CNC tekinimo staklės

SCHAUBLIN 125-CCN R-T

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, veikimo valandos: 2 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 350523, Įranga: CE žymėjimas, Voltage: 380V Net weight: 1,400 kg Customs tariff number: 8458.1120 Dimensions: 180 x 128 x 172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter over cross slide: 115 mm Center height over cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm HEADSTOCK A2-4 / Camlock D1-3’’ Spindle for collets Schaublin Hainbuch / F38 / B32 Spindle speed: 50 – 5,000 rpm AC motor drive – continuous/intermittent power: 5.5 / 7.5 kW AC motor drive – continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bar: 1,150 daN CROSS SLIDE Transverse travel, X-axis: 190 mm Resolution, X-axis (radial): 0.0005 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 32 x 5 mm Kdedpfox Upugox Af Ieg FEEDS Working feed, X and Z axes, stepless: 0 – 5 m/min Rapid traverse, X and Z axes: 8 m/min REVOLVER TOOL SYSTEM Standard tool holder interface: VDI 20 Number of fixed/rotating tool stations: 8 / - Max. tool size: 16 x 16 mm Integrated coolant supply and bi-directional indexing: Yes COOLANT Tank capacity: 55 L Pump capacity: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Quill outer diameter: 45 mm Quill stroke: 70 mm Adjustable thrust force: 25 – 260 daN All technical data is provided without obligation and subject to errors or omissions. Fully overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Headstock: Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. New paint. Turret: Disassembled, cleaned, worn and defective parts replaced, newly painted, and mating surfaces skimmed. Tailstock: Disassembled, inspected, and overhauled. Newly painted. Hydraulics and pneumatics: Disassembled, motor checked, hoses and worn/defective parts replaced. X-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Z-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Electrical cabinet: Completely checked, various relays replaced. Paint: Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer's protocol. Various accessories checked and cleaned. Year: 2002

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, For sale is a partially refurbished Deckel FP1 milling machine with 3-axis Heidenhain TNC113 active control, notable for its user-friendly operation. This newer model, manufactured in 1989, features central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary/swivel tilting table Ksdpfx Afopy Eldo Iodg Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering. - All machines undergo thorough inspection. - All lubricants and, if necessary, worn parts are replaced beforehand. - On request, we can provide a complete or partial overhaul of the selected machine. - You can order additional accessories such as tools, etc., directly with your purchase. - On request, additional features such as safety equipment can be supplied and installed. - We are happy to arrange shipping and/or machine installation for you.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 5 650 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS Bar Loader Fanuc 31iB – 5,646 operating hours Country of Manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub-spindle Maximum bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Tool set 2 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm End unit Number of positions: 4 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Subsequent machining Number of positions: 6 Number of driven positions: 6 Kedpfxjkhnqgj Af Iedg Speed of driven tools: 8,000 rpm Electrical supply Mains voltage: 400 V All technical specifications are provided subject to errors and omissions.

Sąlyga: naujas, High-performance thread cutting machine with leadscrew and optimal safety device to prevent tool breakage. Program mode for single or continuous cycle operation. Electronically controlled motor braking in single cycle mode. Easy leadscrew change via quick coupling. Kdjdpfegv I Unox Af Iog Technical Data UNIMAX 3T GL: Thread cutting capacity: M 4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MT 3 Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle/table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, reverse gear disengagement, externally ventilated motor, die holder, flange quill, foot impulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Control: Fanuc 21T Turning diameter: 158 mm Kdjdpowmzhpofx Af Ijg Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm 8-position turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Wide range of tool holders

Sąlyga: naujas, KNUTH hidraulinis vamzdžių lankstymo įrenginys 1/2 (1/2"–2") iš vamzdžių lankstymo mašinų kategorijos – tai galingas ir kompaktiškas sprendimas vamzdžių ir profilių apdirbimui. Ši mobilioji vamzdžių lankstymo mašina aprūpinta rankine hidrauline pompa ir puikiai tinka didesnio skersmens plieninių vamzdžių lankstymui. Su 10 t slėgio jėga galima vamzdžius lankstyti iki 90° naudojant matricas, kurios padengia populiariausias vamzdžių dimensijas. Pridedamas trikojo stovas užtikrina stabilumą ir patogumą lankstymo metu. Kompaktiška konstrukcija leidžia įrenginį lengvai naudoti skirtingose vietose. Galite būti tikri, kad šis tvirtas vamzdžių lankstymo įrenginys atitiks jūsų poreikius. Norėdami gauti daugiau informacijos arba užsisakyti, nedvejodami pateikite užklausą internetu. Atraskite vamzdžių lankstymo įrenginių privalumus ir pasirūpinkite šiuo efektyviu KNUTH įrenginiu jau dabar. Kodouzlh Ijpfx Af Isdg

Sąlyga: naudotas, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T, ASA 5. Main spindle power 15 kW. Self-centering chuck diameter 175 mm. ASA 5 spindle mount. Bar capacity 52 mm. Turning diameter 230 mm. Turning length 500 mm. Spindle speed 5000 rpm. Number of tool turrets: 1. Number of tool stations in the first turret: 12. Number of live tools in the first turret: 12. First turret tool interface: VDI 30. X-axis travel 160 mm. Y-axis travel +/- 32 mm. Z-axis travel 550 mm. Rapid traverse feed (X, Y, Z): 30 m/min. Sub-spindle: yes. ASA 5 spindle nose. Sub-spindle speed 5000 rpm. Sub-spindle power 9 kW. Sub-spindle bar capacity 30 mm. Bar feeder make and model: LNS with single bar tube. Chip conveyor: belt type. Presetter: yes. Year: 2000. The machine is in our warehouse in Gussago BS, powered up. Mimu Machine Tools, Italy. Ksdpoqn E U Tjfx Af Isdg

Gamybos metai: 1960, Sąlyga: naudotas, Surface grinding machine with magnetic chuck 250 x 135 Kodpfeiuz Tgex Af Isdg 400 Volt, power 1.8 kW

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 109 078 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, greitasis eiga Z ašyje: 45 000 m/min, valdiklio modelis: Siemens 840 D, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašina įjungta: 109078 val. Veleno įjungta: 22117 val. - Velenas HSK-A63, 10000 aps./min - 32 įrankių vietos - Apvalus stalas SRT 280 mm su integruota SK50 tvirtinimo sistema (jei nereikalinga, galima uždaryti arba perkonstruoti kaip nulinio taško tvirtinimo sistemą) - Išorinė aušinimo skysčio tiekimo sistema - Vidinė aušinimo skysčio tiekimo sistema su popierinio juostos filtru, 80 bar - Drožlių nuplovimo pistoletas - Drožlių transporteris Kodpfx Afexcp Sls Iodg - Rankinis valdymo modulis - Automatinės kabinos durys - 32 įrankių vietos ir dar 87 vietos ZM87 - Šiluminė kompensacija - BLUM įrankių matavimo sistema Wange - Matavimo zondas Renishaw - Drožlių talpykla - Būklės signalinė lempa Mašina pilnai patikrinta, yra geometrijos protokolas ir apvalumo testų matavimai. Mašiną galima apžiūrėti ir išbandyti prijungtą prie elektros bet kada. Labai gerai prižiūrėta būklė.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11666, Rotor diameter: 280 mm Kdjdsghgq Nopfx Af Iog Rotor width: 300 mm 3-knife rotor 2 rows of stator knives Infeed cross-section approx. 300 x 280 mm Drive motor 11 kW Equipped with noise protection enclosure, noise protection hopper, and extraction fan