Automatinės strypų tekinimo staklės

Traub TNL12

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, TECHNICAL DATA Spindle Head Maximum Bar Diameter (mm): 13.0 Material Quality (DIN 671) (mm): Ø X h9 Collet, optional: Through-hole Guide Bush, optional: Through-hole Max. Turning Length / Spindle Stroke With Fixed Guide Bush (mm): 130 With Rotating Guide Bush (mm): 80 With Programmable Guide Bush (mm): 80 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Rapid Traverse Z1 (m/min): 30 Tool Carrier 1 Slide Travel X1 (mm): 35 Slide Travel Y1 (mm): 38 (-10 +28) Rapid Traverse X1 / Y1 (m/min): 15 Tool Stations (number): 6 (12) Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Tool Carrier 2 Slide Travel X2 (mm): 35 Slide Travel Z2 (mm): 50 Rapid Traverse X2/Z2 (m/min): 15 Tool Stations (number): 6 Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Driven Tool System for Tool Carrier 1 and 2 Speed (min⁻¹): 0...8000 Maximum Number of Tools: 2x6 Clamping Range for Drilling Tools (mm): 0.5-7 Sub-Spindle / Front Device Maximum Bar Diameter (mm): 13.0 Maximum Longitudinal Stroke 23, 24 / X3 (mm): 140 / 228 Rapid Traverse 23,24/X3 (m/min): 30 Tool Stations (number): 4 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Gsdpfxoyr N Dzo Ab Sstw Backworking Attachment, Synchronous / Fixed Z-Axis Stroke Synchronous with Work Spindle (mm): 80 Tool Holder Diameter (mm): 20 Tool Stations (number): 3 Backworking Attachment (X4 Axis) X4 Stroke (mm): 39 Rapid Traverse (m/min): 15 Tool Holder Diameter (mm): 28 Tool Stations (number): 4 Driven Tool System for Backworking Attachment (with X4 Axis) Speed: 0...10,000 min⁻¹ Maximum Number of Driven Tools: 4 Clamping Range for Drilling Tools Driven (mm): 0.5 - 7 Non-driven (mm): 0.5 - 10 Coolant System Pump Pressure, single-stage (bar): 3 120 bar Pump for Front/Rear Attachment Tank Capacity (l): 180 Flow Rate (l/min): 40

Būklė: naudotas, Gamybos metai: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power at 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power at 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power at 25% duty cycle: 5.8 kW Tool interface: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Equipped with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH clamping chucks Spanntop Godpfswp D Nbsx Ab Setw 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Būklė: naudotas, Gamybos metai: 2008, Sukimosi skersmuo: 12,7 mm Gtodpfx Ajygm R Iob Sow Sukimo ilgis: 50 mm Valdymas: Traub System TX 8i Sukimosi greitis: 12.000 aps./min c ašis: 0,001° Perėmimo stotis: 12,7 mm Greitas važiavimas: 15 m/min Revolverinė galva (daugiavietė): 6 Įrankių sistema: 5+3 3 įrankių sistemos Bendras galios poreikis: 2,5/4 kW Staklių svoris: apie 2 t Užimamas plotas: apie 2,4 x 1,1 x 1,7 m CNC trumpų detalių tekinimo staklės Traub TNL 12K su LNS Tryton 112 strypų padavėju S8 pavara (galinis apdirbimas su pavaromais įrankiais) yra S7 pavara (priekinis apdirbimas su pavaromais įrankiais) yra

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 19 441 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6000816, tekėjimo ilgis: 50 mm, veleno greitis (maks.): 12 000 aps./min, strypo praėjimas: 12 mm, valdiklio modelis: Mitsubishi TX-8i, priešpriešinio veleno didžiausias greitis: 12 000 aps./min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front attachment Number of stations: 4 Godpfxox Hxv Do Ab Sotw Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with electrical cabinet, max. configuration: 2,000 kg Weight without electrical cabinet, max. configuration: 1,600 kg Weight with electrical cabinet, min. configuration: 1,200 kg Weight without electrical cabinet, min. configuration: 850 kg Operating hours Control on-time: 19,441 h Automatic operation 1: 7,607 h Automatic operation 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface pre-installed Various fixed tool holders Rinsing gun

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, 1.0 unit Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Model: Single-chamber cleaning system Internal tank dimensions: 750 x 600 x 770 mm Gjdpfx Aev Nztxsb Setw Year of manufacture: 2022 THE DEVICE HAS NEVER BEEN IN OPERATION.

Būklė: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Gsdet E Dbyopfx Ab Sotw Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 26,709 h SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 16,854 h - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm - Z stroke: 50 mm - Driven tool speed: 8,000 rpm LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm * Y travel: -9.5 / +28 mm - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 16 kVA WEIGHT AND DIMENSIONS - Required space: 2,850 x 1,100 mm - Machine height: 1,480 mm - Machine weight: 2,000 kg EQUIPMENT/ACCESSORIES - Control system: Traub TX 8i - Powered guide bushing - Parts catcher - Parts conveyor Gtodpfxjuhawhj Ab Sjw - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 l * with paper filter - Bar feeder: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected load: 24 kW Main Spindle Max. bar capacity: 18 mm Max. spindle speed: 12,000 rpm Corner speed: 5,000 rpm Travel Z: 205 mm Rapid traverse: 40 m/min Measuring system resolution Z: 0.001 mm Feed force: 3,000 N Spindle nose / short taper: Traub short taper mount Gsdpfx Abswg Taks Sotw Max. clamping force: 1,400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm² Total cylinder stroke: 5 mm Clamping tube thread: M25 x 1 Counter Spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. spindle speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Upper Tool Turret with B-Axis Number of stations: 8 Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of stations: 7 + counter spindle Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tool System for Upper Turret Number of driven stations: max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System, Backworking Unit Number of stations: 7 Number of driveable stations: max. 3 Pitch distance: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF DELIVERY Includes (not an exhaustive list): - Traub CNC lathe - Tool holders, driven and non-driven - High-pressure and band filtration system - Oil mist separator - Fire suppression system - Chip conveyor - Bar feeder - Operating documentation Full scope of delivery according to photo series No guarantee for the accuracy, completeness or timeliness of the information provided.

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] Gtedpeuhav Defx Ab Sew - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 Gtodpfxjuhaw Ue Ab Ssw - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag

Būklė: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 32 870 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6030578, tekėjimo skersmuo: 32 mm, veleno greitis (maks.): 8 000 aps./min, Strypo skersmuo (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Gtjdpfx Asvldx Aeb Ssw Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Sub spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Barfeeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine includes a large number of fixed and driven toolholders – see the attached photo for the list.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] Gtodpfouhaxfex Ab Sow - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle Gedpfx Ajuhawzsb Sjtw - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of jaws and collets for bar feeder magazine - Set of spare parts

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 83 kW (112,85 AG), bendras svoris: 6 000 kg, bendras ilgis: 460 000 mm, bendras plotis: 4 000 mm, bendras aukštis: 4 300 mm, Gamybos metai: 2024, veikimo valandos: 300 h, įvesties srovės tipas: trifazis, Parduodame pilnai veikiantį metalo laužo žirkles / aligatoriaus žirkles. 2023 metų pabaigoje ATM atliko kapitalinį remontą. Gedpfsq Nmw Iex Ab Setw - Paruoštos iškart darbui - Remontų nereikalauja - Pridedamos 4 poveržlės Naudojimo sritys: - Varinių, cinko, švino katodų pjovimas iki 25 mm - Automobilių radiatorių pjovimas iki 105 mm aukščio - Aliuminio lakštų, profilių, strypų, vamzdžių pjovimas iki 25 mm - Varinių, aliuminio, švino vamzdžių pjovimas iki 105 mm aukščio - Nerūdijančio plieno lakštai iki 16 mm - Plieniniai profilio vamzdžiai, lakštai, vamzdžiai, strypai, plokščios geležtės Aligatoriaus žirklės, metalo laužo žirklės, katodų žirklės, žirklės, smūginės žirklės, hidraulinės žirklės, lakštų žirklės, giljotinos žirklės, katalizatorių žirklės, stalo žirklės, automobilių radiatorių žirklės, kabelių žirklės, vamzdžių žirklės.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] Gtodpfxouhawuj Ab Sow SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar feeder magazine - Tool presetting device