Universali frezavimo mašina

KUNZMANN UF 6 / 3

Būklė: geras (naudotas), Gamybos metai: 1972, LZ tekinimo staklės Gamintojas: HEIDENREICH & HERBECK, modelis: 21RO, pagamintos 1972 m. Su greito keitimo laikikliu Parat, 10 vnt., staklių dokumentacija, sriegių rodyklė, konuso centras, Forkardt 250 mm griebtuvas. Didžiausias tekinimo diametras virš lovio: 430 mm Didžiausias tekinimo diametras virš atramos: 255 mm Centro atstumas: 1000 mm Tekinimo ilgis: 750 mm Velieno apsisukimų skaičius: 19-2000 aps./min., 5,5 kW variklis Velieno anga: 56 mm Kiti duomenys žr. duomenų lape Užimamas plotas: ilgis 2900 mm, plotis 1100 mm, aukštis 1300 mm, svoris apie 1750 kg. Codet Ipi Iepfx Aahjpw Prieinami staklių dokumentai. Yra aušinimo įranga, drožlių atitvaras. Staklės geros būklės, galima parodyti su įjungta elektra.

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Cjdpofxyhfjfx Aahjpw Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand Codsthd Shjpfx Aahopw - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Būklė: labai geros būklės (naudotas), Knuth UFM 2 universalioji frezavimo staklė Techniniai duomenys X ašies eiga (rankinė) 800 mm X ašies eiga 750 mm Y ašies eiga 300 mm Z ašies eiga 400 mm Stalo dydis 1320x320 mm T formos grioveliai 5x14x63 mm Pavaros Y ašies eiga (8) 20 - 360 mm/min Z ašies eiga 600 mm/min Veleno apsukos (12) 58 - 1800 min-1 Vertikalaus veleno konusas SK 40 Atstumas tarp veleno galo ir stalo 0 - 400 mm Galvos pasukimas 45° Horizontalaus veleno konusas SK 50 Pavaros Pagrindinio variklio galia 4 kW Cjdpenfu Rijfx Aahspw Z ašies variklio galia 0,75 kW Pavaros variklio galia 0,55 kW Aušinimo siurblio variklis 0,09 kW Aušinimo skysčio siurblio našumas 25 l/min Matmenys ir svoris Matmenys 1900x1720x1750 mm Svoris 2100 kg Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina – pagal užklausą!

Būklė: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! Cpsdpfx Asf Sqckjahjw 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Fervi T047/400VDA pavaros reduktorinis gręžimo-frezavimo staklės, sriegiklis, 400V 1,5 kW. NAUJA GAMYBA, atitinka CE standartus. Akcijos kaina – galiojimas ribotas, kol yra sandėlyje. Įrenginys tinkamas šioms operacijoms: frezavimui, gręžimui, sriegimui. Gręžimo į ketaus maks. diametras su išankstiniu skylimu: ø 40 mm. Gręžimo į plieną maks. diametras su išankstiniu skylimu: ø 32 mm. Frezavimo su keičiamomis plokštelėmis galvute maks.: ø 80 mm. Frezavimo galimybė: ø 25 mm. Sriegimo galimybė: ø 22 mm. Kūginis tvirtinimas: CM 4. Griebtuvo eiga: 130 mm. Griebtuvo diametras: ø 76 mm. Kolonos diametras: ø 115 mm. Galvos pasvirimas: ±60°. Veleno greičiai (12): 75 ÷ 3200 aps./min. Trifazis variklis: 400 V, 50 Hz, 1,1–1,5 kW. Stalo matmenys: 585 x 190 mm. Lizdo plotis: 12 mm. Bazės matmenys: 648 x 412 mm. Bendri išmatavimai: 740 x 790 x 1960h mm. Svoris: 390 kg. Cjdpsg Npiwefx Aahopw

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm Cpsdpfx Aasirax Uehsw - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: naudotas, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus Cedpfx Ajh Hvk Aeahepw Mach. No. P30180/150 Year of manufacture: 1998 Centre distance 1250 mm Swing over bed 400 mm Centre height 200 mm Swing over cross slide 245 mm Max. turning diameter in gap 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock taper MK 5 Spindle bore 54 mm Spindle nose size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Level 1): 15-275 rpm Spindle speed range (Level 2): 35-795 rpm Spindle speed range (Level 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis max. 2000 mm/min. Rapid traverse Z-axis max. 4000 mm/min. Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power 7.5 kW Electrical connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC - Language in French (France) - Automatic 3-range gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various transmission ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolholder size B with 2 tool inserts - 1 live center - 1 quick-action drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged working area safety doors - Swarf tray with coolant device beneath the machine bed - Control cabinet fixed to the machine - RS 232 interface Required space (L x W x H) 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Cpedpfx Aecc D Ddsahow Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Būklė: naujas, Universalioji frezavimo staklė Gamintojas: OPTimill Modelis: MT 50 Prekės Nr.: 3336005 Būklė: Nauja staklė Cjdpfx Aaebnfxuohepw Eigos: - X ašis: 580 mm - Y ašis: 200 mm - Z ašis: 340 mm Standartiškai komplektuojama su: - 3 ašių skaitmenine indikacija DPA 31 PLUS - Automatinė X ašies pastūma - Ilgas frezos strypas 16 mm - Ilgas frezos strypas 22 mm - Gręžtuvo griebtuvo tvirtinimas B 18 - Dantytasis gręžtuvo griebtuvas 3–16 mm/B 18 - Redukcinis įvorė MK 2 su išstūmimo grioveliu - Redukcinis įvorė MK 3 su išstūmimo grioveliu - Mašinos šviestuvas - Aušinimo sistema - Eksploataciniai įrankiai - Naudojimo instrukcija