Greitaeigis radialinis grąžtas

DONAU Danumeric 440

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Nodpfxsu Dg D As Abrjcn Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, PAGRINDINIS VERPTUVAS: Verptuvo galas: A2-8 Pagrindinio verpstuvo variklio galia: 18,5 kW Maks. pagrindinio verpstuvo apsukos: 4.000 aps./min Maks. verpstuvo perėjimo anga: 80 mm Maks. apdorojamas skersmuo: 366 mm C ašis: 0,001 laipsnio REVOLVERIS: Pozicijų skaičius: 12 vnt. Vairuojamų įrankių skaičius: 12 vnt. X/Z ašių eiga: 280 / 785 mm Y ašies eiga: +/- 50 mm Maks. varomų įrankių apsukos: 6.000 aps./min Ncsdpfox Rvgzjx Abron Varomų įrankių galia: 5,5 kW GALASTIEKIS: Kūgis: MK5 Atstumas tarp centrų: 705 mm ELEKTROS TIEKIMAS: Bendra galia: 39 kVA SVORIS IR MATMENYS: Užimama vieta: 3.800 x 2.143 mm Staklių aukštis: 2.232 mm Staklių svoris: 6.100 kg PRIEDAI: Valdymas: MORI MSX-850 II Įrankių matavimo įrenginys Detalių paėmimo įrenginys Drožlių transporterio Aušinimo skysčio rezervuaras Įrankių laikikliai ir valdomi įrankiai

Sąlyga: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Nsdpfx Ajrmkfnebrecn Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Nodpjvv Spkofx Abrocn Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Njdpfxsf Sqcke Abrocn Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Sąlyga: geras (naudotas), Gamybos metai: 2008, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, spaudimo jėga: 300 t, CNC crowning Hydraulic tool clamping EFL Easy Form Laser measuring & correction system Full tool set included Laser safety guard Controlled axes: Y1/Y2/X/R/V-Axis Max. bending length: 4000 mm Distance between uprights: 3150 mm Max. pressing force: 320 t Distance table-ram: 570 mm Max. stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Approach speed: 120 mm/min Working speed: 14 mm/min Return speed: 130 mm/min X-axis travel: 1000 mm Control unit: CADMAN Power: 42 kW Ncjdpfx Abjwrza Aeren Length: 5800 mm Width: 2300 mm Height: 3800 mm Weight: 23,000 kg

Sąlyga: naudotas, Gamybos metai: 2003, NAKAMURA TOME SUPER NTJ frezarka CNC PRODUCENT: NAKAMURA TOME, JAPONIA MODEL: SUPER NTJ ROK PRODUKCJI: 2003 STEROWANIE: FANUC 18 iT B UCHWYT: 210,0 mm MAKS. ŚREDNICA TOCZENIA: 200,0 mm ODLEGŁOŚĆ MIĘDZY KIEROWNICAMI: 780,0 mm ŚREDNICA RURY PRZELOTOWEJ: 80,0 mm Ncsdpfxjv I Tx Re Abrjn POSUWY: - OŚ X: 750,0 mm - OŚ Z: 130,0 mm WIEŻA NARZĘDZIOWA: 2 x 12 pozycji PRĘDKOŚĆ OBROTOWA WRZECIONA: do 5.000 obr./min PRZELOT WRZECIONA: 65,0 mm NOS WRZECIONA: A2-6 DODATKOWO: - CNC podajnik prętów krótkich - Wieża narzędziowa - Przenośnik wiórów - Dokumentacja / instrukcje obsługi

Sąlyga: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm Nedpolgvkijfx Abrocn - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Sąlyga: geras (naudotas), Gamybos metai: 2008, Geros techninės būklės, visiškai veikiantis. Pagaminimo metai 2008. Papildoma Y ašis ±60 mm. Didžiausias špindelio apsisukimų skaičius – 3 000 min⁻¹. Špindelio variklio galia 22/18,5 kW. Didžiausias varomųjų įrankių apsisukimų skaičius – 6 000 min⁻¹. Ncsdpfjxdcigex Abron - 300 mm griebtuvas su 90 mm skyle, A2-8 galvutė - Padidinta galia ir sukimo momentas – 25/30 kW, 1 000/1 300 Nm - Tekinimo skersmuo 420–500 mm - Tekinimo ilgis 1 250 mm - C ašis, varomieji įrankiai - NC užveržimo centras, visiškai programuojamas, atskiras variklis - Padidinta Z ašies galia - Naujas drožlių transporter

Sąlyga: geras (naudotas), Gamybos metai: 1997, sukimosi skersmuo virš skersinio stumduko: 60 mm, veleno skylė: 24 mm, ašies variklio galia: 7 500 W, sukimosi greitis (min.): 30 aps./min, sukimosi greitis (maks.): 5 000 aps./min, bendras aukštis: 1 660 mm, bendras ilgis: 1 700 mm, bendras plotis: 1 240 mm, bendras svoris: 1 420 kg, CNC tekinimo staklės su spaustuvo patronu F38 Didžiausias tekinimo skersmuo Ø 200 mm, eigų ilgiai X/Z 180/255 mm, įrankių bokštelis SAUTER 8 pozicijų VDI20 (16x16 mm), velenas 7,5 kW, veleno galas A2-4, sūkių diapazonas 30-5000 aps./min., strypo pravedimas Ø 32 mm, tuščiaviduris veleno atmušas, valdymas FANUC Series T-20, vadovai Ncedevu Tvpepfx Abron