Greitaeigis radialinis grąžtas

DONAU Danumeric 440

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table top min/max mm 70 / 680 Distance spindle nose – floor min/max mm 970 / 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining capacities Drilling capacity solid material: St 60 Ø 40 mm, GG 22 Ø 50 mm Thread cutting: St 60 M 36, GG 22 M 42 Main spindle drive AC Motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 (constant between 15 – 2000 min-1) Feed drives Gujdoyxw Ddepfx Af Dsa X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Stepless feeds: mm/min 5 – 2000 Accuracy Positioning accuracy (X, Y-axis over 1200 mm): mm ± 0.075 Electrical data Operating voltage/frequency: V/Hz 400 / 50 Control voltage: V 24 Hydraulic unit for clamping: kW 0.75 Total connected load: kVA 13.0 Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: kartesian or polar, absolute or incremental values Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-related cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selectable entry options Reference point determination: Cycles for determining reference points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – alignment of cast and flame-cut parts – Angle position detection on round parts by probing reference edges/surfaces Test graphic: Graphic display of drilling patterns

Būklė: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Guedpfx Afef Sqckj Dea Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety devices Dimensions and Traverse Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance Spindle nose – table top min. mm 70 max. mm 680 Distance Spindle nose – floor min. mm 970 max. mm 1580 Drilling radius mm 540 - 1590 Godpfxsyuqmis Af Djua Work table height mm 900 Machining Capacity Max. drilling in solid material St 60 ⌀ 40 mm GG 22 ⌀ 50 mm Tapping St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rates, stepless mm/min 5 – 2000 Accuracy Positioning accuracy X/Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly visible from all angles, 215 x 160 mm Position display: Cartesian or polar, indication absolute or incremental, units in mm or inch or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine support: yes Machining Cycles Standard software options: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program restart with selectable entry points Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Alignment of cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Būklė: geras (naudotas), Gamybos metai: 1998, DONAU DANUMERIC 440, pagaminimo metai 1998 Techniniai duomenys: - Stalas 1800 x 600 mm, 4 T formos grioveliai Godpfx Ajyplb Rjf Doua - Gręžimo spindulys 540 – 1590 mm - Špindelio tvirtinimas SK40 - Apsisukimų skaičius 15 – 2800 aps./min. - Variklio galia 5,5 kW - Svoris apie 2 800 kg

Gamybos metai: 2001, būklė: naudotas,

Būklė: paruoštas naudoti (naudotas), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swiveling range: approx. 330° Column diameter: 195 mm You are welcome to come by for an inspection. We can gladly arrange cost-efficient shipping for you! You will receive a proper invoice. Guedpfxoyrdc Ss Af Doa For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. Brand names and trademarks mentioned are the property of their respective owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Gsdou Aa I Sepfx Af Dsua Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naujas, Universalioji frezavimo staklė Gamintojas: OPTimill Modelis: MT 50 Prekės Nr.: 3336005 Būklė: Nauja staklė Eigos: - X ašis: 580 mm - Y ašis: 200 mm - Z ašis: 340 mm Standartiškai komplektuojama su: Guodpfxebnfxuo Af Dea - 3 ašių skaitmenine indikacija DPA 31 PLUS - Automatinė X ašies pastūma - Ilgas frezos strypas 16 mm - Ilgas frezos strypas 22 mm - Gręžtuvo griebtuvo tvirtinimas B 18 - Dantytasis gręžtuvo griebtuvas 3–16 mm/B 18 - Redukcinis įvorė MK 2 su išstūmimo grioveliu - Redukcinis įvorė MK 3 su išstūmimo grioveliu - Mašinos šviestuvas - Aušinimo sistema - Eksploataciniai įrankiai - Naudojimo instrukcija

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive Gujdpfx Afsu Dg D Ao Dja AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Gusdpfxsrmkfnj Af Dsa Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: labai geros būklės (naudotas), 2 kėlimo sistemos, Kardex XP 500, apie 7,35 m aukščio, 240 arba 495 kg / lentyna, lentynos matmenys: apie 2,45 m x 81 cm – naudotos - : Kaina už vienetą iš vietos: 26.950 € (be PVM), išmontuotos, supakuotos ir pakrautos, papildomai apmokestinamas transportas ir sumontavimas! Gamintojas: Kardex Tipas: Shuttle XP-500-2450-813 Įrenginio numeris: 17001175/001 Pagaminimo metai: 2017 Leistina bendra apkrova: 2x33.500 kg Lentynos apkrova: light 240 kg / strong 495 kg Lentynų skaičius: bus pateikta vėliau Lentynos dydis: 2450 x 813 mm Įrenginio matmenys: Gusdex Ry Ddspfx Af Dsa Plotis: bus pateikta vėliau (turėtų būti apie 2,78 m) Gylis: bus pateikta vėliau (turėtų būti apie 2,92 m) Aukštis: apie 7.350 mm 3/N/PE400V, 17,0A, 5,6 kVA Būklė: gera – labai gera, iš viso mažai naudotas Prieinama: nuo apie 2026 m. sausio vidurio Vieta: 71063 Sindelfingen