Aukštos spartos radialinė gręžimo staklės

DONAU Danuport 540

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge min.: mm 140 table upper edge max.: mm 740 Drilling radius min.: mm 540 max.: mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Values Drilling capacity, solid material St 60: mm 40 GG 22: mm 50 Thread cutting St 60: M 36 GG 22: M 42 Main Spindle Drive AC Motor, frequency controlled kW 5.5 at 100 % duty cycle Speed range: rpm 15 - 2800 Torque: Nm max. 250 Constant from: rpm 15 – 200 Feed Drives X-axis - AC Servo Motor: kW 0.25 Y-axis - AC Servo Motor: kW 0.25 Z-axis - AC Servo Motor: kW 4.50 W-axis - AC Servo Motor: kW 2.50 U-axis - AC Servo Motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, stepless: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y axis on 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positioning accuracy Z-axis: mm ± 0.05 Repeatability Z-axis: mm ± 0.03 Positioning accuracy W-axis: mm ± 0.05 Repeatability W-axis: mm ± 0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X,Y,Z,W,U), expandable Display: TFT flat panel, backlit, clearly visible from all sides Position information: Cartesian or polar, measurements absolute or incremental Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions by machining process, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining cycles: cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible in every cycle Chip breaking/chip removal: possible in drilling cycle Drilling patterns: linear, circular, matrix Basic software: conversational programming, 38 zero point shifts, rotating and mirroring, teach-in for X, Y, Z, program restart with selectable entry point Zero point determination: cycles for zero point determination by manually probing the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angle position detection for round parts by probing reference edges/surfaces Data interfaces: USB interface Coating (Refinishing) Standard painting, two-component textured paint Machine upper part: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electrical schematic Lhodev If T Tspfx Af Hjk Spare parts drawings Test report for mechanics, electrics and safety device

Būklė: naudotas, Diameter various Lsdpeww Nb Ejfx Af Hshk Quantity 36x Holder BT 40

Būklė: naudotas, rida: 112 997 km, galia: 96 kW (130,52 AG), pirmoji registracija: 06/1979, kuro tipas: dyzelinas, bendras svoris: 7 490 kg, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: mechaninis, pakaba: kitas, sėdimų vietų skaičius: 5, bendras ilgis: 6 700 mm, Įranga: autonominis šildytuvas, kruizo kontrolė, visų varančiųjų ratų pavara, vonios kambarys,

Būklė: geras (naudotas), Gamybos metai: 2013, Ref. Nr.: 10636 Gamintojas: TOS VARNSDORF Tipas: WHN 13 CNC Gamybos metai: 2013 Valdymo tipas: CNC valdymas Valdymo sistema: Heidenhain 530 Sandėliavimo vieta: Halberstadt Kilmės šalis: Čekijos Respublika X eiga: 3500 mm Y eiga: 2000 mm Z eiga: 1250 mm W ašis: 800 mm B ašis: 360° Stalo apkrova: 15 000 kg Įrankio tvirtinimas: SK 50 Sūkiai: 1400 aps./min Veleno sūkiai: 2000 aps./min Stalo matmenys: 1800 x 2200 mm Papildoma informacija: - 2013 m. valdymo sistema buvo perstatyta į HEIDENHAIN 530i. - Visi pavaros mazgai modernizuoti į skaitmeninius. Bokšto slėginis guolis taip pat pakeistas 2013 m. - Komplektacija: Lhedpfxezc D E Io Af Hek - 3D matuoklis – Heidenhain, didelė veleno atrama - 1x Heidenhain ašies modulis (pilnai atrestauruotas), - 1 naujas ašies modulis įmontuotas į stakles. - Nauji supakuoti atsarginiai dalių komplektai, staklių dangos. - Per pastaruosius metus visi staklių guoliai pakeisti. - Yra įrankiai ir frezavimo galvutės. Staklės iš pirmų rankų. Įranga vis dar prijungta prie tinklo ir naudojama gamyboje. Apžiūrėti galima pagal susitarimą.

Būklė: naudotas, Technical Details: Swing diameter over bed: 830 mm Swing diameter over cross slide: 540 mm Turning length: 3000 mm Swing diameter over support: 540 mm Centre distance: 3000 mm Faceplate diameter: 800 mm Rapid traverse X-axis: 4 m/min Control system: MTC K (Monforts) Speed range: 2 - 1,600 rpm Spindle bore: 88 mm Lhedpfx Aswmlknjf Hek Tailstock taper ISO: MK6 Tailstock quill stroke: 200 mm Max. workpiece weight between centres: 1,250 kg Max. workpiece weight, unsupported: 3,000 kg Swing diameter in gap: 1,200 mm Gap length: 310 mm Machine weight approx.: 6.85 t (without chip conveyor and coolant tank) Machine dimensions approx. LxWxH: 2.55 x 1.1 x 1.29 m CNC cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation/interpolation via NC control Chip conveyor by Kabelschlepp manufacturer 3-jaw chuck D=500 mm without jaws Various accessories

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 1 500 aps./min, veleno greitis (min.): 5 aps./min, padavimo ilgis X ašis: 1 200 mm, padavimo eiga Y ašimi: 2 000 mm, padavimo ilgis Z ašis: 700 mm, X ašies padavimo greitis: 1 000 m/min, Y ašies padavimo greitis: 1 000 m/min, padavimo greitis Z ašis: 1 000 m/min, bendras plotis: 4 000 mm, San Rocco horizontal boring mill, fully overhauled, from a high-quality aerospace manufacturing facility. CNC control: Siemens SINUMERIK 840D with SIMODRIVE 611 drive system. The machine is equipped with modern digital drives and is suitable for high-precision multi-axis machining in continuous operation. The machine was overhauled in 2024 and fitted with brand new telescopic covers on all axes, as well as numerous other minor but essential refurbishments to the hydraulics, CNC system, hoses, seals of all kinds. Machine is fully equipped with coolant system, etc. Travel axes: X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle specifications: Boring spindle diameter: 100 mm Tool holder: ISO 50 Milling spindle diameter: 185 mm Axial travel of spindle: 700 mm Feeds and rapid traverses: Automatic feed, spindle and vertical axis: 2 × 1,000 mm/min Rapid traverse, spindle and vertical axis: 5,500 mm/min Distances: Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance spindle nose to table center: 1,850 mm Spindle speeds: Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox steps: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table data: Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table feeds: Automatic feeds X and Y: 1,000 mm/min each Rapid traverse X and Y: 5,500 mm/min each Table rotation: Continuous rotation: 30 to 100 degrees per minute Ledpfx Afsx Rhlce Hohk Rapid rotation: 5,000 degrees per minute Drive system: Siemens SIMODRIVE 611 E R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and transport data: Group 1: Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel cables, Ø 22 mm Weight approx. 12,500 kg Group 2: Two steel cables, at least Ø 18 mm Weight approx. 3,500 kg Group 3: Manual lifting Weight approx. 1,300 kg Condition: The machine is in very good technical condition and can be inspected and tested under power by appointment.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB Lhedpfxovv Spkj Af Hsk

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Lhedpfsu Dg D Asx Af Hok Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Lhsdexn A Spopfx Af Hok Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Eigos X Y Z: 800 x 450 x 510 mm, stalo dydis: 1000 x 450 mm, stalo apkrova: 600 kg, veleno kūgis: BT40, veleno greitis: 12 000 aps./min., 30 pozicijų automatinis įrankių keitiklis, veleno galia: 18,5/11 kW, aušinimas per veleną, Siemens 828D valdymas. Lhjdpfxjzbhv Io Af Hjk