Lenkimo presas

YAWEI PBH220/3100-7C

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Redpfx Aljfz U S Eocjch Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, mašinos/transporto priemonės numeris: 34435, eigos ilgis: 200 mm, gerklės gylis: 405 mm, darbinis greitis: 21 mm/s, atbulinės eigos greitis: 180 mm/s, stalo aukštis: 970 mm, alyvos bako talpa: 350 l, bendras svoris: 11 500 kg, bendras ilgis: 4 945 mm, bendras plotis: 2 000 mm, bendras aukštis: 2 995 mm, galia: 37 kW (50,31 AG), įėjimo įtampa: 400 V, įėjimo srovė: 63 A, įėjimo dažnis: 50 Hz, spaudimo jėga: 170 t, tarpas tarp stulpų: 2 600 mm, atstumo lentelė iki stūmoklio: 400 mm, ramplokštės ilgis: 3 050 mm, stalo ilgis: 3 050 mm, stalo plotis: 120 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, Hidraulinis lankymo presas LVD EASYFORM 170/30 Touch-B Pagaminimo metai: 2012 Serijos numeris: 34435 Rodpfszk H A Djx Alcoch Techninės specifikacijos Jėga: 1700 kN Darbinis ilgis: 3000 mm Atstumas tarp stulpų: 2600 mm Eiga: 200 mm Atstumas nuo stalo iki preso galvutės: 400 mm Atstumas: 405 mm Turbina: PP5400 Greitasis poslinkis: 128 mm/s Darbinis greitis: 22 mm/s Grįžtamasis greitis: 200 mm/s Svoris: 11500 kg Variklis: 37 kW Alyvos talpa: 350 l Svoris: 11500 kg Ilgis x plotis x aukštis: 4945 x 22000 x 2995 mm VALDYMO SISTEMA COMMAND CONTROL TOUCH-B – • Stalas PP8170 V-ašis • EFL 90 • viršutinis įrankių tvirtinimas PP3090 – Wila • hidraulinis viršutinių įrankių tvirtinimas PP3100 • PP3160 hidraulinis V formos štampų tvirtinimas • galinis atraminis liniuotė X R Z1 Z2 X’ • Apsauga; CE PP3580 – lazerinė apsauga • 2 atraminiai laikikliai

Būklė: naujas, Gamybos metai: 2026, - Capacity: 2070 x 6 mm - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll Redpfjlht N Iox Alcjch - Centralized lubrication system - Brake motor - Emergency stop - Documentation - 400V

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 150 mm, šlifavimo juostos ilgis: 7 000 mm, aukščio reguliavimo tipas: elektrinis, bendras aukštis: 2 200 mm, bendras ilgis: 3 550 mm, bendras plotis: 2 000 mm, bendras svoris: 870 kg, šlifavimo ilgis: 1 500 mm, ruošinio svoris (maks.): 80 kg, ištraukimo jungties skersmuo: 180 mm, šlifavimo plotis: 950 mm, sukimosi greitis (maks.): 1 435 aps./min, reikalingas aukštis: 2 200 mm, vietos reikalavimas ilgis: 3 550 mm, reikalingas plotis: 2 000 mm, stalo aukščio reguliavimas: 500 mm, Įranga: dokumentacija / vadovas, Belt Grinding Machine MS92-150 3-roller redirected abrasive belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine base with connecting elements - Continuously variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric height-adjustable table - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment abrasive belt Rcodpfx Aotwb U Aslcjh - Operating instructions + manufacturer’s declaration - CE-compliant design The robust machine frame made of welded steel construction ensures extremely quiet operation. The two machine bases have an offset to allow sanding of workpieces longer than the machine table. The abrasive belt runs over 3 deflection rollers, providing a maximally accessible working area for the operator, ensuring good handling especially with manual sanding blocks. The belt drive is powered by a three-phase motor with a balanced drive pulley. The belt has adjustable pneumatic tension. The dust collection system is adequately sized to capture the resulting grinding dust and channel it to the extraction nozzle, provided it is connected to a suitable extraction system. For fatigue-free operation, the grinding unit is mounted in backlash-free linear guides. The machine table can be quickly and easily adjusted to the correct workpiece height using the electric table lift. The table lifting guide elements are maintenance-free. For loading, the table can be extended so that workpieces do not have to be pushed under the abrasive belt during placement. The electrical controls for the main functions are user-friendly and centrally located on the machine. Machine paint: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The basic machine is supplied with one initial equipment belt (WxL) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Optional accessories: 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted centrally under the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing assembly with the rotation axis, which has a brake disc mounted on the rear. The swivel assembly is mounted on the front of the rotation axis and can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional index plate is mounted on the swivel head to allow fine alignment of the workpiece to the abrasive belt. Unlocking of the rotation and swivel axes is performed pneumatically via foot switches; movement of the rotation axes is manual. Maximum workpiece weight when used as a flat table with insert frame = 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate) = 25 daN or 120 Nm (relative to the center of the rotation axes).

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As the manufacturer, we offer you the highest precision and efficiency with a capacity of 3,050 mm bending length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transport, installation, commissioning, and offer you a one-year warranty as well as fast and reliable support. Visit us and see for yourself the quality and versatility of this premium machine. Standard Equipment - Capacity (length - tonnage): 3,050 mm – 175 t - Open height: 530 mm - Throat depth: 450 mm - Stroke: 265 mm - Servo drive - Y1, Y2, X – 3 axes - Control unit: DT 15 - Manual F. AKAS FPSC safety system - CE-compliant Fiessler Akas - Servo motor back gauge with linear guide & ball screw system Rsdpfx Aotr Dk Eslcsch - Manual crowning - European tool clamping system - Movable front sheet supports Options - DELEM 69S CNC control (3D controller) - Motorized crowning - 6 axes: X = 650 mm; Y1, Y2, X, R, Z1, Z2 (6-axis CNC press brake configuration) - European lower tool M.460R.85 - European upper tool P135.75.R08

Būklė: naujas, Gamybos metai: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Bar for hanging parts * Convection (uniform temperature throughout the oven) * Safety locks for secure opening and closing * Maximum operating temperature: 230 °C. TQ0906 Powder Coating Booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3200 m³/h * Hermetically sealed lamp: 1 pc * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for dispatch. Rjdpfsfgnytox Alcoch CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. have a WE certificate. We offer our own transport – prices are negotiated individually for each order. We issue VAT invoices. Short lead times! Option to order machines in various customised configurations and dimensions. Please do not hesitate to contact us.

Gamybos metai: 1995, būklė: naudotas, Complete water-based painting plant with 865 linear meters of conveyor chain with tracks, Sames reciprocators with rotary cups, generators, paint pumps, sanding benches, and accessories. Rcjdpfeit Rrvjx Alcjh

Gamybos metai: 2020, būklė: naujas, 7" Touch Panel The large color touch panel is aesthetically pleasing and provides comfortable and intuitive operation. All key parameters can be set directly on it. Memory for 20 Programs with 10 Events It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is especially required for more demanding processes. Gas / Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of each specific cycle, plan consumption, and monitor personnel. Dual-Channel Recorder with USB Cycle Parameters Each furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to a flight data recorder—onto a USB stick. The system also allows analysis of monthly/daily reports, including media consumption and performance. Every heating cycle, each time the door opens, is tracked for several years. Such a dedicated solution is not offered by any other manufacturer. It is a system developed from scratch by our programmers: automatic smoke extraction flue Rsdofy Txyjpfx Alcech The chimney can be programmed to open several minutes before the end of the firing process to vent the chamber. It can be remotely controlled from the control panel and does not need to be operated mechanically as with most systems. Minute-by-Minute End Time Forecast The cycle has started—how long will it last? If we calculate the heating dynamics, the system will display the remaining duration on the screen. To open, simply pull the door. The lock features adjustable pressure on the door. To close, just push it shut—the lock catches the door and retracts it automatically. To minimize heat loss in the hall when the door is opened, a hood is installed above the door to divert part of the heat elsewhere. The MTS system was developed to provide true readings of the oven chamber temperature. Standard measurements are based on a single temperature reading, which is often inaccurate. MTS is a multi-sensor system, with sensors located at the furthest points of the chamber. The multi-zone heating system ensures a previously unmatched firing quality.

Būklė: labai geros būklės (naudotas), Techniniai duomenys: 2 hidrauliškai reguliuojami ritinėliai 2 atraminiai ritinėliai 3 varomieji ritinėliai CNC valdymas Rcjdpfx Alozv Ernoceh Veleno skersmuo: 80 mm Veleno ilgis: 160 mm Ritinėlio skersmuo: 224 mm Variklio galia: 5,5 kW perkeliamas valdymo pultas Matmenys (ilgis x plotis x aukštis): apytiksliai 1240 x 1460 x 960 mm Svoris: apytiksliai 1,4 tonos Būklė: labai gera būklė, mažai naudota Pardavėjas neatsako už rašymo ar duomenų perdavimo klaidas. Mašinos išvaizda, techninė būklė ir nusidėvėjimo laipsnis atitinka jos amžių; naudotos mašinos parduodamos be jokių garantijų.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, eigos ilgis: 365 mm, bendras svoris: 23 000 kg, bendras ilgis: 5 300 mm, bendras plotis: 1 900 mm, galia: 37 kW (50,31 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, spaudimo jėga: 320 t, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, DURMA AD-R 40320 CNC staklės – pagamintos 2018 m. Parduodamos DURMA AD-R 40320 CNC staklės, kurių presavimo jėga – 320 t, o lenkimo ilgis – 4 050 mm. Rcjdpezt A Axsfx Alceh Staklės pagamintos 2018 m., jos naudotos palyginti nedaug ir yra labai geros būklės. Pagrindinės techninės specifikacijos: • Presavimo jėga: 320 t • Lenkimo ilgis: 4 050 mm • Eiga: apie 365 mm • Pagaminimo metai: 2018 • Valdomos CNC sistema • Būklė: labai gera • Nedaug naudojimo valandų Stakles galima apžiūrėti iš anksto susitarus.