Optimizuotas skersavimo pjūklas Stromab TR 500, 2005 m.

Stromab TR 500 TR

Sąlyga: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Dedpfx Ajxiza Uef Heku

Sąlyga: naudotas, Gamybos metai: 2016, bendras aukštis: 1 600 mm, bendras ilgis: 14 100 mm, bendras plotis: 1 600 mm, Weight: 2,500 kg - Year of manufacture: 2016 - Documentation available: Yes - CE marking present: Yes - Serial number: 6237 - Voltage [V]: 415 - Power consumption [A]: 20 - Transport dimensions: 14,100mm x 1,600mm x 1,600mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages: 4 Dkedewnh N Nspfx Af Heu Financial information VAT: The stated price is plus VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for everything in the industrial sector Glenn Smeets

Sąlyga: naudotas, Gamybos metai: 2002, mašinos/transporto priemonės numeris: 220992, STROMAB CROSSCUT SAW WITH ELECTRONIC PUSHER MOD. TR 500 MATRIX – CE STANDARDS – USED - infeed roller table and MATRIX electronic pusher 6000mm - outfeed table 1500mm - 10 HP motor - blade diameter: 500mm - blade rotation speed: 3500 rpm - maximum cutting capacity: 360 mm (W) x 55 mm (H); 200 mm (W) x 135 mm (H) - minimum cutting section: 20 (W) x 10 (H) mm - ELCO CNC control - 415 volt - s/n 220992 Djdpjt U I A Hsfx Af Hoku - year 2002

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Dksdohw Ng Ijpfx Af Hsu Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 seconds Dkedpfx Ajv A Htdof Hju - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over the cross-cutting unit - CE-standard - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction port: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision racks and length measurement via servomotor - Pneumatic lift of the pusher at end of cycle and top return path - Photocell for workpiece length measurement - Photocell for defect detection – marking with fluorescent chalk - Worktable incline: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly in the machine controller - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet ports - Includes "OPTI" function for automatic measurement of the workpiece to be cut. Optimized for processing material with variable lengths, with single or pack feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes "OPTI PLUS" function for mark detection, ensuring full optimization and removal of knots and defects - Markings with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Sąlyga: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 1377, STROMAB TR 500 PNEUMATIC MITRE SAW – CE CERTIFIED – USED - equipped with 4000mm TIGERSTOP electronic positioning stop - 4500mm infeed roller table - 4500mm outfeed roller table - 500 mm diameter blade - maximum cutting capacity: 360 mm (W) at 60 mm (H), 135 mm (H) at 280 mm (W) - 10 HP motor - 415 volts - serial no. 1377 - year: 2007 Dedst U Izpopfx Af Hjku