Briketavimo presai pirkti naudotą (103)

Sąlyga: naujas, Gamybos metai: 2024, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Cedpolht H Ejfx Admohf Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Location: 54634 Bitburg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, briketo skersmuo: 60 mm, Refurbished machine suitable for smaller single-shift carpentry workshops. It offers a robust design with reliable performance. Maximum briquette output is 70 kg/h. Year of manufacture: 2003. Very good and well-maintained condition. Original warranty and post-warranty service directly from our company. Professional PRODECO hydraulic briquetting presses are suitable for small and medium-sized woodworking operations. They enable efficient processing of waste into ecologically clean and highly calorific fuel without the use of binders. These machines are characterized by their compact footprint, low energy consumption, and easy operation. Technical specifications: - Motor power: 5.5 kW - Briquette output: 35 to 70 kg/h depending on material - Briquette diameter: 60 mm - Briquette length max: 60 mm (so-called endless briquette) - Hopper diameter: 1000 mm - Weight: 650 kg - Machine dimensions: 1170 x 1700 x 1510 mm Features: - Hydraulic unit with 7 pressing cycles per minute - Dual pressure gauge for improved pressure control - Height sensor for briquetted material level - Oil level sensor - Inspection window - CE safety standard - Moisture content of processed material must not exceed 18% Csdpfxevva Rpe Admehf The machine is refurbished, adjusted, and tested.

Sąlyga: naudotas, Gamybos metai: 2019, Aukštis: 1510 mm, Ilgis: 1700 mm, Plotis: 1170 mm, Svoris: 650 kg. Darbo valandos: 1004 SAVYBĖS: Alyvos hidraulinis įrenginys. Cortina 5,5 kW IE-2 (didelio efektyvumo) variklis. Gamyba: 15/70 kg/val. Cilindro ø: 1000 mm. Ciklų per minutę: 7. Stūmoklių skaičius: 3. Vienos dalies spaustuvas: 1 vnt. Maksimalus briketų ilgis: 50 mm. Laiko reguliuojamas pašildymo įtaisas darbui atšiauriomis klimato sąlygomis. Jautrus zondas. Alyvos lygio ir temperatūros zondas rezervuare. Matymo langelis. Ciklo pabaigos įtaisas. Galvutė su čiaupu. Elektroninis slėgio daviklis siurblio slėgiui. Cedpsxyh Iyofx Admohf Pilnas elektros skydas SIEMENS PLC jutikliniam ekranui. Įtampa: 400V-50Hz.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1921, Funkcionalumas: visiškai funkcionalus, briketo skersmuo: 90 mm, bendras svoris: 6 000 kg, galia: 55 kW (74,78 AG), paskutinio kapitalinio remonto metai: 2025, Pilna linija su 2 presais puikios būklės! Variklis apie 55 kW, našumas apie 1.400 kg/val., presavimo cilindras apie 90 mm (su arba be skylės!), išankstinis pašildymas iki maždaug 60 °C (uždaras ciklas su šilumos grąžinimu per alyvos baką). Visiškai automatinis kapavimo pjūklas, visiškai automatinis padavimo mechanizmas, įskaitant valdymo spintą. Pakavimo sistema susideda iš: 1 guminių konvejerių juostos (briketų padavimas); po to – susitraukimo tunelio sistema, 400 V, angos ilgis apie 1.600/600 mm, aukštis maks. apie 200 mm, ritininė išleidimo dalis apie 3 m. Priešbunkeris (silo) apie 20 m³ presos užpildymui. Codpfx Adexdrz Esmohf

Sąlyga: naujas, Gamybos metai: 2025, Hydraulic briquetting press with 4 kW main motor. 50 mm briquette diameter. Capacity: 30–50 kg/hour. 1 m³ hopper, oil cooler. Csdpfjf Hmi Eex Admohf

Sąlyga: naujas, Gamybos metai: 2025, Dimensions: length 1800 mm, width 1800 mm, height 1900 mm. Net weight: 3,000 kg. Chjdoc Nb Rfepfx Admof Electrical power of the press: 380 V, 50 Hz, 33 kW, 70–100 A. Productivity of the press: 450–500 kg/h. Pressure: minimum 1,000 kg/cm², maximum 1,700 kg/cm². Briquette dimensions: length 150 mm, width 60 mm, height 40–105 mm.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 1 h, Super special price, as it was operated during our in-house exhibition. Operating hours: 1 Immediately available – subject to prior sale Once it’s gone, it’s gone. Compact design, high reliability, and excellent price-performance ratio: these are the advantages of this machine, which is ideal for briquetting materials such as wood, polystyrene, foam, or paper. Special Feature: The screw pre-compaction guarantees high briquette quality. For rapid and straightforward installation, the C 140 is mounted on a sturdy base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and geared motor Screw channel with discharge screw and geared motor Accessories: Briquette length monitoring Automatic on/off Csdpfxetnz Tte Admjhf Location: 54634 Bitburg

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2004, galia: 30 kW (40,79 AG), INCOMPLETE NOT TESTED hydraulic power supply: 400V / 50Hz / 70A Cjdeqd U Smspfx Admehf capacity: 440–500 kg/h fully automatic

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Used machine Condition: Excellent Briquette cutting system Hydraulic machine Chodpfjw E Iyijx Admef CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)

Sąlyga: naudotas, Briketų presas Gross GP 80 Variklio galia: 7,5 kW, Codpfx Ajxpgyasdmohf Briketo skersmuo: 60 mm, Talpyklos matmenys: 145 x 145 cm Svoris: 1200 kg Gamybos metai: 2016

Sąlyga: naujas, Gamybos metai: 2025, Mała hydrauliczna prasa brykietująca. Silnik główny o mocy 4 kW, średnica brykietu 50 mm. Wydajność prasy wynosi 30–50 kg/h. Maszyna jest nowa i posiada certyfikat CE. Klient może zamówić ją z chłodnicą oleju. Więcej informacji znajdziesz na naszym kanale YouTube, stronie internetowej lub profilu na Facebooku. Chsdpfx Ajfk N Tpodmsf

Sąlyga: naujas, Gamybos metai: 2025, Good, used demonstration machine Availability upon agreement Very robust machine with high pressing force - Also suitable for producing marketable briquette quality *depending on material. The large-dimensioned press cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in use by satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net (can also be retrofitted later) * cools the pressing jaws (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation longer than 4 consecutive hours. Customs tariff number: 84793010 Briquette diameter: 70 mm Front bushing: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Performance (material dependent): up to 150 kg/h* *dependent on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm * with large chamber 1600 mm Height: 1700 mm Weight: 1250 kg Cedpfsd Nm Sijx Admshf Oil capacity: 220 liters Silo diameter: 1200 mm Silo volume: approx. 1 m³ Pump: 75 liters Hydraulic pre-compactor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of the press jaw and hydraulic oil via cooling unit (special accessory) Filling level monitoring option: yes Continuous briquette option: yes (material dependent) Option enlarged filling slide: yes, with enlarged filling slide as special accessory CE compliant Raw material requirements: - Moisture content (atro) must be between 6% and 18% - Chip length max. 20 mm - Installation temperature: temperature-controlled room with at least +5°C - Feeding must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise result

Sąlyga: naujas, Gamybos metai: 2024, Your Advantages Stable pressing mechanism with low-wear, chrome-plated jaws Press chamber wear bushing Pre-compressor with end-position damped cylinder and bolted cover Control cabinet with PLC control Screw channel with discharge auger Separate oil tank with pump motor and valve control Oil temperature safety switch Mounted on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, minimal space requirement: The C-series machines are particularly suitable for small and medium-sized companies with required throughput capacities not exceeding 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood, polystyrene, foam, paper, or biomass. All machines are available in left- or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Throughput capacity up to (kg/h): 50 (material-dependent) Hydraulic motor (kW): 5.5 Auger motor (kW): 0.55 Oil capacity (litres): 100 Codpfx Adscnz U Eomohf Weight (approx. kg): 800 Key Features at a Glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for continuous operation Briquette length monitoring: Adjusts the briquette length to a uniform value Press chamber wear bushing: Prevents wear in the pressing area Location: Ex works – free loading

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2014, briketo skersmuo: 150 mm, bendras svoris: 3 000 kg, galia: 30 kW (40,79 AG), Output: 450–500 kg/h Cedpfx Aoqd Uy Aedmjhf Maximum pressing force: 1700 kg/cm² Feedstock moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 6 h, *Machine at a special price* Our bestselling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Options available at extra cost: *Surcharge for fill level sensor enabling automatic operation: + €995 net *Surcharge for large pre-compaction chamber: + €970 (recommended for very light material such as straw) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *depending on bulk density *based on bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 27 liters Hydraulic pre-compactor Cooling option for press clamp: no Hydraulic oil cooling option: yes Fill level monitoring option: yes CE compliant Raw material requirements: - The moisture content (atro) must be between at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperate room at a minimum of +5°C Cjdpfx Aegl Nlmjdmehf - The customer must ensure there is no hydraulic oil loss - Feed material must be free of metals and mineral impurities such as sand, stones etc. Damage to press tooling and/or increased wear may result

Sąlyga: naujas, Gamybos metai: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput rates of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options are feasible, such as an oil cooling system for multi-shift operation. All machines are available in left-hand or right-hand configurations. Installation on a stable base frame ensures quick setup and enables mobile use. User-friendly operation thanks to Siemens PLC control To fulfil our performance promise, we design and manufacture all control cabinets in-house at the Ilsfeld site, equipping them with components from renowned international brands. This guarantees the highest quality in a compact design. The Siemens PLC control system is perfectly tailored to the requirements of the briquetting process. Contaminant-resistant feed screw via cardan suspension Codpfjil Hggox Admjhf The feed screw, which conveys material to the briquetting press pre-compactor, is suspended using a cardan joint. This prevents contaminants from damaging the feed screw. As is often the case, the specific application determines the most suitable suspension. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Max throughput (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (litres): 250 Weight (approx. kg): 1100 Location: Ex-stock 54634 Bitburg - Immediately available - Subject to prior sale

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 8 h, Good, used demonstration unit. Availability upon agreement Very robust machine with high pressing force – also suitable for producing a saleable briquette quality* depending on material. The large dimensioned press cylinder and the 80 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit: €4,995 net (can also be retrofitted later) * Cools the press clamp and the hydraulic oil (recommended if the press is to run regularly for more than approx. 3.5 hours without interruption) Briquette diameter: 80 mm Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Output (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compactor Option for press clamp cooling: Yes, with special accessory – coolable press clamp Hydraulic oil cooling option: Yes Cooling of press clamp and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: Yes Chsdpfxexfwds Admjf Continuous briquette option: Yes (depending on material) Enlarged filling slider option: Yes, with special accessory – enlarged filling slider CE compliant Requirements for raw material: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled space at minimum +5°C - The feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise result.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 1 h, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Codpfjtnz Hbjx Admohf Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Location: 54634 Bitburg

Sąlyga: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Chodpfx Adefmqq Eemsf Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Sąlyga: naujas, Gamybos metai: 2024, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, Styrofoam, foam, or paper. Special feature: the screw pre-compaction system guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Chedpfx Ajbtnf Esdmjf Weight (kg): 530 Equipment: Press - High-performance pressing mechanism with wear-resistant, chrome-plated jaws - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: - Briquette length monitoring - Automatic On/Off Location: 54634 Bitburg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Briketavimo presas skirtas medienai arba medienai panašioms medžiagoms Našumas: apie 80–100 kg/val. Briketo dydis: 60 mm cilindrinis Variklis: 7,5 kW Alyvos šildytuvas 6374 darbo valandos Matmenys: apie 2150 x 1700 x 1400 mm Talpos dydis: 1400 x 1400 x 920 mm Papildomai: Gali būti komplektuojama su ištraukimo sistema kaip bunkerio priedas. Reikalavimai: Išeitinė medžiaga idealiai turėtų būti trumpesnė nei 25 mm ilgio drožlės Drėgnis: 6–12 % ATRO Chodsw Hpizspfx Admof Mašina tinkama nepertraukiamam veikimui. Pvz., iki 2 valandų briketavimas, 1 valandos pertrauka ir kt. Jeigu reikia, kad mašina dirbtų ilgiau nei 2 valandas be pertraukos, būtina sumontuoti papildomą aušinimą.

Sąlyga: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Chodpfx Adeffh Atomsf Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Sąlyga: geras (naudotas), Refurbished Used Machine Base machine price from: €147,700 net *Options available at extra cost, see below with full 1-year warranty Delivery approx. 16 weeks after order Technical data: Throughput capacity up to 1200 kg/h (material dependent) (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm including 2 m press channel Main motor power: 45 kW Feed screw geared motor: 2 x 2.2 kW Compressor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Chjdpfs E Dqusx Admef Control panel with plain text display for operational status and load indicator for main drive and feed screws PLC control Siemens S7/300 with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, sturdy steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT -Temperature control unit for press tools For maintaining the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch. Fully wired and ready to operate – essential for operation including corresponding control system €7,850 net -Guillotine, for cutting briquettes to length Compressed air connection required onsite €6,940 net plus VAT -Transport duct / cooling section (nominal: 4 x 2 m) per 2 meters: €990 net Assembly / Commissioning (nominal per press approx. 2-3 days onsite) Billed according to actual effort, at the following rates: Service technician/mechatronics engineer per installation & travel hour: €129.00 Overtime: +25% surcharge Each Saturday & night hour: +50% surcharge Each Sunday & public holiday hour: +100% surcharge Travel expenses per technician per day: country-dependent Per car/transporter & km: €0.98/km Travel and accommodation on submission of receipts or flat rate at the client’s expense. Test with customer’s own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net --- Raw material requirements: - Moisture content (oven-dry basis) must be at least 6% and max. 18% - Maximum chip length 20 mm - Installation temperature: heated room with at least +5°C - Feed must be free from metals and mineral contaminants. Damage to die tools and/or increased wear may otherwise occur.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 29 h, Another machine available immediately ex works Neckartailfingen *Subject to prior sale *Silo available at an additional charge Press exclusively deliverable with a plant component, such as shredder, granulator, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette suppliers. Codpfxjfhql To Admjhf Type Classic – throughput up to 425 kg/h *depending on material Options available at extra charge: Plant engineering / mütek Systemtechnik: - mütek MRZ shredder technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Various control system interconnections - Semi-automatic packaging technology Your advantages: Key point: + Very established, mature die press from 25 years of experience. The challenges and know-how are in the details, e.g. top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data, briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your feed material *based on a bulk density of 200 kg per cubic meter Specific information after successful test with your material. If no test material is provided, we cannot guarantee briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - Moisture content (air-dried) must be between min. 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: +8°C ambient - Feed material must be free from metals and mineral contaminants such as sand, stones, etc.; otherwise, damage to the pressing tools and/or increased wear may occur.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Machine available at a special price Csdpod Nnwlsfx Admshf Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net