Lakštinio metalo šalinimo mašina

Ventus

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. Fpodod Ixadjpfx Ab Sjb The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 50 mm, bendras ilgis: 2 210 mm, bendras plotis: 1 530 mm, bendras aukštis: 1 940 mm, bendras svoris: 1 200 kg, įėjimo įtampa: 400 V, ruošinio aukštis (maks.): 50 mm, galia: 6 kW (8,16 AG), įėjimo srovė: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges on both outer and inner contours of stainless steel, steel, or aluminum parts that have been cut by laser, shear, or punch machines. This machine processes parts of various sizes, including products starting from 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, producing clean, smooth, and burr-free edges across the entire part. DM1100 C Working capacity (mm): 1100x50 Number of cross belt stations: 1 Cross belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Fodjtzfntspfx Ab Sepb Total power (kW): 6 Power consumption (A): 18 Exhaust connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. Fpodpfx Abjl Dw D Ej Seb With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Fpjdpjd Ev Upefx Ab Seb Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Gamybos metai: 2002, Sąlyga: naudotas, Diameter: 180 mm Fjdpfx Abjt Hw She Sepb Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Sąlyga: naudotas, Gamybos metai: 2016, Operating hours (machine): 5,320 h Max. feed width: 300 mm Processable sheet thickness: 1–15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Feed speed, stepless: 0–2 m/min Length: 2,600 mm Fpjdpfjv N I Hlox Ab Sob Width: 2,300 mm Height: 1,300 mm Machine weight: 1,900 kg Standard equipment - Equipped with a vacuum table for processing steel, stainless steel, and aluminium for part sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming flipping and reworking of parts is eliminated - By folding away the innovative turning station, parts with an edge length of more than 200 mm can also be processed on one side - High degree of automation enables economical and reliable processing even for large quantities of parts - High and consistent processing quality - Dry processing (no chemical additives necessary as with vibratory finishing) - Small parts are discharged on the infeed side into a collection box - No additional walking distances for the operator - Energy efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and easy tool changes - Simple and intuitive machine operation - Modern, compact machine design Additional equipment Extraction unit: Lissmac DDE 1500

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, We offer you the following: Fsdpfxjv Hxrgo Ab Sjpb Deburring Machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data and Features: - Abrasive belt change on the left side of the machine - Tool kit - Digital thickness display - Material at the infeed too strong - Electro-pneumatic control of oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatic system - Pneumatic lifting and lowering of units when switching aggregates on or off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extension at front and rear, each with 1 roller - Industry 4.0 (LAN) package with network LAN connection - Working width: 1350 mm - Machine with movable head - Centesimal stroke system with inverter - Usable working height 160 mm - LED lighting inside the machine - Electronic belt control for longitudinal units - Calibration sanding unit with sanding roller, diameter 190 mm, belt length 2620 mm - Electromechanical grit setting - The frequency converter allows adjustment of the sanding belt speed - V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving counter-rotating to each other. By combining these two movements, the V-Spin unit is suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm, Scotchbrite + abrasives, grit size 80 - 16 backing pads for V-Spin units, diameter 80 mm, Tampico + grit size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads, each head containing 3 pads of rotating sanding brushes, diameter 123 mm. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 Shore, smooth surface - Belt cleaning blower for conveyor carpet, incl. vacuum extraction - IPC MONITOR 15" touch-screen control for operating the machine, up to max. 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual signal when machine operation starts - Operating hours counter - Automatic control of feed speed depending on processing performance (expressed in sqm). This enables, based on statistic data, a longer service life of the sanding belt. The machine is in very good condition and comes with 2 Euro pallets of new sanding belts. Accessories, tools and clamping devices shown are only included in the scope of delivery if mentioned in the additional information. Technical specifications and details may be subject to change and errors. Subject to prior sale!

Sąlyga: naujas, Gamybos metai: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Bar for hanging parts * Convection (uniform temperature throughout the oven) * Safety locks for secure opening and closing * Maximum operating temperature: 230 °C. TQ0906 Powder Coating Booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3200 m³/h * Hermetically sealed lamp: 1 pc * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for dispatch. CHOOSE BUMEX SP. Z O.O. Fpodpfx Aofgnytob Sjb Very high quality of machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. have a WE certificate. We offer our own transport – prices are negotiated individually for each order. We issue VAT invoices. Short lead times! Option to order machines in various customised configurations and dimensions. Please do not hesitate to contact us.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, veikimo valandos: 31 486 h, Vidutinio formato Darbo valandos: 31 486 val. Kaina pagal užklausą Fjdpfx Abexl R I To Sjpb

Sąlyga: naujas, DM100 ZC – Performs edge rounding and removes sharp burrs on both inner and outer edges of steel, stainless steel, or aluminum parts after laser-cutting, shearing, or punching of metal parts from a minimum size of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) and abrasive belt, removing heavy burrs in the initial step. Fpsded Hintspfx Ab Sob The second station is equipped with two counter-rotating cross-belts with abrasive blocks, rounding the edges of the entire product, both inside and outside, in a second step. A key advantage is deburring products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 ZC: Working capacity (Ø mm): 1100 x 100 No. of belt stations (Z): 1 No. of cross-belt stations: 1 Abrasive belt, dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230 x 2300 x 2250 Weight (kg): 3300