Hidraulinis nuleidimo presas

Sack & Kiesselbach EP 630

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Pressing force: max. 630 tons Installation height: max. 375 mm Chedegwv S Uopfx Admof Stroke: max. 275 mm Weight: 4,500 kg.

Gamybos metai: 1974, Sąlyga: naudotas, Druck: 340 t Hublänge: 200 mm Tischgröße (unten): 100 x 800 mm Codpfx Ade Du Uwsmehf Abstand zwischen Ober- und Untertisch: - offen: 510 mm (Lichtöffnung) - geschlossen: 310 mm Neue Hydraulik- und Elektrikanlagen

Sąlyga: geras (naudotas), 1 used die press Manufacturer: SACK & KIESSELBACH Year of manufacture: 1962/74 Serial number: 31900 Press force: 630 t Cjdpfx Ajul U Svjdmohf Stroke: 310 mm Closed height: 320 mm Working height: 1200 mm Drive power: 10 kW

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, We are offering for sale a partially overhauled Deckel FP1 with a 3-axis TNC113 active control, which stands out for its particularly user-friendly operation. This newer version from the year 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to inspect on-site. As part of the partial overhaul, the following work, among others, was carried out: - Spindle bearings of the milling head replaced - Repainting - Various standard parts such as handles, oil sight glasses, buttons, etc. replaced - Wear parts such as drive belts, etc. replaced - Some bellows replaced - Gib strips adjusted - and much more… Delivery time: immediately Year of manufacture: 1989 Machine no.: 2102-xxxx Table: fixed angle table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid traverse: 1200 mm/min Chsdpfxjpy Eldj Admef Equipment and accessories: coolant system, central lubrication, manual, machine mounts Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can overhaul your chosen machine either completely or partially - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation

Sąlyga: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg Cedpjnzpx Rofx Admehf

Sąlyga: labai geros būklės (naudotas), Brand: KENT Model: KGS-250AHD Type: Tangential Working surface: 460 x 200 mm Longitudinal travel: 540 mm Cross travel: 260 mm Distance from spindle centre to table: 490 mm Maximum load on table including magnetic chuck: - 250 series: 103 kg Chedpfx Adjh Ha Ipjmsf - 818 series: 150 kg T-slot: 14 x 1 mm/N Table longitudinal speed: 5–23 m/min Cross feed handwheel: 1 division = 0.02 mm, 1 revolution = 4 mm Automatic cross feed per stroke: 0.1–5.5 mm Automatic feed: - 50 Hz: 820 mm/min - 60 Hz: 980 mm/min Grinding wheel size: 180 x 13 x 31.75 mm Spindle speed: - 50 Hz: 2850 rpm - 60 Hz: 3480 rpm Vertical handwheel: 1 division = 0.01 mm, 1 revolution = 2 mm Automatic downfeed increment: 0.002–0.02 mm Spindle motor: 2 x 2 HP (XP) Elevation motor: Not applicable Hydraulic pump motor: 1 x 6 HP (XP) Coolant motor: 1/8 x 2 HP (XP) Cross feed motor: 1/5 x 6 HP (XP) Machine height: 1775 mm Machine dimensions: 3260 x 2460 mm Net weight: 1300 kg Gross weight: 1500 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermal Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Maximum Pressing Force: 4000 kN - Maximum Uplift Force: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 seconds Dimensions: - Length: 3,800 mm Chsdpfx Asph Uk Nsdmjf - Width: 4,475 mm - Maximum Opening Width: 800 mm - Stroke: 800 mm - Table Height above Floor: 1,100 mm - Total Height above Floor (Construction Height): approx. 4,300 mm - Minimum Hall Height: 5,500 mm Parallelism Deviation at 20°C: +/- 0.1 mm Deflection: - Determined at maximum closing force with 70% utilization:

Gamybos metai: 1988, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 170167, Ciążność (mm): 8,5x50 Wydajność (maks.): 250 szt./min Chodpfodwmciox Admjf

Gamybos metai: 1983, Sąlyga: geras (naudotas), 1 console milling machine Make: RECKERMANN, Model: KOMBI 900, Year: 1983, Serial No.: 6367P, Table size: 1,000 x 310 mm, Travel (X/Y/Z): 720 x 220 x 450 mm, Tool holders: SK 50, Heavy-duty machine vice, Chedpeh E Du Dsfx Admsf Spindle speeds: 3...2800 rpm

Sąlyga: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) Cedpfot Hw N Tjx Admjhf CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.