Greitaeigis radialinis grąžtas

DONAU Danumeric 440

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Nlsdpfx Aju Aa I Sjduoi Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Nedporn Riqjfx Adusli Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Nlodpfx Asvv Spkjduji Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Nodpfxeu Dg D Ae Aduoli Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Sąlyga: geras (naudotas), Gamybos metai: 1990, CNC cylindrical grinding machine Manufacturer: TSCHUDIN Type: HTG 22 - 862, Year 1990 Equipped with MARPOSS E14 control system and E5 measurement-control system. Centre distance: 650 mm Centre height: 100 mm Grinding length: 620 mm Weight: approx. 4,500 kg. For further details, see: TECHNICAL DATA SHEET Includes numerous grinding wheels and holders. Complete machine documentation available. Machine in stock. Nodpfx Adjid Aphjusli

Sąlyga: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Table height: mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Operation in CCS version: After the material has been advanced and the vices have been closed, the cutting process is started. The lowering is performed by the saw’s own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch with provision for padlock, switch or speed changer, emergency stop, thermal-magnetic protection, 24V low-voltage system). Electronic band tension converter with display screen. Manual vice with quick-release locking. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for performing cuts of identical length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Nedpfx Aefg E H Tsdueli Tool kit and operating manual.

Gamybos metai: 2018, Sąlyga: naudotas, x-travel: 1600 mm y-travel: 1300 mm z-travel: 700 mm Distance between columns: 1500 mm Distance spindle center to table: 225-925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Pitch x Quantity): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 N.m. Rapid traverse in X-Y-Z axes: 30,000 mm/min Feed rates X/Y/Z axis: 1~20,000 mm/min Tool changer: 20 positions Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approximately: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A 63 Glass scales: Heidenhain Tool changer: 20 positions Chip conveyor - spiral: 2 units Used CNC high-speed gantry milling machine with extensive accessories at a special introductory price. Key component manufacturers for this stock machine include: · Controller and servomotors: Heidenhain, Type TNC 620 · Ball screw bearings: Japan NSK · X-axis ball screw: Taiwan Hiwin · Y-axis ball screw: Taiwan Hiwin · Z-axis ball screw: Taiwan Hiwin · 3-axis linear guideways: Japan THK or Germany Rexroth · Electric spindle unit: HSK A63-24,000 rpm by IBAG · Linear encoders: Heidenhain · Pneumatic system: Japan SMC · Lubrication: Japan Showa · Covers: Hema · Air conditioning: Taiwan Kaokung · Spindle water cooler: Taiwan-Punkt · 3-axis cable drag chain: Germany Igus · Coupling: Germany KTR · Machine enclosure: Germany Mecano · Relays: Omron · Electrical systems: Germany Schneider Nedpfxohx R Dvs Adusli · MPG handwheel: Japan Tosoku For more information about the machine, standard accessories, and special accessories, please refer to the attached documentation. Of course, we are also happy to organize delivery to your location including assembly/commissioning, handover ready for operation, as well as operator training.

Sąlyga: labai geros būklės (naudotas), Swing diameter over bed 320 mm Centre distance 800 mm Nledoi Ezhqepfx Aduji Spindle speeds up to 4000 rpm Control system: HEIDENHAIN Manual Plus M Various accessories MARCELS MASCHINEN CH

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2015, veikimo valandos: 985 h, X ašies eiga: 905 mm, Y ašies eiga: 705 mm, Z ašies eigos atstumas: 455 mm, ruošinio svoris (maks.): 3 000 kg, EDM314MF30 – SLM (Second Life Machine) Complete Overhaul Traverse Paths X x Y x Z: 900 x 705 x 455 mm Machine Table: 1150 x 850 mm Tank Size: 1200 x 900 mm Distance Table/Chuck: 260/710 mm Electrode Weight: 50/500 kg Max. Workpiece Weight: 3,000 kg Overall Machine Dimensions: 2210 x 3450 x 3250 mm Power Connection: 400V/three-phase/50/60 Hz Tank Height: 750 mm Equipment: Control Interface MF30 Movable Control Panel Touch Screen Display Lifting Speed: 15,000 mm/min (Highjump) EDM Generator 60A Integrated Chiller Cartridge Filter System 8-Station Tool Changer C-Axis with Direct Measurement, Resolution 0.0001° C-Axis for Positioning, Rotational, and EDM Applications C-Axis Speed: 100 rpm Automatic Tank Level Control Filling, Filtering, and Flushing Pump Transport Installation/Commissioning Training 12 Months Warranty Nedpfx Adohfaizsujli

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 6284, Offer 24033 Technical Data: - Thread cutting capacity: M 3 - M 24 - Working area (swivel radius): 1800 mm - Infinitely variable speed up to: 475 rpm - Digital depth adjustment - Torque: 140 Nm Nljdpfx Aert Unwodusi - Quick-change tool holder size 2, Ø31 mm - Various inserts for quick-change tool holder - Table surface: 1200 x 990 mm - Table height: 830 mm - Required space: approx. W 1250 x H 2000 x D 1000 mm - Weight: approx. 300 kg