Juostinis pjūklas

MEP SHARK 282 SXI EVO Metallbandsäge

MEP SHARK 282 SXI evo [Semi-Automatic]

All MEP models available on request!

Motor power: 1.5 / 1.8 kW
Jaw opening: 285 mm
Blade dimensions: 2950x27x0.9 mm
Iedpfx Acscgbq Ijujbc
Weight: 485 kg
Blade speed: 36 / 72 m/min
Cutting capacity at 0°: 250 / 220x220 / 280x220 mm
Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm
Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm
Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm
Cutting capacity at 60° left:

Description

The SHARK 282 SXI EVO is an electro-hydraulic, semi-automatic bandsaw with both semi-automatic dynamic and manual modes, equipped with MEP-28 control for mitre cuts from 45° right to 60° left.

Semi-automatic function:
At the start of the cycle: - The vice closes and the motor starts – Saw head descends for cutting – Motor switches off – Saw head returns – Vice opens.

Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button).

Key features:
• New centralized control console on a pivoting arm, allowing operator access from any working position
• Low-voltage control panel:
– Polyester membrane keypad with thermoformed raised buttons and actuation control signal
– Display shows:
* Diagnostics (messages in user’s language)
* Alarms (causes description)
* Status of inputs and outputs
* Cut counter
* Time used for each cut
* Saw blade motor current draw
* Saw blade tension
* Saw blade speed
* Numeric display of saw head position
– Manual 24V operation switch, IP55-rated
• Complete program for all special cutting cycles
• Identification of additional special cutting cycles for unique applications
• New generation hydraulic control system: powerful and energy-efficient
• Large working surface with turntable on roller bearings, 265 mm diameter with preloaded thrust bearings
• Dual blade speeds (36/72 m/min) with control
• Prepared for optional electronic inverter for stepless blade speed regulation from 20 to 90 m/min
• Saw bow stroke programmable directly from the control panel, allowing adaptation to the workpiece height
• Movable clamping device to the left and right, with quick-release vice
• Manual blade tensioning control with electronic readout on display
• Base frame with pull-out coolant tray
• Electric coolant pump for blade cooling and lubrication
• Prepared for installation of minimum quantity lubrication system for the saw blade (optional), as well as standard emulsion oil lubricating system
• Chip removal brush
• Designed for forklift transport
• Length stop for repeat cuts
• Material support arm with roller for mounting a loading table
• Bi-metal saw blade for solid and profile materials
• Tool kit and operating instructions in the user’s language

For further technical data, please refer to the attached PDF document.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.