Sąlyga: labai geros būklės (naudotas), Motor 0.75 kW Number of spindles: 4 Maximum material thickness: 11 cm Pedpfstrtz Tox Ah Hjpl Number of pawls: 3

Gamybos metai: 1986, Sąlyga: labai geros būklės (naudotas), 220 V 0,5 kW variklis Ppedpfjkhbl Ijx Ah Hsl Pasiekiamumas 6 cm

Sąlyga: labai geros būklės (naudotas), Table length 200 cm Table width 130 cm Pjdpfepq Sauox Ah Hjpl 1 motor 1.8 kW 2 motors 1.8 kW 7 spindles per motor Maximum distance between spindles 124 cm

Sąlyga: labai geros būklės (naudotas), Drilling depth: 14 cm Drilling height: 14 cm Ppedpfxeupz Tzo Ah Hsl Drilling width: 23 cm 2 kW motor Very good condition.

Sąlyga: labai geros būklės (naudotas), 7 spindles Adjustable spindle spacing Minimum distance 5.5 cm Maximum 120 cm Ppjdsttaigspfx Ah Hel Three 1.1 kW motors Maximum working height 20 cm Pneumatic

Sąlyga: labai geros būklės (naudotas), 1.1 kW motor Table with corners Drilling depth: 12 cm Ppedpfx Aeumk H Ssh Hjl Maximum material height: 110 cm

Sąlyga: labai geros būklės (naudotas), 0.75 kW motor Ppjdpfxstrtz Ee Ah Hjl 8 spindles 2 pneumatic clamps 6 pawls

Sąlyga: labai geros būklės (naudotas), Drilling Machine Pade Ppedpjttlbgofx Ah Hel Model: 3L MATIC

Sąlyga: labai geros būklės (naudotas), Labai geros būklės. Pjdpfx Ahovcyzns Hjpl

Sąlyga: labai geros būklės (naudotas), Motoras 0,75 kW Spinduliai 4 vnt. Pjdpfxotrt Aqo Ah Hepl Didžiausias medžiagos storis 10 cm Užraktų skaičius 4 Pneumatiniai spaustuvai 2 vnt.

Sąlyga: labai geros būklės (naudotas), 21 spindles The spindle pitch is 32 mm Pedpfjtrlm Uox Ah Hopl 2.5 HP motor

Sąlyga: labai geros būklės (naudotas), WMW drilling machine S10 in very good condition. Podpjpbccasfx Ah Hopl

Sąlyga: labai geros būklės (naudotas), 0.37 kW motor Ppsdoh Im Ukepfx Ah Hol with a 7.5 cm stroke Very good condition.

Sąlyga: labai geros būklės (naudotas), Distance between the drills: 32 mm 2 x 1.5 kW motors Pjdpotrdltjfx Ah Hepl Pneumatic pressure Distance between the units: 72 cm 2 lower units 1 unit with 26 drills

Sąlyga: naudotas, Gamybos metai: 1980, Gręžimo velenų skaičius: 23 vnt. Žingsnis: 32 mm Grąžto tvirtinimas: įsukama srieginiu būdu Valdymas: kojiniu pedalu Gręžimo kryptis: iš viršaus ir iš galo Pasukimas: pneumatinis Maks. pralaidimo plotis: 720 mm Medžiagos spaustuvų skaičius: 2 vnt. Medžiagos spaudimo tipas: pneumatinis Konstrukcija: mobilus Kamštelių sistema: eilėms su skylėmis ir konstrukcinėms eilėms Matmenys: 1300 x 1200 x 1700 mm Svoris apie: 365 kg Variklio galia: 2,2 kW Sandėliavimo vieta: Nattheim Pedpfswkir Djx Ah Hjpl

Sąlyga: naudotas, Gamybos metai: 2002, Gręžimo galia 25 mm, griebtuvo tvirtinimas MK 3 Sandėliavimo vieta: Nattheim Podpjvvi Auofx Ah Hepl

Sąlyga: naudotas, Gamybos metai: 2000, Stalo dydis: 580 x 280 mm; gręžimo stalo aukštis: 800 mm; gręžimo gylis: 150 mm; gręžimo ilgis: 225 mm; aukščio reguliavimas: 180 mm; pasukimo diapazonas: 2x 45°; grąžto sūkių skaičius: 2800 aps./min.; Wescute griebtuvas: 0–20 mm; ištraukimo jungties skersmuo: 80 mm; variklio galia: 2,2 kW / 3 AG; užimama vieta: 850 x 1000 x 1050 mm; svoris: apie 240 kg. Sandėliavimo vieta: Nattheim. Ppsdoxya H Iopfx Ah Hsl

Gamybos metai: 1987, Sąlyga: geras (naudotas), max. drilling and milling diameter: 20 mm maximum drilling depth: 180 mm maximum drilling length: 180 mm table surface dimensions (L/W): 280 / 600 mm maximum distance from table surface to spindle axis: 130 mm spindle speed: 2,800 rpm Ppodpfxeiduhzj Ah Hjl motor power: 2.2 kW air requirement for chip extraction unit: 300–350 m³/h air velocity in extraction system: 19–22 m/s connection diameter of extraction nozzle: 80 mm dimensions (L/W/H): 1,240 / 800 / 1,350 mm weight: 350 kg

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), - 0.8 kW motor - 400 V power supply - 3 spindles - drilling depth adjustment - pneumatic spindle stroke - integrated air blower at the drilling location - two pneumatic workpiece clamps Ppsdpfx Ajidmu Rjh Hol

Sąlyga: naudotas, Gamybos metai: 1998, - Gamybos metai: 1998 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas mainams visada galimi visoms pramoninėms prekėms. Yorick Diebels Ppjdeych I Tspfx Ah Hjl

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1998, mašinos/transporto priemonės numeris: M000039046, gręžimo gylis: 180 mm, aukščio reguliavimo tipas: mechaninis, stalo plotis: 315 mm, stalo ilgis: 565 mm, grąžto griebtuvo dydis: 20 mm, bendras svoris: 260 kg, sukimosi greitis (maks.): 2 840 aps./min, galia: 1,5 kW (2,04 AG), darbinio aukščio: 850 mm, MAKA LB-1 Mortising Machine Ppjdpfoyc Rz Aox Ah Hsl Robust, heavy-duty cast work tables and supports, combined with a large machine base, ensure perfectly smooth operation. The height and depth adjustments are monitored via graduated scales, and the extremely easy one-lever adjustment via ball guides enables fatigue-free operation. Technical specifications: Table size: 565x315 mm Working table height: 850 mm Longitudinal travel of drill head: 240 mm Max. drilling depth: 180 mm Vertical adjustment drill head: 140/160 mm Two-jaw drill chuck: 0–20 mm Speed: 2,850 rpm Motor power: 1.5 kW Extraction port Ø: 90 mm Net weight: 60 kg Sound level according to DIN-45635/1600: 66.9 dB The machine is in perfect technical and optical condition and has been checked in our workshop. It is equipped with a dowel hole drilling device (16-22-25-32 mm) and a precision mitre fence (45°-0-45°). Shipping available at extra cost. We ship exclusively within the EU. No shipping outside the EU.

Sąlyga: naudotas, Gamybos metai: 2022, New display machine! List price: €14,200. 400V, 3Ph, 50Hz / 1.5 kW Fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot pedal for clamping–drilling–unclamping; - Electric automatic return of the drilling unit after reaching the set drilling depth; - Automatic drilling depth extension for face drilling saves readjustment between flat and face holes (+10 mm, e.g. for dowel length 35 mm, drilling depth flat surface 14 mm, drilling depth face side 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0–70 mm). - Includes 21 quick-change chucks (Ganner system) for easy bit replacement. - Drilling unit swivels from 0° to 90°, assisted by gas cylinder. - 1 clamping carrier movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece heights up to max. 80 mm. - Complete stop system consisting of: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 position stops and quick-change system, easily switchable from right to left for mirrored shelf drilling in cabinet construction; also suitable for line drilling in the 32 mm system. - Stops and position settings as well as drilling height adjustment via support table with mechanical digital display. Stops can be swung out for quick conversion from cabinet to frame and vice versa. - Arms for clamping carrier made for line drilling up to max. 300 mm position. Ideal three-stage tooling system. - 1 set of dowel drills: 5 carbide dowel drills, Ø 8x77 mm, right; 4 carbide dowel drills, Ø 8x77 mm, left. Additional equipment: - Extraction funnel, dust-tested, Ø 120 mm. - Complete set for line drilling in the 32 mm system with: - 2 guides with scale and adapter for positions up to max. 300 mm, - 2 pairs of position cams for row drilling at Y-position 37 mm and e.g. 300 mm, Ppedpjqw Ek Ijfx Ah Hel - 1 base rail 1000 mm (aluminum profile 40x40 mm), - 1 setting gauge for line drilling. - 1 set of drills: - 11 carbide line drills, Ø 5x57 mm, right; - 10 carbide line drills, Ø 5x57 mm, left. - Hydraulic brake cylinder. - Additional clamping cylinder with bracket. Location:

Sąlyga: naudotas, Speed / rpm Reach / mm Psdpoithz Uofx Ah Hepl Motor power / kW More information will follow shortly.

Gamybos metai: 1995, Sąlyga: dilaminuotas dirbtuvėje (naudotas), multispindle drilling machine Koch 25 with automatic spindle 32 mm spindle pitch adjustment in X and Y axes as well as via ruler. The machine has been refurbished. Pedokytcfspfx Ah Hopl Machine type: SPRINT Motor: 4 kW Cylinder stroke: 300 mm year of manufacture: 1995 complete, ready-to-use machine 25-spindle drilling head, 32 mm pitch

Sąlyga: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication Ppodsxwaz Hepfx Ah Hjl - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K