Būklė: geras (naudotas), Gamybos metai: 2015, mašinos/transporto priemonės numeris: 0-200-24-0779, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 55 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, bendras ilgis: 10 825 mm, Used single-sided HOMAG edge banding machine for straight edges; designed for jointing, edging, and post-processing various edge materials. Fixed fence side left. Year of manufacture: 2015 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed device, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift-off function at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Jointing unit, climb/counter rotation 2x4kW, demand-actuated Iisdpfoy A I Sgex Alrsc horizontal positioning via NC motor (CAN) GLUING SECTION A20, comprising: - QA60 glue application unit with PTFE coating (Teflon) - Pre-melter for EVA adhesive. - Suitable for both EVA and PUR adhesives - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 horizontal end trimming unit, 2 motors each 0.8kW (front/rear edge) chamfer/straight cut, as well as trimming excess - Pre-/Flush trimming unit 1.15 kW, top/bottom - FK11 contour trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled from the operator panel various interchangeable heads equipped with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraper top/bottom - Flat scraper top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Būklė: naudotas, Gamybos metai: 2007, bendras aukštis: 2 200 mm, bendras ilgis: 7 500 mm, bendras plotis: 1 500 mm, Weight: 4,000 kg Price: On request - Year of manufacture: 2007 Iodpfxsyzp Akj Alreic - Documentation available: No - CE marking available: Yes - CE certificate available: No - Serial number: - Number of units: 8 - 1st unit type: Pre-milling unit - Tools available: Yes - 2nd unit type: Glue unit - 3rd unit type: Pressure rollers - Tools available: Yes - 4th unit type: End trimming unit - Tools available: Yes - 5th unit type: Rough trimming unit - Tools available: Yes - 6th unit type: Corner rounding unit - Tools available: No - 7th unit type: Flat scraper unit - Tools available: Yes - 8th unit type: Brushing unit - Tools available: Yes - Voltage [V]: 400 - Power consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (L x W x H) - Transport weight [kg]: 4000kg Financial information VAT: The stated price is exclusive of VAT VAT/Margin scheme: VAT deductible for business customers Delivery and trade-in are possible at any time for all industrial equipment Yorick Diebels

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures comprehensive edge processing at all stages, as it comes equipped with all the components required for your needs: pre-milling unit, end trimming saw, milling unit, radius scraping blade, corner rounding unit, surface scraper, and cleaning station. For even greater flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and glue application tailored to the workpiece for edge materials up to 3 mm; pre-milling unit (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation including glue drain feature, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version), corner rounding cutter, radius scraper, surface scraper (including pneumatic lift), cleaning station, robust chain feed, ball-bearing mounted double pressure roller, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper blade (R1/R2) Iiodpfelht Hwox Alrsc F5/24/1 Spray unit for separating agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spraying unit F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, bevel, and flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 – 10 m/min feed speed Edge Banding Machine F2 next With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 mobile base Iiedpji Am U Dofx Alrjc F2/30 pneumatic 3-point adjustment (radius, bevel, and flush milling)

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: Iijdpolht Hzjfx Alroc F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: naujas, Gamybos metai: 2025, Hebrock F 4 For complete processing of your panels For those who don't do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges in just 4 m of machine length. The F 4 is not just space-saving – it is also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm PLC control via 10" touchscreen Top-mounted quick heating glue pot (maintenance-free) Support disc for edge material Automatic central lubrication (cut-off saw, corner milling unit) Optical indicator for workpiece sequence Outrigger (extendable to the front) Quick-change glue pot preparation including glue change device, suitable for PUR processing Surface scraper with dual sensor system Pneumatic trim shear (scissor-type design, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed, special chain plates Joiner Milling unit Cut-off saw Iijdpohqadcsfx Alroc Corner milling unit Accessories: F4/09 radius scraper (incl. pneumatic lift-out) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: From stock 54634 Bitburg – available at short notice –

Būklė: naujas, Gamybos metai: 2025, The Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately Available - This Hebrock evergreen offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a profile milling unit and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: • Hebrock K 36 – 15 m/min • K36 Edge Banding Machine • With PLC control (incl. 15" touchscreen), hot-melt adhesive provision directly onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm milling depth, maintenance-free coated glue pot with quick-change preparation incl. glue discharge device, high-frequency double-motor end trim saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic adjustment and quick-change insert milling cutter (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-out device), buffing station, robust chain drive, double-roller upper pressure with ball bearings, aggregate viewing windows on both machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge banding on workpieces up to 60 mm thick • 36/08/1 Quick-change corner rounding unit • 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 • 36/09/1 Multi-radius scraper • 36/24/1 Separator spraying device • 36/24/2 Cleaning agent spraying device • 36/25 Edge protective spray • 36/27 Nesting (1x milling station + 1x radius scraper) • 36/30 Pneumatic 3-point adjustment • 36/30/1 Multitool for HF milling station (R2/R1/chamfer) Iiodpfxoi Am Uko Alroc • 36/45 Axis package for motorized adjustment of panel/edge thickness and jointing depth settings Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 ensures comprehensive edge processing in every step, as it comes equipped with all the components necessary to meet your requirements: jointer, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even greater flexibility towards achieving the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and hot-melt adhesive application onto the workpiece for edging materials up to 3 mm; jointer (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change facility including glue discharge device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window from the machine’s rear, extendable workpiece support, feed speed approx. 10 m/min. Iijdoi Anadjpfx Alroc F5/08/4 Quick-change unit corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: ex stock 54634 Bitburg Available calendar weeks: 4/2024

Būklė: geras (naudotas), Gamybos metai: 2011, Single-sided edge banding machine, right-hand version with workpiece return, suitable for hot-melt or/and PU bonding, used, year 2011, approx. 8,700 operating hours. Edge thickness: 0.4 – 10 mm Workpiece dimensions: Minimum width: 70 mm, minimum height: 8 mm, maximum height: 60 mm, minimum length: 150 mm Feed speed: 14 – 20 m/min, steplessly variable Adhesive application: adhesive application roller with Vario-melt dosing automation Working height: 900 mm Machine dimensions: height: 1,600 mm, width: 1,100 mm, length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: - Double pressure rollers with electronic positioning - Pneumatic control of all units via central touch-screen operation with Beckhoff industrial PC Iedpfx Alezb Iuqersic - CM – CombiMelt gluing system Processing units: - FK – Jointing unit for joining particle boards with 2 HF motors, 2.2 kW, 200 Hz, 12,000 rpm, configured for synchronous and counter rotation, feed-controlled. Tool: DIA jointing set Ø 85 x 45 x 30, z 3, for panel thicknesses up to 42 mm - AKM – Edge magazine for automatic feeding of strip edging, with spiked roller feed and pneumatic pressure beam. Including optical edge monitoring - M4+1 – Fourfold magazine, automatic reel retraction, accommodates four edge reels, with variable edge slot for alternate edging, with automatic selection menu - K 13 – Double end trimming unit with 2 HF motors 0.6 kW, 200 Hz, 12,000 rpm, motors and saw blades pneumatically tiltable 0/5° - K 160 – 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 - Bfc – Flush trimming unit for pre-trimming the glued edges in counter rotation. Single-sided sensing, feed by program control, 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm. Tool: 2 HM reversible knife heads Ø 70 x 20 x 16 mm, z 4 (HF70) - HFt – Fine trimming unit for radius milling of glued edges in counter rotation. Double-sided sensing, automatic adjustment by program to edge thickness. 2 HF motors 0.3 kW, 200 kW [likely typo, should confirm], 12,000 rpm. Tool: 2 HM reversible knife heads Ø 70 x 20 x 16 mm, z 4 (HF70); optionally equipped with radius tools - HFt – Fine trimming unit for radius milling of glued edges in counter rotation. Double-sided sensing, automatic adjustment by program to edge thickness. 2 HF motors 0.3 kW, 200 kW [likely typo], 12,000 rpm. Tool: 2 HM radius-reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible blades R 1 – R 3 - AKF – Automated copying milling unit with two separate operating spindles for top and bottom; 2 HF motors 0.37 kW, 200 Hz, 12,000 rpm, tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16, with integrated extraction - AZK 4 – Automatic changeover unit for scraping knives - ZKf – Surface scraper unit with fine adjustment for removal of glue residue in the joint area, with extraction Additional equipment: - AS – Antistatic spray unit, double, on glue joint - GS – Lubricant spray unit for applying antistatic lubricant to the edge surface, electronically controlled - RS – Cleaning set with 4-fold spraying device and fine buffing unit for surface cleaning - KEO-c – Edge polishing, oscillating and automatically adjustable, 2 motors 0.2 kW, with 2 cloth discs - WE – Angle insertion aid as folding push sled for small parts - Interface for workpiece return Ligmatech ZHR 05 or equivalent

Būklė: naudotas, Sandėlio vieta: Sonnefeld Iiodpfx Aoway Dcelroc

Būklė: naudotas, Gamybos metai: 1996, Krašto storis: 0,4 - 12 mm Ritininio krašto storis: 3 x 45 mm arba 0,8 - 60 mm Minimalus ruošinio plotis: 65 mm Minimalus ruošinio ilgis: 160 mm Ruošinio storis: 10 - 55 mm Pasiūla: 13 m/min Išankstinis frezavimas (sujungimas) Klijų rezervuaras Quickmelt Klijavimo mazgas Nupjovimas Briaunos frezavimas Fasavimo frezavimas Spindulinis frezavimas Kampų kopijavimas Plokščia traukimo ašmenys Šlifavimo agregatas Staklių matmenys: 7450 x 1220 x 2400 mm Svoris: 3000 kg Sandėliavimo vieta: Nattheim Iijdjvvkd Tjpfx Alroc

Būklė: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection Ijdjvvkfdjpfx Alrjic - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Būklė: naudotas, Gamybos metai: 2001, Briaunos storis: 0,2 - 6 mm. Ruošinio matmenys: plotis min. 70 mm; aukštis min./maks. 8 / 42 mm; ilgis min. 150 mm (juostinės briaunos). Padvės greitis: 12 m/min. Klijų užnešimo volelis. Mašinos matmenys (I x P x A): 3500 x 900 - 1300 x 1250 mm. Svoris: apie 1130 kg. Jungiamoji galia: apie 6,0 kW, 400 V, 50 Hz. Komplektacija: dviguba viršutinio prispaudimo sistema su rankiniu aukščio reguliavimu, automatinis žurnalas apvyniotoms briaunoms iki 800 mm skersmens, greito šildymo klijų vonelė su užnešimo voleliu tiesioginėje ir priešinėje eigose, pneumatinis visų darbo agregatų įjungimas ir grąžinimas, pneumatinės kapojimo žirklės juostinėms briaunoms iki 3 mm, rankiniu būdu reguliuojamas įvedimo liniuotė, dviguba trumpinimo pjūklas – 2 HF varikliai, po 0,2 kW, 12 000 aps./min., 2 automatinės padėtys: 0 ir 3 laipsniai, kantavimo/frazerio agregatas su 2 HF varikliais po 0,43 kW, 12 000 aps./min., dvišalis palietimas, su dviem HF reversiniais peilių galvutėmis, spindulio glotninimo peilis, automatiškai valdomas, plokščias glotninimo peilis, automatiškai valdomas. Sandėlio vieta: Nataimas. Iisdpfx Alovvkfqersc

Būklė: naudotas, Gamybos metai: 2002, Mašinos ilgis: 6240 mm Svoris: 2400 kg Prisijungimo galia: 14 kW Ištraukimo skersmuo: 120 / 140 mm Sandėliavimo vieta: Nattheimas Iisdpfx Asvvkfwolrec

Būklė: naudotas, Gamybos metai: 2011, pneumatinis frezavimo nustatymas (tiesus/radiusas) Kombinuota frezavimo stotis R=2 Kampų apvalinimo freza R=2 iki 40 mm Sujungimo freza iki 40 mm Plokščias grandiklis Profilinis grandiklis R=2 trumpoms detalėms Valdymas SPS su Pro Face jutikliniu ekranu Nestingas Aušinimo/antistatika purškimas - airtronic Apsauginis briaunos purškimas Riepe su keičiamu rezervuaru Ruošinio storis: 8–60 mm Mechaninis briaunų spaudimas Ištraukimo jungtis: 140 mm Matmenys: Ilgis su išsikišimu: 4984 mm Gylis su ritininiu stalu: 1425 mm Maks. aukštis: 1618 mm Darbo stalo aukštis: 888 mm Svoris: 1400 kg Iijdpjxyiilofx Alroc Sandėliavimo vieta: Nattheim

Būklė: naudotas, Gamybos metai: 1999, Briaunos aukštis: 10 - 60 mm Briaunos storis: 0,4 - 3 mm Minimalus kreivės spindulys: 20 mm Padavimo greitis: 2 - 18 / 4 - 14 m/min. Variklis: 5,2 kW Oro slėgis: 6 bar Matmenys: 900 x 1300 x 1200 mm Svoris: apie 350 kg Sandėliavimo vieta: Nattheim Ijdeymcrbspfx Alroic

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Iijdpswlbxlefx Alrsc Solid wood thickness: 22 mm PVC/ABS thickness: 3 mm Feed speed up to 25 m/min Electrically adjustable working height via CNC Motorized panel support guide, electronically adjustable via CNC Anti-adhesive unit Prefeeder unit with 2 motors, adjustable electronically via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors and dynamic extraction system following the blades at every movement Offset trimming/chamfering unit with 2 motors, electronically adjustable via CNC Non-stick unit Multifunction corner rounding unit with 2 motors (chamfering + corner rounding) Electronic edge scraper unit, adjustable via CNC Glue scraper unit Brush group “SP-501” Automatic return system with overhead discharge Winner 4A

Būklė: naudotas, Gamybos metai: 2015, Parduodame Felder Perfect 710 komplekte su dviem papildomais katilais. Viskas veikia ir paruošta iškartiniam naudojimui. Ijdpfx Ajzc Ikhelroic Kas įeina į komplektą: Felder Perfect 710 2 papildomi katilai Dėl apžiūros, papildomos informacijos ar nuotraukų susisiekite su manimi.

Būklė: geras (naudotas), Kantavimo staklės Hebrock top 2000 Klijų padengimas voleliu Pneumatinė išankstinio pjovimo giljotina Prispaudimo voleliai Galutinis nupjovimo pjūklas Frezuojantis agregatas viršus-apačia R1-R2 Ijdpfxoy Rpicj Alrsic Maksimalus ruošinio aukštis 50 mm Maksimalus briaunos storis ritinyje 3 mm Padavimo greitis 10 m/min Staklių ilgis 310 cm Tvarkinga, geros būklės staklės.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Parduodama naudota kraštų laminavimo staklės BRANDT KDF 440 C, HOMAG grupės gamyba. Pagaminimo metai: 2017 Priešfrezavimo agregatas Klijavimo agregatas Iiodpfszc D D Dox Alrjc Spaudimo zona Kirtimo agregatas (2 varikliai) Daugiaetapis frezavimo agregatas Forminis frezavimo / kampų kopijavimo agregatas (1 variklis) Profilinė ir plokščioji traukimo geležtė Poliravimo agregatas Pasiūlos greitis 14 m/min Galima naudoti EVA ir PUR klijus PoweTouch valdymas PU viršutiniai spaudimo voleliai Nedaug darbo valandų Galima įsigyti nuo 2026 m. birželio Labai gera būklė.

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, BRANDT KDF 1630 PROFI LINE KRAŠTŲ KLĖJIMO STAKLĖS PARDUODAMOS GEROS BŪKLĖS, NAUDOTOS! VEIKIA PUIKIAI! Ijdpfszdnp Ssx Alroic

Būklė: geras (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 0-200-01-2196, Funkcionalumas: visiškai funkcionalus, įėjimo srovė: 63 A, aukščio reguliavimo tipas: elektrinis, X ašies padavimo greitis: 25 m/min, pavaros tipas: elektrinis, bendras aukštis: 2 000 mm, bendras ilgis: 7 850 mm, bendras plotis: 2 300 mm, bendras svoris: 5 000 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Kraštų laminavimo staklės, geros darbinės būklės, visiškai elektriniai reguliavimai, darbo greitis 25 m/min, galima naudoti iš karto. Isdpfxjy Ebl Ss Alreic

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, galia: 18 kW (24,47 AG), ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 15 mm, aukščio reguliavimo tipas: elektrinis, pavaros tipas: elektrinis, bendras svoris: 3 000 kg, Įranga: CE žymėjimas, OTT Tornado + beveik naujas su viršutiniu diržiniu spaudimu. Pilna komplektacija įskaitant TextureFinish. Komplektas siauriems ruošiniams. Purškimo įrenginys PUR apdorojimui. Laisva vieta, pvz., griovelio agregatui. Siūlų frezavimo agregatas storesnei briaunos medžiagai. Gulsčias kirtimo agregatas. Masivos medienos briaunos iki 15 mm. Apžiūra pagal susitarimą. Iiedozcb Dhopfx Alrsc

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Parduodama: Premium klasės Holz-Her 1329 Multi briaunų klijavimo staklės + Return-Master 5920 grąžinimo sistema Parduodame aukštos klasės Holz-Her 1329 Multi briaunų klijavimo stakles su Return-Master 5920 grąžinimo sistema. Įrangai – 4 metai, ji yra puikios būklės. Iijdpfx Aoygrghslrjc Pradinė nauja kaina: 138 000 € + PVM Mūsų kaina: 69 000 € + PVM (sutaupote 50%) Kodėl verta rinktis šią įrangą? Įsigykite aukščiausios klasės, mažai naudotą įrenginį už subsidijuotos įrangos kainą – be jokios biurokratijos, dokumentų tvarkymo ar ilgalaikių įsipareigojimų, kurių reikalauja paraiškos dotacijoms. Priežiūra: Reguliariai aptarnauta kvalifikuotos Dimpex techninės komandos. Rezultatyvumas: Aukščiausios komplektacijos „Multi“ modelis – universalus gamybos poreikiams. Prašome kreiptis tik rimtiems pirkėjams.

Būklė: naudotas, Gamybos metai: 2014, Plokštės judėjimo kryptis: nuo operatoriaus į dešinę Maks. briaunos storis: 3 mm Min. ruošinio storis: 8 mm Maks. ruošinio storis: 60 mm Min. ruošinio plotis: 65 mm Min. ruošinio ilgis: 160 mm Padavimo greitis: 10 m/min Klijavimo agregatas: Taip, su dviem frezavimo agregatais Klijavimo įrankis: deimantinis frezavimo peilis Skersmuo: 70 mm Aukštis: 48 mm Įvedimo liniuotės reguliavimas: rankinis Atpjovimo žirklės iki: 3 mm Briaunos individualus padavimas: galimas Klijavimas: GlueJet Poliuretano klijavimas: galimas Atpjovimo pjūklas: taip Kombinuotas agregatas lyginimui/fazavimui/radiusui: pneumatiškai reguliuojamas Suapvalinimo agregatas: pneumatiškai reguliuojamas Profilinė grandyklė: taip Plokščia grandyklė: taip Agregatų indikatorius: ekrane Valdymo tipas: per pabaigos jungiklį Valdymas: valdymo pultas su mygtukais Važiuoklė: ne Ištraukiama ritinėlių atrama: taip Apsauginis gaubtas: taip Darbo arba pakrovimo stalo aukštis: 874 mm Svoris apie: 1400 kg Dulkių nusiurbimo skersmuo: 160 mm Sandėliavimo vieta: Iiedpfx Alsylpwujroc