Būklė: naujas, ATEX version Geared radial fan Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Noise level: 78 dBA Folding side and rear wall (rear wall with extraction function) Work surface 2500 x 800 mm Ihjdpfxjh Ucqtj Ab Sew Working height 930 mm Including centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal airflow 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter 320 mm Filter cartridge length 600 mm Total filter area 34.8 m² Noise level: 78 dBA Compressed air: 5-7 bar Note on used machines: • Subject to errors in technical data and prior sale. • All prices are ex works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as-inspected without any warranty or guarantee. The buyer is free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Būklė: labai geros būklės (naudotas), Direct drive Airflow: 12,000 m³/h Negative pressure: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Outlet diameter: 400 mm Ijdpjh Tfqhofx Ab Sohw Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Used machinery notice: • Technical data subject to error and prior sale. • Quoted prices are ex works - loading included! • The machine has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to enquiries which include your address and telephone number!)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The most powerful stationary extractor on the market, equipped with a 2.8 kW motor, high negative pressure, and a capacity of 5,000 m³/h. It is ideal for use in both small and large carpentry workshops. The mobile base, fitted with wheels, ensures easy maneuverability. The metal impeller guarantees quiet and trouble-free operation of the extractor. The FM500 dust extractor is a highly efficient machine with strong negative pressure. Its robust metal construction and balanced impeller make it indispensable in any woodworking facility. The felt filter bags used in this extractor allow filtration of dust particles as small as five microns. The integrated manifold enables connection of up to four machines simultaneously, with maximum performance achieved when three machines are connected. Isdpfx Asvu Aqpeb Sshw Advantages of the FM500 extractor: - Balanced metal impeller - Quick-fit FELT dust collection bag - Mobile base on castors - Robust, all-metal construction - Bag support arms - High negative pressure - Powerful three-phase motor - Capability to connect up to four machines - Constant suction power Technical specifications: Motor power S1: 2.8 kW Power supply: 400 V / 50 Hz Motor speed: 2,950 rpm Overall dimensions: 1,525 x 560 x 2,460 mm Airflow capacity: 5,000 m³/h Negative pressure: up to 2,500 Pa Air intake speed: up to 31 m/s Filter bags: felt (2nd filtration stage) Waste bag volume: 480 L Nozzle diameter: 200 mm / 4 x (ø 100 mm) Weight: 64 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, mašinos/transporto priemonės numeris: 938 533, Funkcionalumas: visiškai funkcionalus, galia: 7,5 kW (10,20 AG), įėjimo įtampa: 400 V, įėjimo srovė: 14 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, tūrio srautas: 5 087 m³/val, siurbimo galia: 2 400 m³/val, įsiurbiamojo kolektoriaus skersmuo: 300 mm, filtravimo plotas: 31 m², triukšmo lygis: 81 dB, bendras aukštis: 2 400 mm, bendras ilgis: 2 400 mm, bendras plotis: 1 300 mm, bendras svoris: 620 kg, paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, Parduodama veikianti, nuolat prižiūrėta ištraukimo sistema. Dar galima apžiūrėti veikiančią, ardymas numatytas 17-ąją savaitę. Turimas vadovas su elektros schema ir priežiūros sąskaitomis. Ihodpfxsyt Eicj Ab Sow

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, FM300SN is an advanced industrial transport fan designed for the extraction of sawdust, wood chips, and wood dust in demanding factory conditions. With a power rating of 2.2 kW and an extraction capacity of 3900 m³/h, this unit serves as an efficient sawdust blower for dust extraction systems, providing effective filtration and air purification directly at the source of contamination. Reliability, high performance, and compatibility with various woodworking machinery make it an ideal choice for professional wood processing facilities. Key machine features - 2.2 kW motor – designed for continuous, intensive operation - High extraction performance of 3900 m³/h – effective removal of sawdust, chips, and dust - Impeller speed 2850 rpm – optimal airflow with stable operation - Universal suction nozzles – 1×150 mm and 3×100 mm for simultaneous connection of multiple machines - Steel construction – resistant to mechanical damage, suitable for industrial environments Design and technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibrations, and heavy use. The aluminum impeller, mounted directly on the motor shaft, provides high efficiency and minimal energy loss. The fan is configured for three-phase 400 V / 50 Hz operation, allowing stable use in industrial plants without the risk of system overload. The suction nozzle system, featuring diameters of 3×100 mm and 1×150 mm, allows for the simultaneous connection of several machines or the use of reducers depending on the requirements of the extraction system. Precision and work efficiency FM300SN stands out for its high efficiency in conveying sawdust and dust, even under heavy contamination. Optimized aerodynamic parameters ensure constant airflow, preventing clogs in the duct system. As a result, this dust extraction fan not only ensures a clean working environment but also extends the service life of connected machines by minimizing their exposure to process dust. Ihjdevu Amkspfx Ab Ssw Application The FM300SN model is suitable wherever efficient extraction systems for sawdust and chips are required during woodworking operations. It is especially recommended for: - Carpentry workshops - Furniture manufacturing plants - Production of panels and solid wood components - Central dust extraction systems in production halls Compatible with machines such as: - Planers and jointers - Thicknessers - Spindle moulders - Panel saws - Edge banders Standard equipment - Powder-coated steel housing - Three-phase 400 V motor - Direct drive aluminum impeller - Suction nozzles: 1×150 mm and 3×100 mm Optional equipment - Flexible hoses Ø100 mm, Ø120 mm, and Ø150 mm - Filter bags Technical data: Motor power: 2.2 kW Speed: 2950 rpm Extraction capacity: 3900 m³/h Suction nozzle diameter: 150 mm / 3x 100 mm Outlet nozzle diameter: 120 mm Voltage / frequency: 400 V / 50 Hz Dimensions (L x W x H): 440 x 430 x 450 mm Weight: 30 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, FM230 Extraction Unit - compact dimensions with high performance of up to 1000 m³/h. Standard features include a metal impeller and a mobile base. Excellent value for money, making it an uncompromising solution in its class. Years of development by our team have resulted in the creation of the multi-blade metal impeller series, WhirlWind, which together with a heavy-duty metal housing forms the heart of the extractor. The vacuum airflow efficiently collects excess sawdust generated during the machining of wood. The robust construction of the extractor is reinforced with additional brackets in the base, ensuring stable and vibration-free operation. The entire frame is strengthened with supports of appropriate thickness, which hold the dust cylinders and the weight of the waste bags securely on the heavy-duty base. An additional advantage is the use of a flexible and durable gasket at a critical point to enhance the overall tightness of the system. As standard, extractors are equipped with canvas bags (filter and waste) and additional heavy-duty disposable plastic waste bags. Flexible metal bands ensure years of trouble-free bag replacement. The inclusion of swivel and ball-bearing castors allows for easy movement of the extractor within the facility. Machine Features: A machine ideal for both professionals and hobbyist woodworkers. Optimal extraction performance makes it perfect for use with machines such as: - Planers - Jointers - Thicknessers - Milling Machines Technical Data: MOTOR POWER: 0.75 kW Iedpfx Aevu Az Usb Sshw EXTRACTION CAPACITY: 1000 m³/h BAG VOLUME: 60 l NUMBER OF BAGS: 2 INLET DIAMETER: 100 mm HEIGHT: 1500 mm WIDTH: 420 mm LENGTH: 600 mm VOLTAGE / FREQUENCY: 230 V WEIGHT: 27 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The FM 230N transport fan is a professional solution for local extraction of sawdust, wood chips, and dust generated during woodworking processes. Its compact design, robust motor, and high efficiency make this chip blower ideal as a component of dust extraction systems in carpentry shops, workshops, and with single- or multi-spindle machines. Key machine features - Effective chip extraction – with a capacity of 1,000 m³/h, it efficiently removes contaminants from the workspace - 0.75 kW motor – provides sufficient torque while maintaining low energy consumption - High impeller speed – 2,950 rpm ensures strong airflow - 100 mm suction nozzle diameter – allows easy connection to popular machines and installations - Low weight (14 kg) – enables easy transport and installation at various workstations Design and technology The FM 230N fan features a sealed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses from transmissions and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor operates at 230V and 50 Hz, enabling universal use in most workshops without the need for three-phase power installation. Precision and work efficiency The FM 230N fan is designed for high-efficiency air transport containing light wood fractions. With its optimized impeller and flow channel, the machine minimizes air resistance, allowing for continuous operation with large volumes of chips and sawdust. It serves both as a transport fan for chips and as a local chip blower supporting woodworking machines. Applications The FM 230N is used in carpentry workshops, furniture manufacturing plants, and production sites utilizing machines that generate dust. It can operate independently or as part of a larger dust extraction system. It is especially recommended as a sawdust extractor for: Iedpfjvu Ad Aex Ab Sehw - planers and jointers - thickness planers - spindle moulders - edge banders - circular saws Standard equipment - powder-coated steel housing - suction nozzle with a 100 mm diameter - stable mounting base - single-phase 230V motor Optional equipment - 100 mm diameter flexible hoses - dust collection bags Technical data: Motor power: 0.75 kW Speed: 2,950 rpm Extraction capacity: 1,000 m³/h Suction nozzle diameter: 100 mm Discharge nozzle diameter: 110 mm Voltage / frequency: 230 V / 50 Hz Dimensions (L x W x H): 430 x 400 x 340 mm Weight: 15 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The extractor is designed for handling very large amounts of contaminants. Its powerful motor, stable base, and quick bag mounting make this unit highly recommendable. This is a high-performance machine suitable for both small workshops and large carpentries. The CORMAK FM350 extractor, with its compact size and robust construction, is ideal for use in both small and large woodworking shops. Cooperation with woodworking machines: The device is adapted for efficient operation with various woodworking machines such as planers, thicknessers, milling machines, and band saws. Extraction performance: The new-generation metal impeller at 2,950 rpm enables effective extraction of chips and sawdust at a capacity of 4,860 m³/h. Construction: Reinforced, powder-coated steel frame guarantees solidness and durability, ensuring a long service life for the device. Bag replacement: Simple and fast bag replacement using steel clamps makes maintenance and upkeep easy. Adjustable feet: Threaded feet allow for adjustment on uneven surfaces, enhancing operational stability. Accessory kit: The set includes 3 filter bags, 3 waste bags, and a 4-way hose manifold, which increases the functionality of the extractor. Motor: Three-phase electric motor rated at 3.8 kW at 400V ensures reliability and efficient operation. Impeller: Steel impeller provides better performance and longer lifespan compared to plastic impellers. Connection to 4 machines: Additional manifold enables simultaneous connection to up to four machines, increasing operational flexibility. Large-capacity bags: The set includes 6 bags (3 filter and 3 waste), each with a capacity of 200 liters, allowing longer operation without frequent bag replacement. Standard equipment: 6 canvas bags Technical specifications: Extraction capacity [m³/h]: 4,860 Bag volume [liters]: 3 x 200 Number of bags: 6 Diameter of suction nozzle [mm]: 1 x 180, 4 x 100 Dimensions (L x W x H) [mm]: 2,355 x 590 x 2,150 Ihodpfx Abjvu Rx Io Sjw Weight [kg]: 125 Motor power [kW]: 3.8 Power supply: 3-phase, 400V Manual (DTR): Polish CE Declaration: Yes

Būklė: naujas, Gamybos metai: 2026, The manufacturer guarantees filtration quality. The certified control cabinet enables continuous monitoring of operational integrity. The 11 kW negative pressure fan (11,300 m³/h) functions on turbine principles, and its soundproofed housing significantly reduces noise emissions during operation. The entire extraction system is highly airtight, ensuring optimal indoor air quality and, during the heating season, preventing the loss of heated air. Advantages of DCV dust extraction systems: Ihodsudalwopfx Ab Ssw - Robust and sturdy construction, ensuring silent and vibration-free dust extraction operation - The new TC extraction series features a full top housing to absorb noise and vibrations generated during operation, as well as the option for warm air recirculation - Exceptional airtightness of the entire suction system, guaranteeing the best indoor air quality and no heat loss during the heating season - Powerful and quiet radial fan for high negative pressure performance - Ability to build a ceiling-mounted system to connect multiple machines operating simultaneously with DCV extraction - Reliable filter shaking system, capable of automatic cycle operation - Mobile chassis system for effortless relocation of extractors throughout the facility - Waste containers designed to maintain 99.99% system hermeticity, equipped with a mobile trolley system - Control cabinet for device on/off operations - Polyester filter retains dust particles down to 5 microns; for finer filtration (smaller particles), an additional filter such as HEPA is required - Use of this extractor is prohibited in explosive atmospheres - The extractor is not suitable for processing wet material (e.g., wet sawdust) - Before starting the extractor, the lower beam must be removed to allow easy access to the chip containers - Warm air recirculation kit available at extra charge Technical Specifications: - Power supply voltage: 400 V - Power rating: 11 kW - Motor speed: 3000 rpm - Filter material: Polyester - Filter dimensions: Φ160 x 960 mm - Number of filters: 64 units - Inlet diameter: 350 mm - Outlet diameter: 500 mm - Airflow: 11,300 m³/h - Dimensions (W x L x H): 1190 x 3160 x 2320 mm (excluding upper elbow) - Net weight: 710 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The extraction unit features high negative pressure and vibration-free operation. Thanks to its compact dimensions, it can be positioned under a panel saw table. All our extraction systems are easy to operate and allow for quick bag changes. The metal impeller ensures quiet and reliable, maintenance-free operation. The unit offers an excellent price-to-performance ratio. It is the perfect companion for saws, panel saws, planers, moulders, and similar woodworking machines. Machine description - For chips, sawdust, and dust from moulders, planers, saws, and more - High suction power Ijdpfx Aevuzt Njb Sshw - Easy to maneuver thanks to mobile chassis - Metal impeller and housing - Quick-release system for filter and bag Its compact design requires minimal workshop space while maintaining a high extraction capacity of 2200 m³/h! Technical specifications Extraction capacity: 2200 m³/h Bag diameter: 500 mm Inlet diameter: 125 mm Motor power: 2.2 kW / 400V Dimensions: 1160 x 605 x 750 mm Weight: 50 kg

Būklė: naujas, Gamybos metai: 2026, The most powerful centrifugal fan, the FAN5500, achieves an impressive capacity of up to 8,000 m³/h. The high negative pressure generated by the specially angled impeller blades and the powerful motor allow it to handle even the most demanding tasks. Owing to years of experience by the CORMAK team, the FAN series centrifugal fans were developed. The design of a new production line enabled us to create the LineWind metal turbine system. This is the key feature of our centrifugal fans; increased negative pressure efficiently extracts various types of contaminants thanks to the specially profiled blades set at an optimal angle. The centrifugal fan is designed for use in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Applications for centrifugal fans: - Transport of chips, sawdust, fine granulates - Dust-laden air extraction - Local extraction points - Drying systems Ihodsvughlspfx Ab Sew - Dehumidifiers Multi-blade metal impeller! High performance ensured by a dynamically balanced impeller. Thermal overload protection with integrated temperature sensor. The extraction system features additional anti-vibration feet in the base, guaranteeing stable and vibration-free operation. Emergency stop button compliant with standards PN-EN ISO 12100 and PN-EN ISO 13850. Another benefit is the use of branded, flexible, and durable seals in critical areas, allowing the achievement of high negative pressures with no leakage at connection points. Reliability confirmed by Polish users who enjoy working with our machines daily. Technical specifications: MAX. AIRFLOW CAPACITY: 8,000 m³/h INLET DIAMETER: 300 mm OUTLET DIAMETER: 250 mm MOTOR SPEED: 2,850 rpm DIMENSIONS: 670 x 600 x 600 mm MOTOR POWER / VOLTAGE: 5.5 kW / 400 V WEIGHT: 55 kg

Būklė: naujas, Gamybos metai: 2026, Radial fans enable operation with increased negative pressure power, allowing for the extraction of various types of contaminants thanks to a specially designed blade system, which has been profiled at the optimal angle. The radial fan has been designed specifically for use in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Thanks to the many years of experience of our CORMAK team, the FAN series of radial fans have been developed. The design of a new technological line enabled us to create the LineWind metal impeller system. This is the key feature of radial fans, allowing for highly efficient contaminant extraction with increased negative pressure, achieved by a specialized blade system profiled at the specified angle. The radial fan is purpose-built for use in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Radial fans are used for: - conveying chips, sawdust, and fine granulates - transporting dust-laden air - local exhaust systems - drying installations - dehumidifiers Multi-blade metal impeller! High performance is guaranteed by a dynamically balanced impeller. The thermal overload protection of the winding (thermal sensor) ensures safe operation. The extraction unit construction includes additional anti-vibration mounts at the base, guaranteeing stable and vibration-free operation. An emergency stop button, compliant with PN-EN ISO 12100 and PN-EN ISO 13850 standards, is included. An additional advantage is the use of high-quality, flexible, and durable gaskets at critical points, allowing for high negative pressure without loss at the joints. Reliability verified by Polish users who enjoy the daily operation of our machines. Ihodpovugg Usfx Ab Sew Technical specifications: MAX. AIRFLOW: 4000 m³/h INLET DIAMETER: 200 mm OUTLET DIAMETER: 180 mm MOTOR SPEED: 2850 rpm DIMENSIONS: 575 x 550 x 500 mm MOTOR POWER / VOLTAGE: 2.2 kW / 400V WEIGHT: 35.5 kg

Būklė: naujas, Gamybos metai: 2026, Reliability proven by our customers who face demanding, large-scale orders on a daily basis. Contaminants from the filter fall directly into a hermetic bag with quick unloading capability. Designed primarily for filtering fine chips and dust of very small granulation in the woodworking and furniture industries. Advantages: • We guarantee purification quality! • Occupies little space yet can extract large volumes of dust and chips • Reliability confirmed by manufacturing plants that handle heavy workloads every day • Heavy-duty, vibration-free hardened construction allows for maintenance-free operation! • Dynamically balanced metal impeller reduces noise levels • 200 mm diameter metal suction nozzle enables significantly higher air flow! • Possibility to build an overhead system and connect several machines simultaneously to DCV E extraction units • Large filter surface area! • Special blade design makes the unit more efficient and reliable, contributing to energy savings • Very high tightness of the entire suction system guarantees top air quality inside the plant and no heat loss during the heating season • Quick change of bag containers designed to maintain 99.99% system hermeticity • The DCV 4500E is another step in efficient chip extraction, ensuring consistently stable extraction parameters throughout the work cycle • This type of extractor ensures perfection and cleanliness at the workstation, directly translating into the quality of your products • Perfectly compatible with machines such as sanders, panel saws, edgebanders, circular saws, and panel saws • Use of this extractor is prohibited in explosive atmospheres Ihjdeuc Uchopfx Ab Sew • The extractor is intended for use in the woodworking industry with chips, shavings, and dust (not suitable for wet materials, e.g., wet chips) • Polyester filter retains dust particles down to 5 microns; for finer particle filtration, use an additional HEPA filter Technical Specifications MOTOR POWER (Continuous S1) 3.0 kW / 400 V, 50 Hz ROTATION SPEED 2900 rpm EXTRACTION CAPACITY 4500 m³/h SUCTION NOZZLE DIAMETER 200 mm SUCTION SPEED 28–32 m/s FILTER SURFACE AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, NEW LOW-NOISE DUST EXTRACTOR / VACUUM MODEL FM230-L1 Robust extractor design and high vacuum pressure enable efficient extraction of chips and sawdust from machines as well as floor cleaning after work is completed. Machine Description - High-vacuum extractor (horizontal impeller arrangement) - Balanced metal impeller - Reinforced motor - Suitable for cleaning entire workshop areas - Large bag capacity - Wide floor nozzle included - Easy mobility thanks to large wheels - Ergonomic handle for maneuvering - High performance and QUIET OPERATION! - Compact dimensions—space-saving in the workshop Years of development by our team have led to the creation of the multi-blade metal impeller of the WhirlWind series, combined with a heavy-duty metal housing forming the heart of the extractor. The vacuum airflow efficiently collects excess sawdust generated during mechanical wood processing. The heavy-duty extractor construction features a reinforced frame for stable, vibration-free operation. The entire structure is further strengthened with properly sized braces supporting both the discharge cylinders and the weight of the waste bags, keeping them secure on a solid base. An additional advantage is the use of a flexible and durable seal placed at a critical point to enhance system tightness. Standard equipment includes a canvas filter bag and a disposable plastic collection bag. Flexible metal bands ensure long-term, trouble-free bag replacements. Swivel, ball-bearing castor wheels provide easy movement of the extractor throughout the facility. Technical Specifications: - CONTINUOUS DUTY MOTOR POWER S1: 0.75 kW Ihsdpfx Absvu A Eao Sew - SPEED: 2800 rpm - EXTRACTION CAPACITY: 1000 m³/h - BAG VOLUME: 60 l - NUMBER OF BAGS: 2 - SUCTION INLET DIAMETER: 100 mm - HEIGHT: 1550 mm - WIDTH: 420 mm - LENGTH: 800 mm - VOLTAGE: 230 V - WEIGHT: 27 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Adjustable extractor for lathes with a wheeled base, providing efficient dust and chip extraction. The set includes a 56-liter chip collection bag and an extraction nozzle measuring 230 x 125 mm. An ideal choice for professional turners and hobbyists alike, ensuring cleanliness and safety in the workshop. Product features: The chip extractor for wood lathes is a reliable tool that ensures effective extraction of dust and chips during material processing. Its main feature is an adjustable nozzle, which allows precise adaptation of extraction to specific needs and working conditions. This ensures you can maintain cleanliness around the lathe, eliminating potential health and safety hazards. The extractor is equipped with a sturdy wheeled base for easy transport and positioning anywhere in the workshop. Whether the machine is used in a fixed location or requires frequent repositioning, the extractor will meet expectations regarding mobility and user comfort. The delivery scope includes a chip collection bag with a diameter of 380 mm and length of 530 mm, offering a capacity of 56 liters. Thanks to its large capacity, uninterrupted operation is possible for extended periods without frequent emptying. Additionally, the set includes a suction nozzle measuring 230 mm (length) by 125 mm (height), ensuring secure and reliable connection between the extractor and the lathe. Whether you are a professional turner or a hobbyist, the lathe extractor with adjustable nozzle and mobile base will help you maintain a clean workshop environment and guarantee safe working conditions. This extractor is also suitable for use with: - Planers - Jointers - Thicknessers - Milling machines - Edge banders - Panel saws Technical data: MOTOR POWER: 0.75kW Ihjdpfx Abovu Aprj Sjw VOLTAGE: 230V / 50Hz WASTE BAG CAPACITY: 56 l EXTRACTION CAPACITY: 1000 m³/h SUCTION NOZZLE DIAMETER: 100 mm FAN DIAMETER: 230 mm VACUUM: 1030 Pa SOUND PRESSURE LEVEL: [value missing in the original text]

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Efficient, mobile, and reliable dust extraction unit with consistent extraction parameters. Capable of connecting up to three machines simultaneously. Ideally suited for various woodworking machines such as panel saws, milling machines, or planers. Device features: Years of effort by our team have resulted in the development of the multi-blade metal impeller from the WhirlWind series, which, together with the robust metal housing, forms the core of the extractor. The negative pressure airflow effectively draws in the excess sawdust generated during the mechanical processing of wood. The heavy-duty construction of the extractor is reinforced with additional supports at the base, ensuring stable and vibration-free operation. Iedjvu Artepfx Ab Sjhw The entire structure is further strengthened with supports of the appropriate thickness, which maintain the discharge cylinders and waste bag weight in the correct position on the solid base. An additional advantage is the use of flexible and durable seals placed at four critical points to improve the overall system’s airtightness. As standard, our extractors come equipped with canvas bags (for filtration and waste), and flexible metal clamps ensure trouble-free bag changes for many years. The use of rotating, bearing-mounted castors ensures smooth movement of the extractor within the facility. Balanced metal impeller guarantees vibration-free and quiet operation Quick mounting for CANVAS extraction bags Four wheels on the base provide exhaust mobility Robust metal construction Standard equipment: Metal mobile base 2 canvas filter bags 2 plastic waste bags Technical specifications: Extraction capacity [m³/h]: 3900 Bag volume [litres]: 150 Number of bags: 2 x canvas – filter bags 2 x plastic – waste bags Suction nozzle diameter [mm]: 1 x 150, 3 x 100 Dimensions (L x W x H) [mm]: 1400 x 570 x 1960 Weight [kg]: 64 Motor power [kW]: 2.2 Power supply: 3-phase, 400V Manual (DTR): Polish language CE declaration: Yes

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The FM300N is a robust industrial-grade extraction fan, designed for the efficient removal of sawdust, dust, and fine wood waste in production plants and woodworking shops. With a high extraction capacity of 2,530 m³/h and a powerful 1.5 kW three-phase motor, this unit effectively supports woodworking processes, ensuring cleanliness, safety, and a high standard of operation. The FM300N model is a reliable chip blower, engineered for intensive use and durability. Key features of the machine: - Extraction capacity of 2,530 m³/h – effective removal of contaminants even during high-intensity operation - 1.5 kW three-phase motor – stable performance even under continuous load - Universal connection system – one 130 mm duct or two independent 100 mm ducts - Construction resistant to mechanical damage – durable, all-metal housing - Energy efficiency and quiet operation – optimized power consumption and excellent acoustic comfort Design and technology: The FM300N is built on a rigid, welded steel frame designed to withstand dynamic loads and harsh industrial environments. A high-efficiency, aerodynamically optimized impeller is mounted directly on the motor shaft, eliminating gearbox-related losses and providing long service life. The device features two 100 mm suction nozzles (or a single 130 mm), enabling connection of two workstations simultaneously or integration with large machinery. The three-phase 400 V motor ensures adequate power and operational stability for industrial facilities. Operating at 2,850 rpm, it guarantees intense airflow, even during prolonged use. The entire unit is designed for easy installation and to maximize workspace efficiency. Precision and performance: The FM300N fan is a reliable sawdust extractor, adept at handling material transport during wood processing—from sanding dust to heavier chips and shavings. Its high airflow capacity enables uninterrupted operation at production workstations, minimizing clogging risk and reducing workplace emissions. Applications: The FM300N is intended for professional use, wherever durability and performance matter. It serves both as a standalone chip extractor and as part of an extensive dust extraction system. Typical applications include: - Carpentry workshops - Furniture factories - Prefabricated wood production departments - Workstations with saws, planers, routers, and sanders Standard equipment: Ihjdpsvu Afgsfx Ab Ssw - Powder-coated steel housing - 400 V / 50 Hz three-phase motor - Suction port: 1×130 mm or 2×100 mm - Integrated stationary mounting base Optional equipment: - Bag filters - Flexible hoses Ø100 mm, Ø120 mm, and Ø150 mm Technical data: Motor power: 1.5 kW Speed: 2,950 rpm Extraction capacity: 2,530 m³/h Suction port diameter: 130 mm / 2×100 mm Discharge port diameter: 120 mm Voltage / frequency: 400 V / 50 Hz Dimensions (L x W x H): 430 x 410 x 450 mm Weight: 24 kg

Būklė: naujas, Gamybos metai: 2026, The most powerful centrifugal fan FAN5.5 achieves an efficiency of up to 7,419 m³/h. The design of the new technological line enabled us to create the LineWind metal turbine system. This is the most important feature of our centrifugal fans, as the increased negative pressure power allows for the extraction of various contaminants, thanks to a special blade system profiled at the appropriate angle. The centrifugal fan is capable of transporting air, chips, sawdust, dust, and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial companies, sawmills, carpentry workshops, mining operations, large buildings, hotels, restaurants, etc. Thanks to its robust design and reinforced, balanced impeller with multiple blades, it guarantees stable, quiet, and vibration-free operation. The fan's high efficiency, due to the optimally shaped blades, significantly reduces power consumption without compromising its high performance. APPLICATIONS FOR THE FAN - Manufacturing industries of various materials - Transport to dryers and drying systems - Carpentry – transportation of chips, sawdust, dust - Agricultural industry – transport of fine granulates - Production – transport of polystyrene granules, etc. - Automotive industry – transport of dusty air, waste products Technical specifications: MAX. AIRFLOW: up to 7,419 m³/h INLET DIAMETER: 300 mm OUTLET DIAMETER: 250 mm PRESSURE: 2,014–1,320 Pa Ihsdevugh Eepfx Ab Sjw DIMENSIONS: 750x750x830 mm MOTOR POWER / VOLTAGE: 5.5 kW WEIGHT: 110 kg

Būklė: naujas, Gamybos metai: 2026, Thermal winding overload protection. The fan's design has been enhanced with additional anti-vibration feet at the base, ensuring stable and vibration-free operation of the device. The most powerful centrifugal fan, FAN11, achieves an airflow of up to 15,445 m³/h. The centrifugal fan is capable of transporting air as well as materials such as chips, sawdust, dust, and other substances like smoke or non-hazardous gases. It is widely used for ventilation in industrial companies, sawmills, woodworking shops, mining operations, large buildings, hotels, restaurants, and more. Ihedpfjvugfwsx Ab Sjw Thanks to its design and reinforced, balanced impeller with multiple blades, it guarantees stable, quiet, and vibration-free operation. High fan efficiency, due to the optimized shaping of the blades, significantly reduces electricity consumption without affecting its high performance. APPLICATION OF THE FAN: - Manufacturing industry for various materials - Air transportation to dryers and drying systems - Woodworking – transportation of chips, sawdust, dust - Agricultural industry – transportation of fine granulates - Production – transportation of polystyrene granules, etc. - Automotive industry – transportation of dust-laden air, waste

Būklė: naujas, Gamybos metai: 2026, The fan, designed based on a radial impeller blade system, is intended for use with waste generated during wood processing. High negative pressure and a powerful motor ensure constant suction performance. Iedpfxovuggbj Ab Sshw Thanks to the many years of experience of the CORMAK team, the FAN series of radial fans were developed. The design of a new production line enabled us to create the metal turbine system LineWind. This is the key feature of the radial fans, allowing for increased suction power to extract various types of contaminants due to a special blade system that has been profiled at the optimal angle. The radial fan was developed for use in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Applications for radial fans: - transport of chips, sawdust, and fine granules - dusty air - local extraction systems - drying systems - dehumidifiers Multi-blade metal impeller! High efficiency ensured by a balanced impeller. Thermal overload protection for winding (thermal sensor). The extraction system's design is enhanced with additional anti-vibration feet at the base, ensuring stable and vibration-free operation. Emergency stop button compliant with PN-EN ISO 12100 and PN-EN ISO 13850 safety standards. An additional advantage is the use of branded, flexible, and durable gaskets in critical locations, ensuring high suction power without losses at individual connection points. Reliability confirmed by Polish users who enjoy daily operation of our machines. Technical specifications: MAX. AIRFLOW: 3000 m³/h INLET DIAMETER: 150 mm OUTLET DIAMETER: 150 mm MOTOR SPEED: 2850 rpm DIMENSIONS (LxWxH): 575 x 510 x 500 mm MOTOR POWER/VOLTAGE: 1.5 kW/400 V WEIGHT: 32.5 kg

Būklė: naujas, Gamybos metai: 2026, The new TC series extraction units are equipped with a fully enclosed upper housing with a warm air return outlet, which absorbs noise and vibrations during operation! The only design in Poland featuring a lock chamber ("śluza"), which protects the motor, filters, and turbine from damage. Compatible with machines such as CNC milling machines, panel saws, edge banders with pre-milling, wide belt sanders, sliding table saws, four-side moulders, etc. Advantages of DCV Dust Extractors: - Durable, heavy-duty construction guarantees quiet and vibration-free dust extraction - The new TC extraction series features a full upper casing absorbing noise and vibrations generated during operation, as well as the option for warm air return - Very high airtightness of the entire suction system ensures the best possible air quality in the workplace, with no heat loss during the heating season - Powerful and quiet radial fan guarantees high negative pressure performance - Capability to create an overhead ducting system to simultaneously connect several machines to the DCV extractors - Reliable filter cleaning system with automatic cycle option - Mobile chassis for easy relocation of the units throughout the facility - Waste containers designed to maintain 99.99% system tightness, and equipped with a mobile chassis system - Control cabinet for starting/stopping the device - Polyester filter captures dust particles as small as 5 microns; for finer filtration, a HEPA or similar filter is required - Do not use this extractor in explosive atmospheres - The extractor is not suitable for operation with wet materials (e.g. wet sawdust) - Before starting the extractor, remove the lower beam for unobstructed access to the chip containers - Warm air return/reduction is available at an additional charge Technical Specifications MOTOR POWER (Continuous duty S1): 7.5 kW / 400 V, 50 Hz ROTATION SPEED: 3000 rpm EXTRACTION CAPACITY: 8900 m³/h SUCTION INLET DIAMETER: 300 mm SUCTION VELOCITY: 28–32 m/s Ijdpfx Aoudaazob Sjhw FILTER SURFACE AREA: 20 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 45 DIMENSIONS: 1170 x 2400 x 2240 mm WEIGHT: 500 kg

Būklė: naujas, Gamybos metai: 2026, Thanks to many years of experience of our CORMAK team, the DCV series extractors in the TC Viber version have been developed. The design of a new technological line has enabled us to create top-class extractors. Advantages: - Equipped with an additional pair of doors for easier bag replacement - The DCV 6500TC extractor marks another milestone in the production of efficient dust and chip extractors, designed to maintain consistent extraction parameters throughout the entire work cycle - The new TC series offers a fully enclosed upper housing that absorbs noise and vibrations during operation, as well as the ability to return warm air Ijdpfx Aeuc U N Uob Sehw - Maintenance-free filter shaking system with the option for automatic operation - Newly patented safety system ensures reliable operation of the device - Durable, robust construction ensures quiet and vibration-free operation of the extractor - Compact footprint, yet capable of filtering large amounts of dust and chips - Powerful and quiet fan provides high negative pressure performance - Reliability confirmed by manufacturing facilities coping with high daily workloads - Specially designed impeller blades make the units more efficient and effective, also contributing to energy savings - Very high tightness of the entire suction system guarantees the highest indoor air quality and, during the heating season, prevents heat loss - Large filter area - Possibility to build an overhead system connecting several machines operating simultaneously with DCV 6500 extractors - Fast replacement of waste bins, designed to maintain 99.99% system airtightness - Metal waste bins with mobile running gear for easy and trouble-free movement. Also equipped with a sight glass to check the fill level of the containers - Low-noise operation and high efficiency ensured by a balanced metal impeller and upgraded motor - Provides perfection and cleanliness at the workstation, directly impacting the quality of your products - Excellent cooperation with machines such as sanders, edgebanders, panel saws, etc. - Control cabinet for switching the device on/off - We guarantee high purification quality! - Polyester filter traps dust down to 5 microns; for filtering smaller particles, use e.g. a HEPA filter - Do not use this extractor in explosive atmospheres - The extractor is intended for use in the woodworking industry with sawdust, chips, and dust (not suitable for wet material such as wet sawdust) - Before starting the extractor, remove the lower beam to allow access to the chip containers - MADE IN POLAND Technical specifications: MOTOR POWER (CONTINUOUS S1): 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 6500 m³/h SUCTION PORT DIAMETER: 280 mm SUCTION SPEED: 28–32 m/s FILTER AREA: 16 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 32 WASTE BIN CAPACITY: 500 L DIMENSIONS: 2440 x 930 x 2270 mm WEIGHT: 440 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The most powerful single-bag workplace extraction unit! The vacuum airflow efficiently sucks up excess sawdust generated during woodworking machine operation. The extractor is equipped with a 180° rotatable suction inlet. Iodpfxevu Aykj Ab Sshw Device Description - Suitable for chips from milling machines, planers, and saws - High suction power - Easy to move thanks to the rolling system - Metal impeller and housing - Quick-release system for filter and collection bag - The suction device can be rotated 180° to facilitate connection of extraction hoses - Set includes one fabric filter bag and one plastic collection bag Technical Specifications Motor: 1.5 kW / 400 V Speed: 2850 rpm Bag capacity (diameter / length): 190 L (500 mm / 1100 mm) Maximum output: 3200 m³/h Inlet: 150 mm / 3 x 100 mm Impeller diameter: 300 mm Dimensions: 985 x 560 x 2210 mm Weight: 45 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Chip and dust extractor model FM300 is a simple device designed for the extraction of chips and sawdust. The possibility of quick bag replacement and mobility achieved through the mobile base with castors make our extractor highly practical. Additionally, the metal impeller ensures quiet operation. Despite its reliability and high performance, the price of the unit remains attractive for the customer. - The balanced metal impeller guarantees vibration-free and quiet running - Quick mount for the CANVAS dust collection bag - Four castors in the base provide mobility for the extractor - Stable metal construction Standard equipment: - Y-shaped extraction nozzle 2 x 100 mm - Metal mobile base Optional equipment: - 100 mm extraction hose - Galvanized clamp Ihsdpfxevu Atwo Ab Ssw - Plastic collection bags Technical data: Extraction capacity [m³/h]: 2530 Motor speed [rpm]: 2850 Bag volume [l]: 150 Number of bags: 2 Suction port diameter [mm]: 1 x 130, 2 x 100 Dimensions (L x W x H) [mm]: 940 x 510 x 1960 Weight [kg]: 56 Motor power [kW]: 1.5 Power supply: 3-phase, 400V Manual (DTR): Polish language CE Declaration: Yes

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The FM350N fan is a highly attractive offer with an excellent price-to-performance ratio. The capability to connect four devices simultaneously, combined with its high motor power, makes this machine indispensable in carpentry workshops. Machine specifications: MOTOR POWER: 3.8 kW SPEED: 2950 rpm Iodpfx Aovu Anueb Sshw EXTRACTION CAPACITY: 4,860 m³/h SUCTION NOZZLE DIAMETER: 4 x 100 mm / 1 x 180 mm VOLTAGE / FREQUENCY: 3/400V WEIGHT: 51 kg