Hidrauliniai dvigubų stulpų presai ir keturių stulpų presai pirkti naudotą (321)

Gamybos metai: 1976, Sąlyga: naudotas, Pressure 250 t Column gap 900 mm Stroke 300 mm Table size 850x900 mm Ram area 800x880 mm Pgodolp U A Sopfx Af Njg Stroke 300 mm Table height 1050 mm Machine number: 1554 Blankholder cushion (150 mm stroke) Sick BWS for safety and automatic operation Mechanical depth stop Strip lubrication by Raziol

Gamybos metai: 1976, Sąlyga: naudotas, Pressure: 100 t Frame gap: 625 mm Stroke: 150 mm Table surface: 580x450 mm Ram surface: 580x340 mm Through-hole in table: Ø 150 mm Table height: 850 mm Pin hole in ram: Ø 45 mm Lateral frame opening: 200x200 mm Machine weight approx.: 6.0 t Space requirements (WxDxH): approx. 1300x1300x2750 mm Pgsdpfx Afelp U Euo Njg Fixed stop adjustment Pressure and stroke limit shut-offs Two-hand operation Rapid work cycle Rollbloc rails in the table Approved for manual loading operations

Gamybos metai: 1991, Sąlyga: naudotas, Pressing force 150 t Clear width 1100 mm Stroke 500 mm Table surface 1100x1070 mm Ram surface 1100x1070 mm Passage opening in table 475x450 mm Table height 920 mm Podpolp U R Defx Af Nsgg Installation height 800 mm Machine weight approx. 8 t Space requirement approx. WxDxH 2000x2000x3600 mm Four-column guided Synchronous control

Sąlyga: naudotas, Gamybos metai: 1980, Pressure: 20 t Column gap: 450 mm Stroke: 100 mm Table size: 440 x 320 mm Podovnwd Djpfx Af Nsgg Ram surface: Ø140 mm Table through-hole: Ø50 mm Table height: 900 mm Ram pinhole: Ø40 mm Total power requirement: 3 kW Machine weight: approx. 2 t Space requirement (W x D x H): approx. 1400 x 1200 x 2200 mm Sick light curtain for safety and cycle mode Mechanical fixed stop adjustment Stroke and pressure cut-off Two-hand operation Foot pedal operation

Sąlyga: paruoštas naudoti (naudotas), Hydraulic press, single-column rapid stroke press, C-frame press, oil-hydraulic press - Ram pressing force: approx. 35 t - Clamping table: 500 x 470 mm - Insertion height: 650 mm - Insertion width: 275 mm - Dimensions: 1300/900/H3200 mm - Machine can be dismantled to: H2700 mm - Weight: approx. 1500 kg Pgedpfx Asb A Nkbsf Nsg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 630 t, stalo plotis: 1 800 mm, stalo ilgis: 1 600 mm, bendras svoris: 80 000 kg, Įranga: apsaugos šviesos užtvara, Siempelkamp FH 4_1_630T press Pgjdsv E N Rqspfx Af Njg A press in very good technical condition available for sale from a decommissioned stamping facility in Poland. Upgraded in 2024. Equipped with a new Simatic S7 control system and a new electrical cabinet. Optical safety barriers installed. The machine can be inspected under power – the press remains connected and operational.

Sąlyga: naudotas, Double-Column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Deep Drawing Press Machine No. 3973 Year of manufacture: 1983 Pressing force: 125 tons Column width: 1050 mm Lateral column clearance: 550 mm Table surface: 1000 x 800 mm Ram surface: 1000 x 800 mm Ram stroke: 350 mm Maximum installation height: 750 mm Table height above floor: 960 mm Drawing cushion force: approx. 12 tons at 105 bar Drawing cushion stroke: 100 mm Table opening diameter: 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor output: 22 kW Control pump motor output: 4 kW Control pump motor output: 2.2 kW Podpfx Afsguvtle Nogg Power supply: 400 Volt, 50 Hz - Hydraulic drawing cushion under the table with borehole through the tabletop, Ø 202 mm - Precise four-column guiding system at the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable limit stop via hydraulic motor - Shearing impact damping system - Two-hand control panel for stroke activation at the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating manual, electrical circuit diagram, and PLC program printout available Space requirements of the press (L x W x H): 2600 x 2400 x 4270 mm Weight: approx. 14 tons In good condition

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil collection mats. Does not include a packaging table—only briquette guides (rails) are provided. Comes standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. Please contact us first regarding this press! Psdpfxetmugcj Af Nsgg Technical Data: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 liters Filters: 4 Length: 2000 mm Width: 2000 mm Height: 2200 mm Weight: 3500 kg Briquette size: 40–110, D80 mm Warranty: 2 years / 2,000 operating hours

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, Hans Schoen NH/LF 200 (UVV) – powerful & robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic double-column press (UVV inspected) 📅 Year of manufacture: approx. 1988 (varies depending on machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing operations • Hydraulic drive for precise force and stroke control • Column gap: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distances • Table surface: approx. 1,000 × 1,200 mm – large clamping surface • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (mostly with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 The robust design makes this press ideal for series production, drawing and forming processes, as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure shut-off • Pressure switch • UVV-compliant safety measures → Everything for efficient and safe workshop operations Currently UVV-inspected. ⸻ 🛠️ Areas of Application Podsx Ry Nyopfx Af Negg This press is highly versatile, for example in: • Metal forming / drawing operations • Assembly and joining part production • Inspection and quality control processes • Series and small batch manufacturing ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – solid industrial design

Sąlyga: geras (naudotas), Gamybos metai: 1991, For sale is our Hydrap 160 ton press with decoiler (year 1999) / straightening machine (year 1999) / feeder unit (2004). The system is only available as a complete package. Operating hours: 20,242 Condition: Good condition Inspection possible and encouraged. Location: Szügy / Hungary Pgodpfx Aotu Szlef Nsg

Sąlyga: naudotas, Gamybos metai: 1986, Total pressing force: 500 t Stroke: 1100 mm Installation height: 1500 mm Table clamping surface approx.: 2000 x 1250 mm Ram clamping surface approx.: 2000 x 1250 mm Blankholder force in table: 160 t Blankholder stroke: 300 mm Rapid traverse from: 650 mm/s Power requirement: 55 kW Machine weight approx.: 50 t Standard equipment The press was completely overhauled mechanically, hydraulically, and electrically in 2008. Pgjdpfx Aeuqdqlef Nsg

Sąlyga: naudotas, Gamybos metai: 1996, mašinos/transporto priemonės numeris: 14.194, Total pressing force: 80 - 800 t Ram stroke: 1600 mm Pedpfx Asu Saaaef Nsgg Distance between uprights (L-R): 2850 mm Distance between uprights (front-back): 1000 mm Installation height: 1900 mm Table clamping area approx.: 2800 x 2000 mm Ram clamping area approx.: 2800 x 2000 mm Cushion force in table: 32 - 320 t Cushion stroke: 400 mm Cushion area: 2500 x 1700 mm Rapid traverse downwards: 400 mm / s Working speed: 5 - 42.7 mm / s Rapid traverse upwards: 420 mm / s Power requirement: 246 kW Height above floor approx.: 7785 mm Machine weight approx.: 100 t Number of sliding tables: 1 pc.

Sąlyga: naudotas, Gamybos metai: 2002, mašinos/transporto priemonės numeris: 10857, Total pressing force: 315 t Stroke: 1100 mm Installation height: 2200 mm Table clamping area approx.: 2500 x 1000 mm Ram clamping area approx.: 2500 x 1000 mm Max. tool weight on ram: 6000 kg Rapid traverse down: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s Power requirement: 158 kW Machine weight approx.: 44 t Height above floor level approx.: 6175 mm Podpfx Afevmfzbo Njgg Automation

Sąlyga: naudotas, Gamybos metai: 1989, Total pressing force: 1400 t Stroke: 950 mm Installation height: 2000 mm Table clamping area approx.: 3600 x 2500 mm Ram clamping area approx.: 3600 x 2500 mm Cushion force in table: 400 t Pedpfxsuqdi Uo Af Nogg Cushion stroke: 500 mm Cushion area: 3060 x 1860 mm Rapid traverse down: 400 mm/s Working speed: 40 / 80 mm/s Rapid traverse up: 400 mm/s Oil volume approx.: 5000 l Power requirement: 450 kW Machine weight approx.: 240 t Standard features: Equipped with hydraulic tool clamps on the ram

Sąlyga: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 18282, Total pressing force: 140 t Stroke: 800 mm Installation height: 1,004 mm Distance between uprights (L-R): 2,060 mm Table clamping area approx.: 2,000 x 520 mm Ram clamping area approx.: 2,040 x 520 mm Working speed: 4–20 mm/s Rapid traverse: 135 mm/s Return speed: 120 mm/s Machine weight approx.: 14 t Height above floor approx.: 4,810 mm Oil capacity approx.: 700 l Standard equipment: Podpfxjuqd Nuj Af Nsgg The press is equipped with a frontally extendable sliding table, which can be extended by 500 mm. Water cooler SICK light curtains on the front and rear SIEMENS S7-300

Sąlyga: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 18282, Total pressing force: 140 t Stroke: 800 mm Installation height: 1,004 mm Distance between uprights (L-R): 2,060 mm Table clamping area approx.: 2,000 x 520 mm Ram clamping area approx.: 2,040 x 520 mm Working speed: 4–20 mm/s Rapid traverse: 135 mm/s Return speed: 120 mm/s Psdpfx Aeuqd S Asf Nsgg Machine weight approx.: 14 t Height above floor approx.: 4,810 mm Oil capacity approx.: 700 l Standard equipment: Press is equipped with a frontally extendable sliding table, extendable by 500 mm. Water cooler. SICK light curtains at the front and rear.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: MURARO Modelis: ID500/250 Metai: 2001 Būklė: Naudotas Sandėlio numeris: Cod. 0114 Didžiausias viršutinio stumoklio slėgis: 500 t Stumoklio eiga: 900 mm Maksimalus vertikalus tarpas: 1 500 mm Stalo matmenys: 2 700 x 1 600 mm Stumoklio matmenys: 2 700 x 1 600 mm Lakšto spaudimo stalo matmenys: 2 450 x 1 250 mm Stumoklio priartėjimo greitis: 650 mm/sek (priartėjimas) Pgsdox R U R Eopfx Af Neg Lakšto spaudimo pagalvė – bendra jėga: 250 t Apatinės lakšto spaudimo pagalvės eiga: 400 mm Preso aukštis nuo grindų: 5 600 mm

Sąlyga: naudotas, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine no. 5509 Year of manufacture: 1971 Pressing force 50 tons Column width 550 mm Lateral opening between columns 150 mm Table size 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Maximum ram stroke 150 mm Maximum installation height 390 mm Table height above floor 890 mm Rapid approach speed approx. 130 mm/sec Working speed approx. 20 mm/sec Return speed approx. 130 mm/sec Motor power 4 kW Power supply 380 Volt, 50 Hz - Infinitely variable press force adjustment - Rapid stroke and working stroke - Pressure or stroke dependent stroke limitation - Adjustable pressure holding time, pressing time extension 0.5-6 s - Mechanically adjustable fixed stop via handwheel on ram - SICK light barrier, type LVU - Stroke counter - Double column guide on ram Space requirements (L x W x H) 1100 mm x 1050 mm x 2320 mm Pgjdpfx Afov Srfwe Nsg Weight approx. 1.5 tons In good condition

Sąlyga: naudotas, Double Column Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Machine No. 707 Year of manufacture: 1994 Pedpfjv Srfdsx Af Negg Press force: 60 tons Column width: 1090 mm Side clearance: 275 mm Ram surface: 890 x 540 mm Table surface: 990 x 540 mm Max. ram stroke: 300 mm Installation height: 390 mm Table height above floor: 900 mm Hydraulic operating pressure: 250 bar Rapid approach downward: 47 mm/s Rapid return upward: 75 mm/s Working speed: 15 mm/s Return speed: 37 mm/s Motor power: 15 kW (2 x 7.5 kW) Electrical connection: 400 Volt, 50 Hz, 15.85 kW - SICK light curtain, Type LVS 600 - Manually adjustable limit cams for stroke limitation - Press force adjustment via handwheel - Infinitely variable dwell time setting - Two-hand operator control at the machine - Ram plate additionally guided by 2 lateral guiding rods, Ø 50 mm - Table plate with 18 mm T-slots, slot pitch 185 mm - Through hole in table plate Ø 100 mm with reducing insert to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet mounted on the side of the machine frame - 3 monitored safety valves for hydraulics - UVV conformity for manual loading operations - Electrical circuit diagram Installation dimensions (L x W x H): 1900 x 1350 x 2570 mm Weight: 3.1 tons In good condition

Sąlyga: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 50 /92-NG 600/15 kW/32Liter, spaudimo jėga: 130 t, darbinis greitis: 80 mm/s, bendras svoris: 3 500 kg, Hidraulinis tiesinimo presas Gamintojas: G +K Psdpsxr Rnasfx Af Njgg Pagaminimo metai: 1992 Maks. spaudimo jėga: 130 t Apatinio stalo dydis: 800 x 500 mm su T formos grioveliais Viršutinio stalo dydis: 800 x 500 mm su T formos grioveliais Montavimo matmuo: 1000 mm Sistemos slėgis: 250 bar Elektros variklis: 15 kW Svoris: 3400 kg Darbinė įtampa: 380 V AC, 24 V DC Valdymas atnaujintas prieš 5 metus 2 apatiniai stalai 800 x 500 mm

Sąlyga: naudotas, Pressing force: 400 kN, Table size: 450 x 560 mm, Slide size: 375 x 300 mm, Distance table to slide: 340 mm, Stroke: 160 mm, Pass-through hole: 100 mm diameter, Side column passage: 220 x 410 mm Pgodpeum Uuyefx Af Njg

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally designed as an automatic transfer press, the machine was converted to manual operation in 2012, but can be rebuilt for automatic use. The press is still assembled, powered on, and in very good condition. Year of construction: 2001 Pressing force in t: 200 Oil capacity in liters: 1100 Stroke in mm: 300 Table dimensions (LxW) in mm: 600 x 600 Installation space in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12,000 Operating pressure in bar: 6 Rapid approach lowering speed in mm/sec: 375 Pedpfx Afohfwqzs Negg Working speed in mm/sec: 18 – 40

Sąlyga: naujas, New hydraulic high-speed presses from min. 300t up to max. 2500t. We provide new mechanical and hydraulic presses for various applications, tailored to your specific requirements. Simply let us know your needs and we will prepare an attractive offer including installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be an official distribution partner since 2020 and look forward to your inquiry. Pjdpfx Asf Rt Irof Njgg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 6 000 mm, įrengimo aukštis: 1 000 mm, bendras plotis: 2 400 mm, bendras ilgis: 3 500 mm, spaudimo jėga: 500 t, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, bendras svoris: 45 000 kg, alyvos bako talpa: 1 200 l, Įranga: apsaugos šviesos užtvara, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Test Press for Toolmaking and Forming Technology The machine is a tryout/test press designed for tools used in forming, deep drawing, and toolmaking applications. It is fully functional, ready for operation, and can be inspected and tested under power. The press features a 4-column design, a spacious working area, and a hydraulic system equipped with REXROTH pump technology. Control is via a SIEMENS S7-1200 with touch panel and extensive parameter-setting capabilities. Scope of delivery & accessories: - Tool sliding and lifting ball system by GÜTHLE - Hydraulic foot pedal (GÜTHLE) - Roller support/beams console 10 t (GÜTHLE) - 4-channel tool holder system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic power unit - Air cooler - Foundation plans / manufacturer's documentation Condition of the machine: - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electrics in good condition - Mechanically sound with no visible damage - The machine is assembled and can be demonstrated under power. Press Force: - Nominal force: 500 t - Max. pressing force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions: approx. 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working Area: - Table size: 2000 × 1500 mm - Inside column spacing: 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measurement system) - T-slots present (receivers defined by customer) Podpfx Asx D Tv Dof Negg Hydraulic System: Main Cylinders - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/platen cylinders - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Draw cushion - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1,200 L - Oil system: 1,000 L capacity Speeds: - Advance stroke: 120 mm/s - Return stroke: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: - Control - SIEMENS S7-1200 + ET200S - 12" Touch panel Schneider Electric - Operation modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without draw cushion - Deep drawing mode with draw cushion - Measuring & safety components: - Novatechnik linear measurement system (63 Bit) for ram & draw cushion - SICK light curtains front and rear (height: 1050 mm) - Side safety fences with limit switches - Remote maintenance via Ethernet possible - Mobile control console International notice (DE/EN): German Disassembly, removal, loading, and transport are the sole responsibility and at the expense and risk of the buyer. The seller does not provide equipment, personnel, or loading assistance. Pickup only after prior scheduling. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Sąlyga: geras (naudotas), Gamybos metai: 1973, spaudimo jėga: 315 t, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, Hidraulinė 4 kolonų presas, gamintojas FIBRO, pagaminimo metai 1973, presavimo jėga 315 t. Matmenys apie 3,0 m × 1,6 m × 4,5 m. Stalo dydis 2,5 m × 1,5 m. Atskiras hidraulinis agregatas ir valdymo pultas. Maksimalus darbo diapazonas 883 mm (stūmoklis pilnai įtrauktas). Pgsdpox Nhakofx Af Nsg Pajungtas prie elektros, galima apžiūrėti vietoje. Visa informacija pateikta pagal geriausias žinias ir sąžinę. Galimi pakeitimai, klaidos ir tarpinis pardavimas.