Frezavimo staklės – universalios, konvencinės, X eiga 400–499 mm pirkti naudotą (75)

Būklė: naudotas, Gamybos metai: 1995, - Heidenhain digital position display - Infinitely variable feed in all axes - Rapid traverse in all axes - Hydraulic clamping system - Fixed angle table - Electric central lubrication - Coolant system - Workplace lighting - Machine leveling feet - Year of manufacture: 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - T-slots: 5 - Slot width: 14 H7 - Slot spacing: 63 mm - Max. load: 250 kg Working area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Table top to horizontal spindle center: 140 - 540 mm - Table top to bottom edge of vertical head, max.: 430 mm Milling spindle: - Tool holder: SK40 - Spindle speeds vertical/horizontal: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head swivels both sides: 90° Feeds: - Longitudinal & cross feed: 0 - 1000 mm/min - Rapid traverse longitudinal & cross: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg Knedpfxjvhfqrs Am Reb

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, x-axis travel: 400 mm y-axis travel: 320 mm z-axis travel: 400 mm Kodpfx Amsunt Ihj Renb Control: HEIDENHAIN TNC 410 Spindle speeds — stepless: 0 - 4000 rpm Quill stroke: 60 mm Tool holder: SK 40 Table clamping surface: 650 x 350 mm Total power requirement: 6.5 kW Machine weight approx.: 1.8 t Required space approx.: 2.5 x 1.8 x 2.0 m Electronic handwheel: HR 410 Touch probe: MP 11, automatic tool measurement: TT 120 Enclosure, tool holders, ...

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X-axis travel: 650 mm Kjdpfx Ajtdfbmom Rjnb Y-axis travel: 500 mm Z-axis travel: 450 mm Table size: 1,100 x 600 mm Table load capacity: 450 kg Spindle speed range: 6,500 rpm Spindle taper: SK 40 Tool changer: 24 stations Control: Siemens 840 D Total power requirement: 20 kW Machine weight: 5,500 kg Space required (W x D x H): 2.3 x 3.1 x 2.3 m Condition: very good

Būklė: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully functional and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Rigid angle table, clamping surface: 650 x 350 mm Maximum load: 250 kg Main drive AC motor: 5.5 kW Feed drives: separate AC drives Kjdpfovftrxox Am Renb Infinitely variable feed rate: 0–2,000 mm/min Tool holder: SK 40 Speed range: 1–4,000 rpm Quill, vertical: stroke 60 mm Swivel range vertical milling head: ±90° Tool clamping: hydraulic Direct, distance-encoded linear measurement systems resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Transport and loading can be organized Europe-wide on request, subject to an additional charge. Prices are plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you! Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Būklė: naudotas, Parduodama naudota Aciera F4 precizinė frezavimo staklė iš Šveicarijos. Naujausia karta. Puikios būklės. Judėjimo diapazonai: X400 Y175 Z450 mm Įrankio laikiklis: Iso 40 Veleno apsukos: 50–3400 apm bepakopės Universalus frezavimo stalas Pateikimai X ir Z ašyse: 10–600 mm/min bepakopės Greitasis paleidimas X ir Z ašyse: 1500 mm/min Ypač stabili ir tiksli įrankinė frezavimo staklė. Komplekte keletas SK40 įrankių ir spaustuvė su spaustuvėlių komplektu. Originali naudotojo instrukcija pridedama Svoris apie 950 kg Knedpfoy H Iupox Am Rjb

Gamybos metai: 1968, būklė: naudotas, Deckel milling machine FP1 with 3-axis digital readout 380V Machine no. 37729 120-1900 rpm Travel path X-axis: 300 mm Travel path Y-axis: 150 mm Travel path Z-axis: 340 mm Tool holder: MK 4 with draw thread S 20 x 2 Milling head type: Vertical milling head Table type: Fixed table Clamping surface: 600 x 210 mm T-slot size: 12 mm Feed X-axis: 290 mm Feed Y-axis: 150 mm Knjdjpmrpxopfx Am Reb Feed Z-axis: 330 mm Weight: 700 kg Deckel milling machine FP1 ID: M100000409

Būklė: labai geros būklės (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout Heidenhain and Stepless Feed – Excellent Original Condition Technical Data: >> Year of manufacture: 1982 Machine No.: 2201-5527 >> Swivel-tilt rotary table >> Speed range: 25 - 2500 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head adjustable on spindle carrier by 200mm >> Extendable vertical and horizontal quills – SK40 taper Knjdpfx Asy Eqkzem Rob >> Drawbar system M16 >> Weight approx. 1,500 kg Accessories and Equipment: >> 3-Axis Active Digital Readout Heidenhain TNC113 >> Coolant system >> Central lubrication About the machine: Offered here is a Deckel FP3 universal milling machine in excellent original condition. The machine has minimal backlash and all spindles move smoothly. In this newer FP3 model, the feed can be regulated steplessly in all three axes, and the machine features a rapid traverse on each axis. A significant advantage is the active 3-axis digital readout. With the Heidenhain distance control, you can enter dimensions and the machine will move automatically to the set positions. An oil change has been performed. Mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Būklė: geras (naudotas), Hispano Suiza Geneve milling machine offered. X-axis travel: 410 mm Y-axis travel: 200 mm Z-axis travel: 400 mm Speed range: 67 – 3000 rpm Spindle taper: ISO 40 Knedpfef Srhgsx Am Rob Table size: 430 x 225 mm Swivel head Dimensions: 130 x 130 x 140 cm (L x W x H) For more information, please call us or send an email.

Būklė: geras (naudotas), FR Korradi milling machine Type: UW1 X travel: 460 mm Y travel: 260 mm Kjdpfoq Eh H Ujx Am Rjnb Z travel: 320 mm Max. spindle speed: 1740 rpm Spindle: ISO 40 Table size: 345 x 800 mm Dimensions: 130 x 110 x 170 cm (LxWxH)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1986, Dear Sir or Madam, We hereby offer you well-maintained milling machines of the Deckel FP4M type. Each machine is at least technically inspected in our workshop and is therefore fully operational. We look forward to your inquiry! Delivery time: on request Machine no.: xxxx-xxxx Year of manufacture: xxxx Table type: fixed Spindle speed: 50 – 2500 rpm Feed rate: 8 – 630 mm/min Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Knodpfx Aelrw Tiom Rsb Rapid traverse: 1300 mm/min Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: M16 Vertical quill stroke: 90 mm Weight: approx. 1.6 t Additional equipment and accessories: on request Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - You are free to choose the paint color of your selected machine - On request, you can order additional accessories such as tools directly - If required, we can also install further accessories such as safety devices, etc. - We are happy to handle shipping and/or installation for you

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Active Heidenhain Digital Readout Complete Overhaul by FPS in 2015, Like-New Condition Technical Data: - Year of manufacture: 1980, Machine No. 2201-5045 - Fixed angle table - Spindle speed: 25 – 2500 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 2.0 / 4.0 kW Knjdpfsu Dm E Hsx Am Rob - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head can be moved 200 mm along the column - Vertical and horizontal quill – SK40 extendable - Clamping system M16 - Weight: approx. 1500 kg Accessories and Equipment: - 3-Axis Active Digital Readout Heidenhain (latest version) - Coolant system - Central lubrication About the Machine: Offered is a Universal Milling Machine Deckel FP3 in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has only seen limited use since. The machine has minimal backlash and all spindle movements operate smoothly. On this later FP3 model, the feed is steplessly adjustable in all three axes, and each axis also features a rapid traverse. A significant advantage is the Active 3-Axis Digital Readout. With the Heidenhain path control, you can input measurements that the machine automatically approaches. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout significantly simplifies and boosts the precision of work. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE Compliant! Technical Data: Ksdpfx Amov Dut Io Rsnb - Year of manufacture: 2008 - Machine No.: 348084 - Fixed angle table - Speed: infinitely variable up to 4,500 rpm - Feed rate: stepless in 3 axes from 0 to 2,000 mm/min - Rapid traverse: - X and Y axis: 5,000 mm/min - Z axis: 4,000 mm/min - Travel X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Both vertical and horizontal spindle with SK40 taper - Hydraulic clamping system - Approximate weight: 1,800 kg - Required space (LxWxH): approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual for the control, and programming samples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition. It comes from a facility where it was only used infrequently for training purposes. The control system is very user-friendly. In addition, the machine features hydraulic clamping for both vertical and horizontal operations. Changing from vertical to horizontal is very simple thanks to the pivoting vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann on site under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain Digital Readout, Year of Manufacture 1994, Excellent Condition!! Technical Data: >> Year of manufacture: 1994 Kodpfx Amsvyr R Ne Rjnb >> Fixed angle table >> Spindle speeds from 40 to 2550 rpm >> Infinitely variable feed rate in X, Y, Z axes from 0 to 2000 mm/min >> Travel paths X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Quill stroke (vertical): 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the Machine: Offered is a Kunzmann WF4/3 universal milling machine in very good condition. It comes from a government facility where it was only lightly used. Conversion from vertical to horizontal operation is very simple, thanks to the folding vertical head. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our premises.

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF 410M with Heidenhain TNC 128 Control, LIKE NEW, CE Compliant!! Technical Data: >> Year of manufacture: 2022 Machine No. 411555 >> Clamping surface of milling table: 650 x 375 mm T-slots: 5 T-slot width: 14 H7 T-slot spacing: 63 mm Maximum load: 250 kg >> Spindle speed range: 1–4500 rpm >> Feedrate X, Y, Z axes (stepless): max. 5/5/4 m/min Kjdpfx Amov Rppks Rsnb >> Travel X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill - SK40 >> Hydraulic drawbar system >> Approx. weight: 2000 kg >> Approx. dimensions: 2 x 2 x 2 m >> Connected load: 13 kVA Equipment and Accessories: >> Heidenhain TNC 128 control >> Heidenhain HR 510FS electronic handwheel >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions >> Machine lamp >> Minimum quantity lubrication >> Counterstay >> Digital display for quill travel >> Oriented spindle stop (thread cutting without compensating chuck) >> Chip guard enclosure >> Edge finder KT 130 >> Coolant system >> Rotary table 200 mm >> Indexing device with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the Machine: For sale is a tool milling machine Kunzmann WF 410M, year of manufacture 2022, LIKE NEW, equipped with a Heidenhain TNC 128 control. The TNC 128 offers numerous user-guided cycles with graphic simulation for quick and simple data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole rows, rectangular pockets, rectangular bosses, and surface milling. The control unit is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the tiltable vertical head. The guides are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Kunzmann under power at our location.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg Knsdpfx Ajxupc Uem Rjb >> Vertical quill travel: 60 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Power requirement: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 contour control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 contour control. This machine is in excellent condition with very low operating hours and was only used for training purposes. It features very user-friendly controls. The machine also offers hydraulic clamping in both vertical and horizontal orientations. Changing from vertical to horizontal mode is quick and simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the automatic central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to view and test the machine under power at our premises. There are 7 units of the Kunzmann WF4/3 with TNC 320 Heidenhain control available. The machines are ready for immediate delivery.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, special paint finish in Light Grey, CE compliant! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 Kjdpfjxctyasx Am Rsnb >> Fixed angle table (newly scraped) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on spindle carrier >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extension: 90 mm >> Drawbar system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication system About the Machine: Offered is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all axes move smoothly and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes, all bellows have been replaced. The fixed angle table has been newly scraped. This is a reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout facilitates and further increases the precision of milling tasks. Take the opportunity to inspect and test the machine under power at our facility.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Very Good Condition, CE Certified! Technical Specifications: >> Year of Manufacture: 2006, Machine No. 348013 >> Fixed angular table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm Kedpewrhxfofx Am Rsnb >> Vertical and horizontal quill – SK40 taper >> Hydraulic tool clamping system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. Moreover, the machine features hydraulic clamping both vertically and horizontally. Switching between vertical and horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location.

Gamybos metai: 1991, būklė: geras (naudotas), Hermle UWF 802 M tool milling machine with Hermle HS path control. The machine is in good, operational condition and can be demonstrated under power. Ksdpfedubmkox Am Ronb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control, Year 2014, Excellent Condition CE compliant!! Technical data: - Year of manufacture: 2014 - Fixed angle table - Speed: stepless up to 4000 rpm Kjdpfx Amsy Sihze Rsnb - Feed stepless in 3 axes from 0 to 2000 mm/min - Travels X/Y/Z: 600/400/400 mm - Rapid traverse x/y/z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load: 250 kg - Quill stroke, vertical: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1700 kg - Space required approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels, coolant system, tool holders, vise About the machine: Offered is a Kunzmann WF 600 M tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in excellent original condition. It comes from a facility where it was only occasionally used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple thanks to the swiveling vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. Take the opportunity to inspect and test the Kunzmann on site under power. You will find further milling machines from renowned manufacturers on our website.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 420 mm, Y ašies eiga: 220 mm, Z ašies eigos atstumas: 380 mm, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 65 aps./min, plunksnos brūkšnys: 100 mm, bendras aukštis: 1 800 mm, bendras plotis: 1 500 mm, bendras ilgis: 1 200 mm, stalo plotis: 390 mm, stalo ilgis: 840 mm, ruošinio svoris (maks.): 200 kg, atstumas nuo stalo iki veleno centro: 470 mm, Įranga: dokumentacija / vadovas, Stalviršio matmenys (kampinis stalas): 390 x 840 mm Maks. ruošinio svoris: 200 kg Judėjimo eiga X: 420 mm Judėjimo eiga Y: 220 mm Judėjimo eiga Z: 380 mm Pinolės eiga Z1: 100 mm Sūkių diapazonas: 65 - 2600 aps./min Pavaros pakopos: 12 Pavaros galia: 2,2 kW Įrankio kūgis: SK 40 (DIN 69871) Svoris apie: 1200 kg Į komplektą įeina platus standartinės įrangos asortimentas, pvz.: Darbinės zonos uždanga su priekinėmis durimis 3 ašių skaitmeninė indikacija Hidraulinis įrankių spaustuvas vertikaliai ašiai su SK-40 (DIN 69871) Dvigubai kontroliuojama verpstės apsauga 3 vnt. konvenciniai rankenėliai Visapusiška elektros įranga trifazei srovei 400 V, 50 Hz Kamuolinių sriegių poros X, Y ir Z ašims Vertikali frezavimo galva Fiksuotas kampinis stalas, tvirtinimo paviršius 840 x 390 mm Vertikalios frezavimo galvos pasukimo įtaisas Knodpfx Ameu Nytzo Rsb LED staklių šviestuvas Apsauginės gofruotos uždangos vertikaliems ir horizontaliems kreipiančių paviršiams Automatinė centrinė tepimo sistema ašims ir kamuolinių sriegių poroms Aušinimo skystis su siurbliu Laikymo elementų komplektas (4 vnt.)

Būklė: geras (naudotas), - 160/2500 aps./min - Stalas 915 × 225 mm - Automatinė pastūma X, Y ir Z ašyse - Greitusis eiga - Skaitmeninis 3 ašių ekranas Knodjy R Rcdepfx Am Rob - Gręžimo pinolis - 2 pakopų variklis - Frezavimo galvutė yra pasukama - Apšvietimas - 400V

Būklė: labai geros būklės (naudotas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivelling Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling spindle drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed drive Feeds in all 3 axes: steplessly adjustable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Knodslnfggepfx Am Rsb Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X-axis): automatic: 400 mm Cross travel of the clamping table (Y-axis): automatic: 400 mm Vertical travel of the clamping table (Z-axis): automatic: 385 mm We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Būklė: paruoštas naudoti (naudotas), Įrankių frezavimo staklės / DECKEL FP 2 su 3 ašių skaitmenine indikacija - Heidenhain ND 780 -Staklės prižiūrėtos, originalios būklės -Judėjimo ribos X/Y/Z: 450x230x400 mm -3 ašių Heidenhain skaitmeninė indikacija -Automatiniai padavimai / greitieji judesiai visomis trimis ašimis -Sūkiai: 40-2000 sūk./min -Universalus pasukamas ir pakreipiamas stalas -Horizontalaus / vertikalaus frezavimo įranga su slankiojančia galva -Įrankių laikiklis ISO 40 -Aukšto slėgio aušinimo sistema Knedsy R Emqopfx Am Reb -Įvairūs įrankių laikikliai ir tvirtinimo collet'ai -Dokumentacija Išmatavimai: I x P x A 1,5x1,7x1,8 m / Svoris 1600 kg Galimi netikslumai ar įvedimo klaidos.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, naudota CNC įrankių frezavimo staklė Pagaminimo metai: 2002 Valdymo gamintojas: Heidenhain Valdymo tipas: TNC 426 Darbo sritis: X: 400 mm Y: 350 mm Z: 400 mm Kodpfx Amsxz Rkye Renb Tvirtinimo stalas: 650 x 350 mm (standus stalas) Frezuotuvo veleno įrankių laikiklis: SK40 Apsukų diapazonas: 5 – 5000 aps./min Padavimo greitis: 0–2 m/min Įrankių keitiklis: nėra Priedai: standartiniai, drožlių surinkimo dėklas, rankinis ratukas ir dokumentacija su atitikties deklaracija ir duomenų atsarginės kopijos išsaugojimu

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Universalus įrankių frezavimo staklės WAGNER FCA 400 -Gamybos metai: 2008 -CE žymėjimas -3 ašių skaitmeninis indikatorius -Eigos X/Y/Z 450x400x400 mm Kedey Ddhmjpfx Am Rsnb -Stacionarus kampinis stalas 740x320 mm -Automatinės pastūmos visose trijose ašyse -Greitieji pastūmos režimai -Sukimosi greičio diapazonas 40-2000 aps./min. -Įrankio laikiklis ISO 40 -Vertikali / horizontali frezavimo sistema -Vertikali galva su gręžimo pinole -Saugos rankenėlės -Aukštos kokybės aušinimo sistema -Horizontalus atraminis guolis -Darbo apšvietimas -Staklių kojos Išmatavimai Ilg.xPlot.xAukšt. 1,4x1,2x1,9 metro / Svoris 1800 kg Galimi netikslumai ar įvedimo klaidos.