 123,- EUR)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. Electrical and electronic systems are excluded from the warranty, as they have only been function-tested. For machines located outside our North Bavarian sales region, travel costs are to be borne by the customer. Geometric inspection with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new Crsdpfomhfrrex Ah Hod - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, as inspected Technically, the machine corresponds to the state of the art at the time of manufacture.

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), SMS MEER CNC-Doppelseitige Anfasmaschine Hersteller: SMS MEER Crodpfx Asghrguoh Hsd Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohrdurchmesser Ø 21,3 – 114,3 mm Wandstärke: 2,3 – 11 mm Länge: 6–12 m Die Anlage besteht aus zwei RFA14-Anfasmaschinen mit Transportvorrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Innen- und Außen-Anfasen beider Rohrenden. Das Rohrbearbeitungsspektrum umfasst einen Durchmesserbereich von 21,3 bis 114,3 mm und eine Wandstärke von 2,3 bis 11 mm bei einer Rohrlänge von 6 bis 12 m. Die Fördertechnik im Bereich der Anfasmaschinen dient dazu, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu transportieren.