Didelės spartos radialinės gręžimo staklės pirkti naudotą (65)

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 000 mm, padavimo eiga Y ašimi: 1 050 mm, padavimo ilgis Z ašis: 200 mm, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool holder: SK 40 Table dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance - spindle lower edge min. (mm): 140 Distance - table upper edge max. (mm): 740 Drilling radius min (mm): 540 Drilling radius max (mm): 1590 U-axis travel (mm): 2600 Y-axis travel (mm): 1050 Quill stroke (Z-axis) (mm): 200 Column stroke (W-axis) (mm): 400 Machining Performance Drilling capacity in solid material: St 60 (mm): 40 GG 22 (mm): 50 Tapping: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled (kW): 5.5 at 100% duty cycle Speed range (rpm): 15 - 2800 Torque (Nm): max. 250 Constant torque range (rpm): 15 – 200 Feed Drives Pgjdpfx Ajy Ttrtogmer X-axis – AC servo motor (kW): 0.25 Y-axis – AC servo motor (kW): 0.25 Z-axis – AC servo motor (kW): 4.50 W-axis – AC servo motor (kW): 2.50 U-axis – AC servo motor (kW): 2.50 Rapid traverse speeds (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid traverse speeds (U/W) (m/min): 7.5 / 3 Feed rates, stepless (mm/min): 5 - 2000 Feed force (N): 12000 Accuracy Positioning accuracy X, Y-axis (over 1200 mm) (mm): ±0.075 Repeatability X, Y-axis (mm): ±0.03 Positioning accuracy Z-axis (mm): ±0.05 Repeatability Z-axis (mm): ±0.03 Positioning accuracy W-axis (mm): ±0.05 Repeatability W-axis (mm): ±0.03 Electrical Data Operating voltage/frequency (V/Hz): 400 / 50 Control voltage (V): 24 Total connected load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, easily readable from all sides Position display: Cartesian or polar, dimensions absolute or incremental Units: mm or inch, as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-dependent cutting data recommendations Tool management: Up to 500 tools Subprogram support: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible for each cycle Chip breaking / chip removal: possible during drilling cycle Drilling patterns: drill row, bolt circle, matrix Basic software: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted start Datum determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle determination for round parts by probing reference edges/surfaces Data interfaces Paintwork with signs of use Standard paint, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Test report for mechanics, electrical system, and safety equipment

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Drilling capacity in steel (diameter): 32 mm Throat depth: 636 mm Pgjdpfx Agewvl Irjmsr Maximum workpiece height: 720 mm Spindle speeds: 38 - 2000 rpm Thread cutting: 38 - 643 (rpm) Stroke: 450 mm Maximum spindle stroke: 170 mm Total power requirement: 6 kW Machine weight approx.: 1.9 t Space requirement approx.: 2.5 x 1.5 x 2.2 m Left/right rotation, thread cutting device Infinitely variable feed rate

Būklė: naujas, Gamybos metai: 2026, gręžimo pajėgumas: 40 mm, gerklės gylis: 1 220 mm, veleno greitis (min.): 110 aps./min, veleno greitis (maks.): 2 900 aps./min, bendras svoris: 1 710 kg, spindelio eiga: 200 mm, veleno tvirtinimas: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Tool holder short taper spindle: MK 4 Distance spindle center to column min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: Number x Width: 3 x 18 mm Podpfx Agjtzkmbemegr Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 - 1375 mm Spindle stroke: approx. 200 mm Feeds approx. (4): 0.08 - 0.1 - 0.2 - 0.3 mm/rev Main spindle speed range: stepless 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive motor power, spindle: 400 V, 50 Hz, approx. 2.2 / 4.0 kW

Būklė: naujas, Drilling capacity in steel (diameter): 40.0 mm Thread cutting: M30 Workpiece height – max.: 380 – 785 mm Arm reach: 985 mm Spindle taper: MT4 Drill head swivels right/left: -80 / +80 degrees Table surface: 1210 x 520 mm Speed range: 50 – 2000 rpm Column diameter: 220 mm Table surface: 1210 x 510 mm Quill stroke: 200 mm Feed range – spindle: 0.08 – 0.50 mm/rev Total power requirement: 2.2 kW Machine weight approx.: 2,800 kg Space requirements approx.: 2450 x 1200 x 2720 mm Features - Numerous clamping and machining options thanks to the design-specific construction - Electro-motorized height adjustment of the drilling head without altering the drilling position – ideal for deep-hole drilling - Drilling head swivels 180°, arm slides forward and backward, and is horizontally pivotable - Thread cutting device and 6 automatic feed rates included as standard - Large-dimensioned work table surface (1195 x 500 mm) for simultaneous clamping of multiple workpieces - Digital speed and drilling depth display included in delivery - Quick setup of the drilling head on the workpiece, clamping is achieved hydraulically - Strongly ribbed column ensures high rigidity of the arm - Solid construction enables vibration-free operation - Comes standard with electronically variable speed control Scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electro-motorized drill head adjustment Pgedpfx Asxaadysgmer - Initial fill with Shell Tellus 46 - Quick-action drill chuck 1 – 13 mm / B 16 - Drill chuck arbor MT4 / B 16 - Reducing sleeves MT4 / 3, 4 / 2, 3 / 1 - Thread cutting device - LED machine lamp - Coolant system - Height-adjustable protective cover

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Pgjdpfx Asyxw Ddsgmer Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table top min/max mm 70 / 680 Distance spindle nose – floor min/max mm 970 / 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining capacities Drilling capacity solid material: St 60 Ø 40 mm, GG 22 Ø 50 mm Thread cutting: St 60 M 36, GG 22 M 42 Main spindle drive AC Motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 (constant between 15 – 2000 min-1) Feed drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Stepless feeds: mm/min 5 – 2000 Accuracy Positioning accuracy (X, Y-axis over 1200 mm): mm ± 0.075 Electrical data Operating voltage/frequency: V/Hz 400 / 50 Control voltage: V 24 Hydraulic unit for clamping: kW 0.75 Total connected load: kVA 13.0 Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: kartesian or polar, absolute or incremental values Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-related cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selectable entry options Reference point determination: Cycles for determining reference points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – alignment of cast and flame-cut parts – Angle position detection on round parts by probing reference edges/surfaces Test graphic: Graphic display of drilling patterns

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1994, šilko eigos atstumas: 170 mm, gerklės gylis: 900 mm, galia: 3 kW (4,08 AG), Greita radialinė gręžimo staklė Gamintojas: HKS Tipas: HKS 34 MG Pagaminimo metai: 1994 Techniniai duomenys Gamintojas: HKS Tipas: 34MG Pagaminimo metai: 1994 Gręžimo veleno tvirtinimas: MK 4 Atstūmimas: maks. 900 mm Gręžimo našumas: 32/38 mm, žr. techn. lapą Gręžimo veleno eiga: 170 mm Atstumas velenas – stalas: 300 / 750 mm Variklio galia: 3 KW T-formos griovelių stalas: 1050 x 420 mm Išoriniai matmenys (PxGxA): 1400 x 2000 x 2450/2900 Svoris apie: apie 2000 Įranga - Sriegimo įrenginys - Hidraulinė kolonos ir sviries fiksacija - Aušinimo skysčio sistema - Pasukamas stalas 510 x 310 mm Visi duomenys pateikiami be garantijos. Demonstracija visada galima mūsų ekspozicijų salėje. Pgedpozbr Ibefx Agmjr

Būklė: naudotas, Gręžimo našumas pliene (skersmuo): 32 mm Išsikišimas: 950 mm Sukimosi greičio diapazonas: 102–2000 aps./min. Sukimosi greičio pakopos: 12 Gręžtuvinio veleno Morse kūgis: MK 4 Pinolės eiga: 160 mm Pleidimo diapazonas: 0,075 x 0,3 mm/min Pgedpfx Aexfb Haogmsr Stalo paviršius: 1200 x 510 mm Bendras galios poreikis: 2 kW Staklių svoris apie: 1,9 t Užimamas plotas apie: 1,8 x 1,2 x 2,25 m Greita radialinė su: 3 apdirbimo stalais, vienas pasukamas 2 stalo paviršiai 1200 x 510 mm 1 stalo paviršius 60 x 400 mm

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm Podpfjirax Ujx Agmsgr - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Gamybos metai: 1973, būklė: naudotas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 mm/min Spindle speeds - stepless: 70 - 2000 rpm Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Drilling radius max./min: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pcs. T-slot pitch: 18 mm Pgjdegmu A Sspfx Agmer Total power requirement: 2.2 kW Machine weight approx.: 1.8 t Space requirements approx.: m² Support travel: 590 mm Without rotary table, without tools

Būklė: naujas, SPS pavarų perjungimo plokštė Nauja vietoj senos Savarankiškam montavimui arba montavimui vieno iš mūsų technikų Psdpfxjy Rkkhe Agmegr

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge min.: mm 140 table upper edge max.: mm 740 Drilling radius min.: mm 540 max.: mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Values Drilling capacity, solid material St 60: mm 40 Pgjdpfx Aev If T Tjgmer GG 22: mm 50 Thread cutting St 60: M 36 GG 22: M 42 Main Spindle Drive AC Motor, frequency controlled kW 5.5 at 100 % duty cycle Speed range: rpm 15 - 2800 Torque: Nm max. 250 Constant from: rpm 15 – 200 Feed Drives X-axis - AC Servo Motor: kW 0.25 Y-axis - AC Servo Motor: kW 0.25 Z-axis - AC Servo Motor: kW 4.50 W-axis - AC Servo Motor: kW 2.50 U-axis - AC Servo Motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, stepless: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y axis on 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positioning accuracy Z-axis: mm ± 0.05 Repeatability Z-axis: mm ± 0.03 Positioning accuracy W-axis: mm ± 0.05 Repeatability W-axis: mm ± 0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X,Y,Z,W,U), expandable Display: TFT flat panel, backlit, clearly visible from all sides Position information: Cartesian or polar, measurements absolute or incremental Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions by machining process, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining cycles: cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible in every cycle Chip breaking/chip removal: possible in drilling cycle Drilling patterns: linear, circular, matrix Basic software: conversational programming, 38 zero point shifts, rotating and mirroring, teach-in for X, Y, Z, program restart with selectable entry point Zero point determination: cycles for zero point determination by manually probing the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angle position detection for round parts by probing reference edges/surfaces Data interfaces: USB interface Coating (Refinishing) Standard painting, two-component textured paint Machine upper part: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electrical schematic Spare parts drawings Test report for mechanics, electrics and safety device

Būklė: naudotas, Gamybos metai: 1976, Technical details: Drilling capacity in steel (diameter): 32 mm Throat depth: approx. 400 / 50 mm Horizontal travel distance of drill head: 400 mm Drill head vertical adjustment: 400 mm Quill stroke: 150 mm Spindle taper: MK 4 (Morse taper 4) Grinding spindle speed: 100 - 2000 rpm Throat depth spindle: min./max.: approx. 400 / 50 mm Column vertical adjustment: 850 mm Column horizontal adjustment: 400 mm Column length: 1360 mm Column, horizontal: swiveling mm/min Drill spindle speed: 100...2-step rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance table to underside of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Approx. machine weight: 1.8 t Machine dimensions (LxWxH): approx. 1.3 x 1.3 x 2.25 m Pgodpfxswi Iqvo Agmjr Equipment: 2x foot rails Mounting option for a vertical table Accessories: various clamping tools

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: Pgodeu Dg D Aopfx Agmor • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Pgjdpfjvv Spkjx Agmsr Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naujas, Atsarginės dalys Donau greitoms radialinėms gręžimo staklėms Donau DR Donau Danuflex Donau Danumeric Pedpfx Aey Ri H Iegmsgr Donau Danusys Donauflex Donaumeric