Horizontalios juostinės pjūklai – pusiau automatiniai – apvali pjovimo sritis 0–300 mm pirkti naudotą (114)

Sąlyga: naujas, Saw blade --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Hpedpfjga Tzusx Ad Doa Cutting capacity 90° --- 270 mm / 260 x 320 mm Cutting capacity 60° --- 140 mm / 140 x 140 mm Cutting capacity 45° --- 230 mm / 220 x 220 mm Cutting capacity -45° --- 200 mm / 220 x 150 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guide with carbide inserts Quick-release vice Coolant pump Hydraulic cylinder Motor protection switch Automatic cut-off

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0306283/0, - Labai gera metalinė juostinė pjovimo staklės. Didelis pjovimo našumas. - 5 nauji pjovimo juostų Hpjdpfxsxnartj Ad Dea - Volelinis konvejeris apie 5 m (taip pat visiškai veikiantis)

Sąlyga: naujas, Gamybos metai: 2025, Compact, fully automatic band saw (also mitre cuts up to 45°) Torsion-resistant, robust cast saw frame Powered chip removal brush Hjdpfxetpg Sae Ad Djpa High-performance industrial worm gear motor Automatic shut-off after cutting cycle is complete with subsequent raising of the saw frame to the stepless, preset frame home position Mechanical saw blade tensioning with electric blade breakage monitoring Minimum cut-off length 180 mm, smallest possible diameter 5 mm Feeding accuracy of 0.2 mm Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Easily removable chip collection tray Includes combi-tooth saw blade 4/6 Machine colour: - Saw frame RAL 7035 - Machine body RAL 7005 12 months warranty for single-shift operation Motor: Three-phase, 400 V, pole-switchable (kW) 1.1/1.5 Saw blade dimensions (mm): 2720 x 27 x 0.9 Flywheels Ø (mm): 300 Cutting speed (m/min): 40 – 80 Clamping width (mm): 275 Working height (mm): 768 Dimensions: 2,220 x 1,650 x 1,730 mm Weight (kg): 495 DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORISED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! REQUEST A QUOTE!

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), Very robust and easy-to-operate semi-automatic hydraulic double mitre band saw. Hydraulic saw feed and saw pressure adjustable separately, Vice can be operated hydraulically and manually, Standard with 2 saw band speeds, Swing-away material stop, Coolant system and chip tray. Main technical data: Hodpfxegk A Rwj Ad Dspa Cutting length up to 260 mm Cutting height up to 220 mm Cutting diameter up to 220 mm Power 1.4 kW Dimensions (LxWxH): 1250 x 640 x 1300 mm Also available in other sizes (320 and 450 mm) Request a non-binding quotation. We offer delivery, service, spare parts, and saw bands from a single source. Our ZIP code areas in Germany are 17, 18, 19, 23.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Dimensions L-W-H 400x300x200 mm Saw blade diameter 420 mm Hodpfxsvf N Suo Ad Depa Machine weight approx. 3500 kg Manufacturer: KASTO Model: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm Fully automatic NC horizontal band saw 1 chip conveyor, 1 external chip conveyor, 1 powered roller conveyor approx. 450 cm.

Sąlyga: naujas, Cutting diameter: 220 mm Saw blade length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx.: 0.24 t Space requirements approx.: 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left Hpjdpod Iip Tofx Ad Dja -Cutting speed 25 - 80 m/min -Vice with quick-action clamping device -Carbide saw blade guides -Blade tension control -Electric coolant system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Stepless feed adjustment -With limit switch -High-speed frame lowering from rest position to workpiece, then switch to normal feed rate -Manual operation

Gamybos metai: 1992, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 29-0288, Offer 04612 Technical Data: - Cutting capacity at 90° round: 260 mm Hpsdogin Ndepfx Ad Dja - Cutting capacity at 90° flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - Cutting capacity at 45° flat: 240 x 200 mm - Machine mounted on original turntable - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Sąlyga: naujas, Semi-automatic metal band saw with high cutting precision. This machine enables 90° cuts as well as continuously adjustable mitre cuts, from left up to 45° and right up to 30°. (Swivel range: left 45°, right 60°) Standard equipment: - Large rotatable support table, wear-free! (The saw band channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Lowering of the saw arm by hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual lateral adjustment of the vice (L/R) - Electric blade tension monitoring with saw blade breakage detection - Coolant pump with dual supply to the saw band guides - Carbide saw band guides and guide rollers Hpsdpfx Aded Dpz Ss Doa - Bi-metal saw blade M 42 - Chip brush Technical data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Minimum residual piece length: 20 mm ● Smallest ø: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Sąlyga: naujas, Gamybos metai: 2025, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial worm gear motor - Automatic shut-off after cutting completion - Mechanical saw blade tensioning with electric blade breakage monitoring - Quick-release vice, adjustable - Hydraulic saw frame descent with rapid feed function (infinitely adjustable) - Electric coolant pump - Precision-ground carbide saw blade guides (adjustable) Hjdpfx Aofg Eq Rod Djpa - Large-diameter round support table, rotates for mitre cuts, mitre angle display (scale) on operator side - Direct switching from manual to descent mode - Easily removable chip collection tray - Material stop 500 mm with scale - Incl. combination-tooth saw blade 4/6. Technical Data - Motor: Three-phase current 400 V, pole-changeable, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheel diameter: 300 mm - Cutting speed: 40/80 m/min - Vice clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Further accessories available on request. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT RANGE! REQUEST A QUOTE!

Sąlyga: naujas, 1 brand new semi-automatic horizontal band saw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm Hsdpfx Aovyidmjd Dopa -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Equipment / Special Features: • Semi-automatic operation • Hydraulic vice, actuated via foot pedal • Double mitre cuts via pivoting saw frame o The workpiece remains stationary! o No need to turn the material for mitre cuts! o High efficiency and significant time savings! • Fixed precision stops at 0°, 45°, and 60° to the left, and 45° to the right • Replaceable work table • Hydraulic vice, laterally adjustable to the left and right • Adjustable length stop (500 mm) for repeat cuts of identical length • The lowering of the saw arm is continuously variable by hydraulic system; after cutting, the arm raises automatically and the vice opens • Coolant system • Swarf brush • Swiveling control panel • Electrical safety switch for blade tension and blade guard • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Sąlyga: geras (naudotas), Gamybos metai: 1995, Matmenys I-P-A: 3,50/2,40/2,20 mm Mašinos svoris apie 3 500 kg Gamintojas: KASTO, Hpedpfow N S Ecox Ad Doa Tipas: HBA 420 AU, Gamybos metai: 1995 Pilnai automatinė NC horizontalioji juostinė pjovimo staklės su hidrauliniu spaustuvu iki 400 mm, 1 drožlių transporteriu, 1 išoriniu drožlių transporteriu, 1 ritininė linija, 1 ritininė linija, hidraulinė pavara, variklis išjungtas, Išmatavimai (plotis x aukštis x gylis): apie 400x200x350 cm

Sąlyga: naujas, Cutting diameter: 240 mm Saw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Hsdod Iip Sepfx Ad Dopa Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with quick-clamping device • Quick-release lever for easy operation • Frame and gearbox cast in one piece, very quiet cut and low vibration • Electronic monitoring of blade tension and blade breakage, saw blade cover • Carbide saw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic saw frame lowering via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut. Rapid traverse lowering of the saw frame from rest position to the workpiece, then switching to normal sawing feed (e.g. for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g. for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Sąlyga: naujas, Bandsaw machine Brand: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting capacity (round): 300 mm Blade speed: 20-100 m/min, infinitely variable Standard features: - Fully hydraulic, semi-automatic design After starting, the machine automatically clamps, returns to the starting position after the cut, stops the saw blade, and opens the vice. - Cut sensor for automatic detection of material height Hodpsilg Hdofx Ad Dopa - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Sąlyga: naujas, Gamybos metai: 2022, SPECIAL PRICE, stock machine year of manufacture 2022, condition: new List price: €14,110 STOCK MACHINE – Semi-automatic metal band saw with high cutting precision! This machine enables stepless miter cuts to the left up to 45° and to the right up to 30° (swivel range left 45°, right 60°). Technical data ● Cutting capacity - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right, round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right, round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left, round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0.9-1.5 kW / 400 V / 50 Hz Hpodpfemf T Hpox Ad Doa ● Blade speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0.9 mm Standard equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensor ● Easy and convenient material clamping with hydraulic short-stroke cylinder ● Hydraulic cutting pressure adjustment ● Simple, stepless adjustment of the saw for miter cuts ● Electric blade tension monitoring with saw blade breakage control

Sąlyga: naujas, Gamybos metai: 2025, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after cutting completion, saw arm returns to start position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precision-ground, carbide-tipped, adjustable saw band guides Electric coolant pump Manual blade tensioning with indicator, including electronic blade and cutting pressure monitoring Hydraulic vise (opening and closing) Swarf removal brush, driven Large, solid, round worktable, rotates for mitre cutting with integrated cutting channel; mitre angle adjustment manual, with scale readout Material stop 500 mm with scale Including saw band with combination toothing 4/6 Machine colour: - Saw frame RAL 7035 - Machine body RAL 7005 Main motor, 3-phase 400 V, frequency controlled 1.5 kW Saw band dimensions 2910 x 27 x 0.9 mm Flywheel diameter Ø 325 mm Cutting speed 20–120 m/min Vise opening width 320 mm Working height 760 mm Hsdscl Tc Aepfx Ad Depa Cutting range: At 0° = Round Ø 250 mm, Square 240 x 240 mm, Rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight 420 kg Additional accessories available on request. DELIVERY: FREE OF CHARGE (within Germany) CANNOT FIND THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! CONTACT US FOR AN OFFER!

Sąlyga: naujas, Gamybos metai: 2023, Apvalaus plieno pjovimo diapazonas ties 45°: 108 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 108 mm, pjovimo aukštis (maks.): 150 mm, BERG+SCHMID Double Mitre Band Saw GBS 250 Super AutoCut Speed: 18-110 rpm • Mitre cuts: left 60° / right 45° • Quick-release movable vice • Heavy-duty vice and cast iron machine base • Ball bearing rotary table • Hydraulic brake cylinder • Large, robust material support • Automatic coolant system • Worm gear running in oil bath • Enclosed saw frame • Adjustable ball bearing guides • Tool compartment – base door • Cutting monitoring via ammeter • Adjustable feed pressure control • Infeed side support roller • Machine stand (supplied disassembled) GBS 250 Super AutoCut 3-Step System: I. Automatic saw frame lowering via hydraulic cylinder, stepless adjustable feed rate, with limit switch at end of cut II. Rapid down-feed of the saw frame to the workpiece, then switch to normal cutting feed (e.g. for marking) Hpjdpfx Aor Ik Sqsd Dsa III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) lowering in idle position Saw band dimensions: 2765x27x0.9mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Sąlyga: beveik kaip naujas (naudotas), Capacity at 90°: 260° Cutting capacity flat at 90°: 300 x 200 mm Capacity left 45°: 175° Capacity right 45°: 200° Max. saw speed: 35 + 70 Saw blade dimensions: 2880 x 27 x 0.9 mm Power: 1.4 kW Length: 1900 mm Width: 1800 mm Height: 2000 mm Hpedpfx Aswvkatjd Dja

Sąlyga: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic manual function. Equipped with MEP-28 control for mitre cuts from 45° right up to 60° left. Key features: - New centralized control console mounted on an articulated arm. - Low-voltage control panel with polyester membrane keyboard featuring thermoformed raised pushbuttons and operator control signal. - Display for showing: * Diagnostics (user-language messages) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time taken for each cut * Saw blade motor current draw * Saw blade tension * Saw blade speed * Numerical display of head position - IP55 manual cycle selector handle (24 V) - Complete program for all special cutting cycles - Identification of other special cutting cycles for specific applications Hpodpfx Adefg E H Uj Dea - New generation high-performance hydraulic control unit with low energy consumption - Rotating table (mounted on 420 mm roller bearings and pre-loaded thrust bearing) - Dual blade speed (40/80 m/min) with control - Prepared for fitting an electronic inverter for stepless blade speed adjustment from 20 to 90 m/min - Programmable saw head stroke directly from the control panel to suit material being cut - Sideways movable clamping device left and right, with quick-release vise - Hand-operated blade tension control with on-screen display via electronic converter - Base designed to collect all coolant, even during maximum angle cuts - Integrated coolant tray (fitted with electric pump for saw blade lubrication and cooling) and chip drawer (which can be replaced with a chip conveyor—see special accessories) in the machine base - Provision for fitting a minimal lubrication system for the saw blade (optional, in addition to the standard emulsion oil lubrication) - Chip removal brush - The machine is suitable for pallet truck transport - Adjustable length stop for identical-length cuts - Material support arm with roller for securing the loading table - Bimetal saw blade for solid and profile material - Tools and operating manual in the relevant user language.

Sąlyga: naujas, Optimum OPTIsaw SD 351 AV Semi-Automatic Double Miter Metal Bandsaw Equipped with Siemens inverter drive. Professional and robust saw with a cutting capacity of up to 350 mm. Description: - Heavy-duty industrial construction - Low-noise operation - Manual or semi-automatic operation - Continuously variable saw band speed from 0–80 m/min - High cutting accuracy thanks to vibration-free operation - Miter adjustment up to 60° by swiveling the entire saw bow - Supplied as standard with premium bi-metal saw band - Precision-adjustable end stops for accurate angles - Chip brush - Microswitch for automatic cut-off - Adjustable roller support for long and heavy workpieces - Coolant pump - Ball-bearing supported saw band guide with carbide inserts for optimum cutting results - Easy adjustment of the lowering speed via feed control valve on the control panel - Large-dimension, hydraulic quick-release vice, self-closing, movable for large cross-sections - Fully equipped machine; user can begin productive work immediately after commissioning - EMC class C2 - 2-channel safety circuit with rapid stop in emergency - Siemens Sinamics G110M inverter Semi-automatic operation process: - Closing of the vice and activation of the drive motor - Lowering of the saw frame for cutting - Motor stop and return of the saw frame to starting position Hpjdpfxsdc H Uks Ad Doa Technical Data: Dimensions and weights: - Length (product) approx.: 1935 mm - Width/Depth (product) approx.: 1425 mm - Height (product) approx.: 1626 mm - Weight (net) approx.: 600 kg Electrical data: - Drive motor power: 2.2 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - Hydraulic pump motor power: 1.4 kW - Coolant pump motor power: 50 W - Total connected load: 3.8 kW Machine data: - Saw band speed(s): 15–100 m/min, infinitely variable - Saw band length: 2925 mm - Saw band width: 27 mm - Saw band thickness: 0.9 mm - Cutting angle: -45 – +60° - Manual operation: hydraulic via push-button - Semi-automatic operation: automatic Cutting ranges: - Cutting range 0° round (solid): 270 mm - Cutting range 0° square (solid): 230 mm - Cutting range 0° rectangle vertical (solid): 230 x 350 mm - Cutting range -45° round (solid): 230 mm - Cutting range -45° square (solid): 170 mm - Cutting range -45° rectangle vertical (solid): 140 x 200 mm - Cutting range +45° round (solid): 230 mm - Cutting range +45° square (solid): 200 mm - Cutting range +45° rectangle vertical (solid): 210 x 220 mm - Cutting range +60° round (solid): 140 mm - Cutting range +60° square (solid): 140 mm - Cutting range +60° rectangle vertical (solid): 140 x 220 mm

Sąlyga: naujas, Gamybos metai: 2024, Apvalaus plieno pjovimo diapazonas ties 45°: 108 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 108 mm, pjovimo aukštis (maks.): 150 mm, BERG+SCHMID Double Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25-80 m/min • Mitre angle left: 60° • For cutting steel, stainless steel, and aluminium profiles • Quick-release vice with fast clamping device • Integrated blade tension control • Carbide blade guides • Electric coolant system • Machine base supplied disassembled Hsdpjt I R Edsfx Ad Dopa The AutoCut system consists of: • Hydraulic cylinder, feed control, spring assembly, limit switch, and enables three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at end of cut 2. Rapid lowering of the saw frame from rest position to the workpiece, then switching to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc., available on request! Delivery time: from stock Waiblingen Beinstein

Sąlyga: naujas, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 220 mm Cutting range at 90 degrees: square 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950x27x0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO Equipped with semi-automatic dynamic and manual functions, features the MEP-28 control system for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head raises - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and start of the cycle via hand button). Main features: - New, centralized control console mounted on an articulated arm, enabling operation from any working position. - Low voltage control panel: Hedpfjfg E H Ssx Ad Djpa - Polyester membrane keypad with thermoformed, raised keys and control signal display. - Display for: * Diagnostics (messages in user’s language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time taken for each cut * Saw band motor power consumption * Saw band tension * Saw band speed * Numeric display of head position. - IP55 manual 24 V cycle switch handle. - Complete program of all special cutting cycles. - Programming possible for additional special cutting cycles for specific applications. - Newest-generation hydraulic unit, highly efficient with low energy consumption. - Large work surface with turntable on roller bearings, 265 mm with preloaded thrust bearing, mounted. - Dual band speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw arc stroke programmable directly from the control panel, for adaptation to the workpiece material. - Clamping device can be shifted laterally left and right, with quick-release vice. - Manual band tension control via display, using electronic converter. - Machine base with extendable coolant tray. - Electric coolant pump for the cooling and lubrication of the saw band. - Prepared for installation of the minimum quantity lubrication kit for the saw band (optional), in addition to standard coolant system with emulsion oil. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repetitive cutting to same length. - Material support arm with roller, for fixing loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the corresponding user language.

Sąlyga: naujas, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5 / 1.8 kW Jaw opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36 / 72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description The SHARK 282 SXI EVO is an electro-hydraulic, semi-automatic bandsaw with both semi-automatic dynamic and manual modes, equipped with MEP-28 control for mitre cuts from 45° right to 60° left. Hsdpfx Adjcgbq Io Depa Semi-automatic function: At the start of the cycle: - The vice closes and the motor starts – Saw head descends for cutting – Motor switches off – Saw head returns – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button). Key features: • New centralized control console on a pivoting arm, allowing operator access from any working position • Low-voltage control panel: – Polyester membrane keypad with thermoformed raised buttons and actuation control signal – Display shows: * Diagnostics (messages in user’s language) * Alarms (causes description) * Status of inputs and outputs * Cut counter * Time used for each cut * Saw blade motor current draw * Saw blade tension * Saw blade speed * Numeric display of saw head position – Manual 24V operation switch, IP55-rated • Complete program for all special cutting cycles • Identification of additional special cutting cycles for unique applications • New generation hydraulic control system: powerful and energy-efficient • Large working surface with turntable on roller bearings, 265 mm diameter with preloaded thrust bearings • Dual blade speeds (36/72 m/min) with control • Prepared for optional electronic inverter for stepless blade speed regulation from 20 to 90 m/min • Saw bow stroke programmable directly from the control panel, allowing adaptation to the workpiece height • Movable clamping device to the left and right, with quick-release vice • Manual blade tensioning control with electronic readout on display • Base frame with pull-out coolant tray • Electric coolant pump for blade cooling and lubrication • Prepared for installation of minimum quantity lubrication system for the saw blade (optional), as well as standard emulsion oil lubricating system • Chip removal brush • Designed for forklift transport • Length stop for repeat cuts • Material support arm with roller for mounting a loading table • Bi-metal saw blade for solid and profile materials • Tool kit and operating instructions in the user’s language For further technical data, please refer to the attached PDF document.

Sąlyga: naudotas, Gamybos metai: 2005, Pjovimo skersmuo 230 mm Pjovimo juostos ilgis 2770 mm Stalo aukštis 940 mm Hodpfx Adow Tdyas Depa Pjovimo sritis ties 90 laipsnių: apvalus 230 mm Pjovimo sritis ties 90 laipsnių: plokščias 280 x 150 mm Pjovimo sritis ties 90 laipsnių: kvadratas 230 x 230 mm Pjovimo sritis ties 45 laipsnių: apvalus dešinė 180 mm Pjovimo sritis ties 45 laipsnių: apvalus kairė 200 mm Pjovimo sritis ties 45 laipsnių: kvadratas dešinė 155 x 155 mm Pjovimo sritis ties 45 laipsnių: plokščias dešinė 180 x 90 mm Pjovimo sritis ties 45 laipsnių: kvadratas kairė 180 x 180 mm Pjovimo sritis ties 45 laipsnių: plokščias kairė 200 x 100 mm Pjovimo sritis ties 60 laipsnių: apvalus 135 mm Pjovimo sritis ties 60 laipsnių: kvadratas 95 x 95 mm Pjovimo sritis ties 60 laipsnių: plokščias 130 x 90 mm Spaustuvas: 280 mm Pjovimo greitis 40 / 80 m/min Bendras energijos poreikis 1,5 / 1,8 kW Staklių svoris apie 0,4 t Užimamas plotas apie 0,9 x 1,3 x 1,8 m Pusiau automatinė kampinė juostinė pjovimo staklė - Dvigubas kampinis pjovimas - Mikro purškimo sistema

Sąlyga: naujas, METALLKRAFT BMBS 300x320 HA-DG Semi-Automatic Pivoting Frame Metal Band Saw Image shows optional equipment Semi-automatic pivoting frame metal band saw for miter cuts from +60° to -45° with frequency inverter control For cutting hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals, and plastics Saw functions are hydraulically controlled Saw blade drive via low-maintenance, oil-lubricated worm gear Equipped with a robust three-phase motor with overload protection Rotary table with bearings After the cut cycle is started, the hydraulic vice clamps automatically – after completion, it returns to the starting position (HA-DG) Saw arm inclined by 25°, extending blade life Pivoting saw arm from +60° to -45° With chip removal brush for optimal cleaning and maintenance of saw blade With frequency inverter: enables stepless adjustment of blade speed from 20 – 100 m/min BRP – Saw blade monitoring Hydraulic vice with manual quick-release for lateral adjustment Limit switches control the upper and lower positions of the saw arm No need to set the upper end position Cut detection function with integrated button Carbide blade guides Swiveling control panel Scope of delivery: Saw blade Operating tools 1-meter length stop Coolant pump Technical Data: Length (product): approx. 2050mm Width/Depth (product): approx. 1170mm Height (product): approx. 2040mm Weight (net): approx. 650kg Drive motor power: 2.4kW Connection voltage: 400V Mains frequency: 50Hz Blade speed: 20–100 m/min (stepless) Blade length: 3660mm Blade width: 27mm Blade thickness: 0.9mm Cutting capacity 0° round (tube): 300mm Cutting capacity 0° round (solid): 300mm Cutting capacity 0° rectangular horizontal (hollow profile): 320 x 290mm Cutting capacity 0° bundle (tube): 320 x 160mm Cutting capacity -45° round (tube): 300mm Cutting capacity -45° round (solid): 300mm Cutting capacity -45° rectangular horizontal (hollow profile): 300 x 280mm Cutting capacity -60° round (tube): 200mm Cutting capacity -60° round (solid): 200mm Cutting capacity -60° rectangular horizontal (hollow profile): 190 x 200mm Hjdpfofdgi Hox Ad Dopa Cutting capacity +45° round (tube): 270mm Cutting capacity +45° round (solid): 270mm Cutting capacity +45° rectangular horizontal (hollow profile): 270 x 200mm Table height material feed: 800mm

Sąlyga: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Table height: mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Operation in CCS version: After the material has been advanced and the vices have been closed, the cutting process is started. The lowering is performed by the saw’s own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch with provision for padlock, switch or speed changer, emergency stop, thermal-magnetic protection, 24V low-voltage system). Electronic band tension converter with display screen. Manual vice with quick-release locking. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubricating the saw band. Hpedpsfg E H Tofx Ad Dea Chip removal brush. Adjustable precision stops for performing cuts of identical length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating manual.