Frezavimo staklės – universalios, konvencinės, X eiga 400–499 mm pirkti naudotą (73)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Table size: 1,100 x 600 mm Table load capacity: 450 kg Spindle speed range: 6,500 rpm Spindle taper: SK 40 Tool changer: 24 stations Control: Siemens 840 D Total power requirement: 20 kW Dodpfx Ajtdfbmedmocr Machine weight: 5,500 kg Space required (W x D x H): 2.3 x 3.1 x 2.3 m Condition: very good

Sąlyga: labai geros būklės (naudotas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivelling Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Dcodolnfggopfx Admjr Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling spindle drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed drive Feeds in all 3 axes: steplessly adjustable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X-axis): automatic: 400 mm Cross travel of the clamping table (Y-axis): automatic: 400 mm Vertical travel of the clamping table (Z-axis): automatic: 385 mm We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, special paint finish in Light Grey, CE compliant! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed angle table (newly scraped) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on spindle carrier >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extension: 90 mm >> Drawbar system: M16 Dcodpfx Asxctyaodmor >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication system About the Machine: Offered is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all axes move smoothly and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes, all bellows have been replaced. The fixed angle table has been newly scraped. This is a reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout facilitates and further increases the precision of milling tasks. Take the opportunity to inspect and test the machine under power at our facility.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, x-axis travel: 400 mm y-axis travel: 320 mm z-axis travel: 400 mm Control: HEIDENHAIN TNC 410 Spindle speeds — stepless: 0 - 4000 rpm Quill stroke: 60 mm Tool holder: SK 40 Table clamping surface: 650 x 350 mm Total power requirement: 6.5 kW Dcedpfx Aeunt Ihjdmjr Machine weight approx.: 1.8 t Required space approx.: 2.5 x 1.8 x 2.0 m Electronic handwheel: HR 410 Touch probe: MP 11, automatic tool measurement: TT 120 Enclosure, tool holders, ...

Sąlyga: naudotas, Gamybos metai: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm Tool holder SK 40 Spindle speed 1.0 - 4,000 rpm Feed rates 0 - 2,000 mm/min Quill stroke 60.0 mm Table size 650 x 350 mm T-slots 14 H7 Control unit TNC 124 Motor power 5.5 kW Weight 1,800 kg Required space approx. 2,000 x 1,000 x 2,100 mm Original price ~ €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swiveling control panel, positioned to the right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed: 0 - 2,000 mm/min - Y-axis feed: 0 - 2,000 mm/min - Z-axis feed: 0 - 2,000 mm/min - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual for machine and control unit Special accessories included: - Hydraulic machine vice - Numerous tool holders - Electronic handwheel HEIDENHAIN HR 410 Dcsdpfsw U U Sijx Admsr

Sąlyga: geras (naudotas), Gamybos metai: 1981, Freza Kunzmann UF 6 N, stalas 860 x 240 mm, įrankio tvirtinimas SK 30, su skaitmeniniu ekranu, apsukos 30-1275 aps./min. Dodpfx Aexavbhedmjcr

Sąlyga: geras (naudotas), x-travel 300 mm y-travel 340 mm Dsdsucphxepfx Admscr z-travel 250 mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Heidenhain 3-axis active digital readout Year of manufacture unknown

Sąlyga: geras (naudotas), Gamybos metai: 1980, For sale: 1 unit milling machine Manufacturer: Kunzmann Dcedeq Rfqbepfx Admer Model: HF6/2V Year of manufacture: 1980 Speeds: see nameplate Table size: 700 x 170 mm The machine can be inspected at our warehouse in 09599 Freiberg.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF 410MA with Heidenhain 3-Axis Active Digital Readout - As New Condition, CE Compliant! Technical Data: - Year of manufacture: 2014, Machine No. 410624 - Milling table clamping surface: 600 x 375 mm - Clamping slots: 5 - Slot width: 14 H 7 - Maximum load: 250 kg - Spindle speed range: 1-4500 rpm - Feed rate up to 5 m/min - Travel X/Y/Z: 410/350/450 mm - Vertical and horizontal quill - SK40 - Hydraulic drawbar system - Weight: approx. 1,800 kg - Dimensions (approx.): 2 x 2 x 2 m - Main drive motor (100%/25% ED): 8.5 / 16.2 kW Accessories & Features: - Heidenhain 3-axis active digital readout - Hydraulic clamping, vertical and horizontal - Automatic central lubrication Dcjdsw Swb Ijpfx Admor - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the machine: Offered here is a Kunzmann WF 410MA tool milling machine equipped with a Heidenhain 3-axis active digital readout. The machine demonstrates its capabilities daily in the workshop, production, and training environments. This universal milling machine is in like-new condition. It is further equipped with hydraulic clamping, both vertical and horizontal. Switching from vertical to horizontal operation is very easy thanks to the swiveling vertical head. The guides are lubricated regularly via the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power on site.

Gamybos metai: 1991, Sąlyga: geras (naudotas), Hermle UWF 802 M tool milling machine with Hermle HS path control. The machine is in good, operational condition and can be demonstrated under power. Djdpfx Adedubmksmscr

Sąlyga: geras (naudotas), Gamybos metai: 1991, mašinos/transporto priemonės numeris: 20645, Offer 24309 Technical Data: - Table size: 710 x 315 mm Dcsdpjt Tad Hefx Admer - Axis working range - X (longitudinal) mech./manual: 400 / 420 mm - Z (vertical): 350 / 370 mm - Y: 220 / 228 mm - Distance spindle to table surface: 50 – 465 mm - Tool holder: ISO 40 - Spindle speeds, horizontal, adjustable in 16 steps: 56 – 1800 rpm - Spindle speeds, vertical, adjustable in 16 steps: 56 – 1800 rpm - 16 feed rates: 11 – 355 mm/min - FAGOR digital readout - Drive: 400 V / 2.2 kW - Required space approx.: W 1600 x H 1900 x D 1600 mm - Weight approx.: 1300 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 2 100 mm, bendras plotis: 2 100 mm, bendras ilgis: 2 300 mm, stalo plotis: 450 mm, stalo ilgis: 750 mm, sukimosi greitis (maks.): 4 500 aps./min, sukimosi greitis (min.): 1 aps./min, bendras svoris: 1 900 kg, ruošinio svoris (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, speeds 1 - 4500 rpm, motor 4.5 kW, spindle SK 40, Heidenhain TNC 320 control, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Dcjdewb Erzspfx Admer

Sąlyga: naudotas, Model-making milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine -Milling head: tiltable/rotatable -Feed: No power feed in X and Y axes as no motors are installed (gear mechanisms are present, see pictures) -Worktable: 280 x 1300 mm -Traverse path (X/Y/Z): 450/300/325 mm Dcodpfx Aded Dt R Hjmor -Spindle taper: SK40 -Quill stroke -Quill feed: 0.04–0.16 mm/rev -Speeds: 60 to 3000 rpm -Dimensions: 1700/1530/H2200 mm -Weight: 1362 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Universal Tool Milling Machine Brand: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 344025 with warranty Dedsm Nbwtopfx Admocr Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system for detecting workpiece position for determining workpiece reference points for measuring finished parts incl. Weldon collet chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) tiltable on 3 axes rotatable 360° (displayed as the 4th axis digitally in the control) swivels +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering bore Ø 32 mm table load 150 kg - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant device - Splash guard enclosure, movable, electrically secured - Operating manual Used, sold as seen Technically the machine complies with the standard of its year of manufacture.

Sąlyga: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF7/3 CNC with Heidenhain TNC 124 Control – Excellent Condition! Technical Specifications: - Year of manufacture: 1996, Machine no. 370173 - Fixed angle table - Infinitely variable spindle speed up to 3700 rpm - Infinitely variable feed in 3 axes from 0 to 1000 mm/min - Travel X/Y/Z: 600/400/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load capacity: 300 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – ISO 40 - Hydraulic tool clamping system - Weight: approx. 1800 kg - Space required: approx. 2.3 x 2 x 2 m - Main drive motor: 4 kW - Total power requirement: approx. 7 kVA Equipment and Accessories: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication system - Spindle brake - Technical documentation, spare parts diagrams, control operation manual and programming examples - Full safety enclosure Dedpfsw Rx Tisx Admocr - Coolant system - Electronic handwheel About the Machine: Offered here is a Kunzmann WF7/3 CNC tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from the training workshop of an automobile manufacturer where it saw only limited use. The control is very easy to operate. Furthermore, the machine features hydraulic clamping on both vertical and horizontal axes. Switching from vertical to horizontal operation is very straightforward due to the tilting vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our facility.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully functional and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Rigid angle table, clamping surface: 650 x 350 mm Maximum load: 250 kg Main drive AC motor: 5.5 kW Feed drives: separate AC drives Infinitely variable feed rate: 0–2,000 mm/min Tool holder: SK 40 Speed range: 1–4,000 rpm Quill, vertical: stroke 60 mm Swivel range vertical milling head: ±90° Tool clamping: hydraulic Direct, distance-encoded linear measurement systems resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Transport and loading can be organized Europe-wide on request, subject to an additional charge. Prices are plus VAT. Djdpfx Aevftrxodmscr Inspection possible by appointment. Please contact us, our team will be happy to assist you! Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 19636, Offer 24103 Technical Specifications: Dcsdpfx Aetwmclsdmer - Axis working range - X / Y / Z: 450 / 400 / 420 mm - Table size: 850 x 250 mm - Maximum distance spindle – table: 400 mm - Spindle speeds, horizontal: 30 – 1275 rpm - Spindle speeds, vertical: 66 – 2840 rpm - Feed rates X – Y and Z axis - Rapid traverse - Drive: 400 V / 3.2 kW - Required floor space (approx.): W 1400 x H 1800 x D 1400 mm - Weight (approx.): 1400 kg

Sąlyga: reikia remonto (naudotas), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table: 630 x 350 mm Clamping surface: 700 x 300 mm Spindle speed range: 45 to 2,240 rpm Spindle mount: SK 40 Doded Hl Stopfx Admecr Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Eiga X ašyje: 500 mm Dcodpfx Asw I A D Todmjr Eiga Y ašyje: 400 mm Eiga Z ašyje: 400 mm Sūkių diapazonas: 50 – 2500 aps./min Pavaros galia: 2,7 / 4,4 kW Įrankio laikiklis: SK 40 su hidrauliniu spaustuvu pagal DIN 2080 Stalo tipas: Fiksuotas arba pasukamas stalas Stalo tvirtinimo paviršius: 650 x 380 mm Svoris: 1600 kg Matmenys (su saugos zona): apytiksl. 2500 x 2700 x 1950 mm Dažymas: RAL 6011 reseda žalia Skaitmeninis indikatorius: 3 ašių HEIDENHAIN Priedai: Centrinis tepimas, KSS vonelė, papildoma įranga pagal užklausą

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2011, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 – partially overhauled, newly painted RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 410016 with warranty Geometry acceptance test including inspection protocol Accessories: - HEIDENHAIN TNC 320 CNC control - HEIDENHAIN HR 410 electronic handwheel - Preparation kit for probe TS 220 with tool holder on the control panel and spindle lock - Fixed table 650 x 375 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant system - Enclosed splash guard cabin, movable, electrically interlocked - Left side window of splash guard cabin removable, electrically interlocked - Control panel mounted on machine base - Operating manual Used, as seen Dodpfovdrx Uex Admocr The machine conforms to the technical standard of its year of manufacture.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Finish, CE Compliant! Technical Data: - Year of manufacture: 1984 | Machine No.: 2203-1429 - Fixed angle table (newly planed) - Spindle speed: 50 – 2,500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1,300 mm/min - Travel (X/Y/Z): 500 / 400 / 400 mm - Vertical milling head on spindle support, adjustable by 150 mm - Vertical and horizontal quill – SK40 taper - Vertical quill extendable by 90 mm - Drawbar system: M16 - Weight: approx. 1,500 kg Accessories & Equipment: - 3-axis Heidenhain digital readout - Coolant system Dodpfx Adsw N Sfvjmscr - Chip tray - Central lubrication About the Machine: For sale is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, with minimal play in the handwheels and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine operates quietly. Rapid traverse is available in all axes, and all bellows are as new. The fixed angle table has been newly planed. This is a reliable and user-friendly machine. The oil has been changed and both mechanical and electrical systems have been checked. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power on site.

Sąlyga: geras (naudotas), Gamybos metai: 1985, mašinos/transporto priemonės numeris: 1076-85, Offer 24303 Technical Data: - Table size approx. 630 x 340 mm - Travel range of the axes - X (longitudinal) approx. 400 mm - Y (cross) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance spindle–table surface: 400 mm - Tool holder: SK 40 - Spindle speeds adjustable in 16 steps: 45 – 2240 rpm - Power feeds X / Y / Z axis: 6.3 – 1250 mm/min - Drive: 400 V / 8.5 kW - Required space approx.: W 1450 x H 1900 x D 1450 mm - Weight approx.: 1600 kg - Equipped with: - 3-axis digital readout HEIDENHAIN Dcjdpjt Dxwgefx Admer - Swivelling vertical milling head - Horizontal spindle counter-support - Machine vice

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Universal milling machine Make: KUNZMANN Model: WF 4/3 Djdpfshikrrex Admjcr Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as seen -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Very Good CONDITION, CE Compliant! Dsdpfxewzu Ske Admecr Technical Data: >> Year of Manufacture: 2000, Machine No. 343030 >> Fixed Angle Table >> Infinitely variable spindle speed up to 4,000 rpm >> Stepless feed in 3 axes from 0 to 2,000 mm/min >> Travel X/Y/Z: 400/320/400 mm >> Table size: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal spindle – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Motor power: 13 KVA Accessories & Equipment: >> Heidenhain TNC 124 Control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples >> Handwheels >> Coolant unit About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good condition, coming from a facility where it was only lightly used for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal milling is straightforward by simply swiveling away the vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our facility. We invite you to view and test the Kunzmann under power on site.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1999, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 343006 with warranty Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 point-to-point control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system ISO 7388 - Central lubrication, electric - Coolant unit - Splash guard cabin, electrically secured - Operator panel on machine base Dodpfxeub R R Se Admjcr - Operating manual Used, as seen Technically, the machine corresponds to the standard of its year of manufacture.